Energy Ltd Facility I
Resume:
Isioro Ewoma Keshi’ Resume
Curriculum vitae
PERSONAL DATA
Isioro Ewoma Keshi
Tell: 081********, 081********
Email: ******.*****@*****.***
EMPLOYMENT HISTORY
NLNG MSC 4
Project Bonny
Island Rivers.
Design
Engineer
I hold meetings with clients to outline nature of
pressures structures are exposed to
Start:
Jan 2021
Till date
Company Project/Location Designation Duties Duration Ponticelli Nigeria
Ltd.
I make designs ranging from conceptual stage,
as-built modification, shop drawings for
fabrication and construction using Autocad, and
Micro station
I research, design and create structural
models which are in conformance with BS, BS-
EN, ASTM, ISO International codes & standard
for Structures used by NLNG at Bonny Island
oil facility
I present designs and perform demonstrations of
structure prototypes for the approval of clients.
I evaluate the function, safety and appearance of
structures to ensure they have a practical design. I also source for clients and manage a data base
to introduce new products as it affects their
businesses
I make site visits and walk about to inspect
proper setup for structures designed for
shutdown and routine maintenance.
I get approval for drawings and designs from
authorized office departments before handing out
documents to clients for implementation
I managed, budget and allocated project
resources.
I evaluate all man hours spent for various activities and prepare accurate reports for same and
maintain record of all project progress.
I determine and analyze the load capacity in
deferent ways it may be used, I develop virtual
models of different designs using computer
software not limited to (Staad pro and Autocad).
I design and analyze lift plans for several
complex lifts.
1
Isioro Ewoma Keshi’ Resume
Designspool
Engineering
Services
1.Scaffold Design
Analysis for MIDIS
energy Ltd at
Bonny Island
Rivers.
2. Twin Screw
Tug-boat design
for Dominion
Engineering &
Marine Services
Ltd at Akpos
Marine Jetty- Port
Harcourt Rivers.
3. Instrument Air
and Nitrogen Gas
line ISO drawings
for PWO at