Structural Mechanic Aircraft

*** ***** ******

Pensacola, FL *****

***********@*********.***

Phone: 850-***-****

Fax: 850-***-****

Detwler O. Billups

Summary

Education

Experience

Demonstrated abilities in providing a high level quality product at the most cost effective method, while implementing Lean Management Principles.

Embry-Riddle Aeronautical University, Daytona Beach Regional Airport

Bachelor of Science Degree Aeronautical Studies, Area of Concentration in Flight Technology, December 1980

Flight Credentials - Certified Flight Instructor 266132458, Commercial

Instrument Single/Multi Engine Land License First Class Medical Certificate

No Limitation.

Furgerson Flying Service, Pensacola FL, Certified Flight Instructor,

March 84 – July 84

Northrop Grumman Blueprint Reading Class - June 1997

Vought Aircraft Inspection Class - Certified P.A., January 1999

Leadership Training – Certificate, November 2004

W.J. WOODHAM High School, Pensacola, FL, High School Diploma

June 1977

Elite Mechanical

8804 Grow Drive

Pensacola fl.32514 01/03/2018 to 08/31/2018

HVAC Sheetmetal Mechanic

Duties: Foam, Fabricate and Install sheetmetal duct for commercial Heating

And air system, utilizing blueprint and installation Drawing. Measure

And hang sheetmetal Duct for buildings, Frame and build block out for brick and block wall for fire damper. Build roof top curb for air handler and exhaust fans. Installed louver in wall for intake outside air and for exhaust. Insulate and seal and modify duct as require to meet building specification. Pressure test duct to meet specification and adjust damper for correct CFM output. Build air handler unit and connecting duct work plentum from Blueprint. Work off punch list for final inspection, and coordinate helper and plan daily work production. Perform pipe fitting in small amount. Running hangers and joining pipe to install on cooling tower systems, running chilled water lines. Drive company vehicle for pick up and delivery to job site of needed material to accomplish certain job task.. keep time sheets and tur in time to office manager,

Billups Handyman service

710 baker street. Pensacola Fl.

10/2015 to 11/2017

Duties; Performing repair on residential and commercial building, doing plumbing, electrical and mechanical repairs. Installing tiles, cabinets, interior and exterior doors, gutters, storm doors, building decks, and private fences.

01/2014 -10/2015 Action Labor

2226 West Palafox Street

Pensacola, FL

Temporary employee at Vision Construction Company

Skilled Laborer: Duties included framing building, forming building concrete foundation, completing sheetrock work, pluming and installing metal door frame and doors .Performed metal stud work and metal flashing around roof to include basic roof work. Conducted general maintenance on building. Operated back hoe digging equipment, lull fork lift equipment, demo saws, and work grading electronic level equipment,

6/2013 -12/2014 Home Depot Corporation

Job location ; Home Depot Repair and Liquidation Center

180 West bridge Pkwy, Suite 300

McDonough, GA

Service Technician; Hired permanently by home Depot corporation performing same duties as listed below for select staffing.

10/2012 –06/2013 Select Source Staffing McDonough, GA

Job Location: Home Depot Repair and Liquidation Center

Service Technician

Examine, diagnose, troubleshoot and repair equipment sent in by Home Depot stores and/or customers. Equipment repairs include generators, lawn mowers, riding mowers, air compressors, hand and power tools, 4-cycle engine overhauls and carburetor repairs. Generator analysis and repair of engine and generator electrical head. Electrically trouble shoot wiring using wiring diagram, OHM meter, load tester and utilize wiring charts. Use computer system to order parts, prepare maintenance reports. Diagnose equipment and determine problem of repair unit on computer. Utilize part illustrated manuals and drawings. Used computer to pull up equipment part diagram, order part and look at equipment schematic diagram.

3/2012 – 9/2012 Village Inn Restaurant Pensacola, FL

Cook

Duties include grill cook, food prep and demonstrations. Prepare food orders in compliance with company specifications, recipes, and food platter presentations. Prepare food for line, prepare and bake a variety of pies and dessert items. Cook all items on restaurant menu by memory. Responsible for working as cook on all shifts, breakfast, lunch and dinner shift.

8/2011-11/2011 PEMCO World Air Services Tampa, FL

Structural Mechanic

Perform sheetmetal repairs on Boeing 757 and Boeing 767 Aircrafts. All repairs made in compliance with Standard Repair Manual (SRM) manual and engineering orders. Manufacture sheetmetal parts from print and from sample part(s). Remove floor panel, aircraft access panel, perform routine maintenance and work non-routine work orders. Perform aircraft wash and general indoctrination procedures. Remove, replace, manufacture all type aircraft structure parts to include longeron stringer, intercostal, web section in floor structure, frame and floor beam repairs. All repairs done in compliance with SRM and used all tools associated with aircraft sheetmetal manufacturing and maintenance practices.

8/2006-8/2011 Billups Handyman Service Pensacola, FL

INSTALLATION, REPAIRS & MAINTENANCE

Provide service repairs on small to medium size construction remodeling projects to include both interior and exterior work. Bathroom remodeling projects include installing sinks, faucets, showers, tubs, vanities, and ceramic tiles on floor and wall. Perform major plumbing repairs. Kitchens remodeling include remove and install kitchen cabinets, counter tops, sink, and faucets. Completed drywall repairs and plaster repairs. Refinish hard wood floors, cabinets and furniture. Install ceiling fans, light fixtures, electrical wiring, dishwashers, garbage disposals and garage openers. Install interior and exterior doors and frames. Painting exterior and interior surfaces. Repairs made resulting from wood rot damage. Built sun deck and privacy fence.

6/2005-8/2006 McNorton Mechanical Contractor Inc. Pensacola, FL

HVAC SHEETMETAL MECHANIC/INSTALLER

Form, fabricate and assemble HVAC sheetmetal duck systems from blueprint and installation drawings. Utilize an Autofold 516 Duct making machine, operate plasma cutting machine and duct board cutting machine. Form metal using roll forming and auto bending machine. Set up and operate forming rolls, block and form material and shape metals. Assemble and installed kitchen hood exhaust system. Remove and replace exhaust fan and exhaust duct system. Installed roof curb for fan and HVAC unit in roof. Installed gas pipe for Generac Generator. Installed residential Generac Generator. Pipe fit galvanize pipe for air compressor distribution system along with compressor and regulator. Install air hander and condenser unit change out including soldering copper lines, form and pour concrete slab for condenser unit and generator unit. Perform carpentry and sheetrock work as needed. Supervised one helper responsibility included administering work detail.

6/2004-6/2005 Comfort Air USA/Gulfside Mechanical Pensacola, FL

HVAC SHEETMETAL MECHANIC

Form, fabricate and install HVAC sheetmetal ducts for commercial heating and air conditioning utilizing blueprint and installation drawings. Measure and layout pattern in shop for cutting special fitting of sheetmetal parts. Measure and hang sheetmetal ducts for buildings. Frame and build block out for wall fire dampler, flashing around duct through interior and exterior walls. Insulate, seal and modify ducts as required to meet building specifications for inspection. Build air hander units from blueprint and installed work on all gauges and sheetmetal. Manufacture and modify sub assemblies for major frame structure. Supervise top helpers and labors assigned to work under me at the job site. Assign job task to laborers and helpers. Coordinate with General Contractor to complete job assignment at job site and production schedule. Completed leadership classes offered by company.

4/2003–6/2004 Self Employed – Home Repairs Pensacola, FL

HOME REPAIRS and MAINTENANCE

Worked independently on home repairs and home remodeling. Work

completed include ceramic tile, flooring, and hardwood floor installation.

6/2002–4/2003 Plane Tech Aircraft Maintenance Lake City, FL

AIRCRAFT MECHANIC

Perform sheetmetal repair. I.A.W. SRM on Boeing 737, B727, Airbus 319, 320 and DC-9 MD Aircraft(s). Repair, remove and replace hourglass skin, keel beam skin, belly skin, and window belt modification on DC-9 aircraft. Installed security door modification on DC-9 and B737-200 series aircraft. Work completed on interior of B737 aircraft and Airbus 320. Lavatory, bulk head, seats, floorboards, galley removal and replacement. Perform normal sheetmetal repair to seat track r, longeron, stringer and rib repair and skin patches. General corrosion removal and repair. I.A.W. SRM for assigned aircraft. Work non-routine work order and engineering. Disposition on engineering order with certain close tolerance specification.

6/1997-5/2002 Vought Aircraft Industries Northrop Grumman Perry, GA

AIRCRAFT MECHANIC

Built aircraft emergency over wing exit door, assemble sheet metal part to form basic structure, rivet sheet metal skin to structure, installed door mechanism and rig for inspection. In plant P.A. Inspector able to buy off all inspection items line fastener installation. Held check seal, sealant inspection, rigging, etc. Worked in assembly. Built sheet metal sub assembly for 737, 747, 767 Aircraft including floor beam. Read blueprints and built from blueprints for engineering orders.

2/1996-6/1997 STS Aviation Labor/Mobile Aerospace Mobile, AL

SENIOR SHEETMETAL MECHANIC

Working on the Airbus A300, and A310 Retrofit Program. D.C.9. Overhaul and major sidlum. 737 overhaul and freighter conversion. 727 passenger to freighter conversion. Accomplishing modification of Gilliner sub-structure floor beam modification over wing station. Avionics Bay Drain Modification, Ball Mat Repair, and Wing Engine Pylon Modification. Duties include working on Boeing 747 Section 41 update and Pylon Modification for engine structure. Specifically #4 Engine, tank structure and wing structure at that station. Make sheetmetal repair in compliance to SRM specification, and general non-routine discrepancy work and working engineering repair order pertain to specific repair. Also perform blueprint work off E.O. and service bulletin for Airbus Retrofit Program. Remanufacture parts from sheetmetal stock using brake, shears, hardening technique, bending metal and forming parts from forming blocks, drilling, sanding, and alodine parts.

2/1994-2/1996 Gulfside Mechanical Inc. Pensacola, FL

SHEETMETAL MECHANIC

Form fabricates and installs ducts for commercial heating and air conditioning units utilizing blue print and installation drawings. Measure and hang sheetmetal ducts for buildings and structures. Insulate, seal and modify ducts as required to meet building specifications, Build air handler units from blueprints. Work with all gages of sheetmetal. Manufacture and modify sub assemblies from major frame structures.

1/1991-2/1994 Beech Aerospace Support Services Inc. Corpus Christi, TX

AIRCRAFT MECHANIC

Inspected aircraft worker and aircraft mechanic job task as a Collateral Duty Inspector (CDI) under the quality assurance office. Assigned and supervised aircraft workers job task on T-34 and T-44 aircraft. Performed tool aircraft maintenance, structural and system overhaul of T-34/T44 aircraft. Performed PT-6 engine maintenance including hot section inspections. Performed all flight control and landing gear system rigging. Removed and installed outer wing from main fuselage. Primary areas of responsibility included airframe sheet metal modifications (AFCS) and complete sheet metal overhaul including external skin and internal support structure disassembly, modification, repair and installation.

7/1989–11/1990 Grumman St. Augustine Corporation St. Augustine, FL

AIRCRAFT LEAD MECHANIC

Worked on 707/727 100/200 series aircraft. Incorporated the following modifications; passenger to freighter, cargo door and seat track, smoke detection system, oxygen bottle, avionics rack and pilot/co-pilot seat track modifications including installation of all primary and secondary structure. Additional installed 9-G net, restraint fitting, floor panel links, aft tract extension, gill liner and air conditioning. Performed the following inspections C-4/C-2; pressure bulkhead; aging aircraft inspection (lab joints, keel beam, 1183-I-beam performing their duties and provided input during employee’s annual evaluation period. Wrote repair orders. Coordinated with planners and estimator regarding time required to accomplish work order repairs. Wrote non-routine work discrepancies. Extensively utilized blueprints, aircraft drawings, modification instructions, installation data packages, standard repair maintenance and illustrated parts manuals to performed aforementioned tasks.

7/1987-2/1989 Lockheed Georgia Corp Marietta, GA

STRUCTURAL MECHANIC AIRCRAFT ASSEMBLER

C-5A/C-5B aircraft structural assembler. Responsible for pattern lay off from installation drawings. Installed pattern lay off from installation drawings. Installed pressure sheet-metal skills, skin sub-structure and in-flight refueling probe structure. Installed frame assemblies in jig fixtures, performed close tolerance drilling and skin scratch repair. Sealed aircraft for pressure check during final assembly.

5/1984–6/1987 Naval Aviation Depot Jacksonville, FL

SHEETMETAL WORKER

Performed work on FA/18 and P-3, A-7 aircraft. Worked with McDonnell Douglas representative on installing airframe modification changes on older FA/18 aircraft to bring them to the latest configuration being produced at the facility. Performed final inspection for clearance and sale of aircraft. Accomplished and assisted electricians and mechanics of the following system checks; rigging, landing gear drop check; tail hook, trailing/leading edge flaps, aileron, and trailing edge/aileron shroud. Installed bladder tanks in fuselage area. Worked with composite materials and extensively utilized but not limited to the following tools; rivet gun, Jo-bolt tools, drills, brake press and cold working tools.

1985 -1987 Jacksonville Navy Flying Club Jacksonville, FL

FLIGHT INSTRUCTOR

Served as a part-time flight instructor teaching basic private and advanced commercial pilot training courses and ground schools.

REFERENCES: Furnished Upon Request

Contact this candidate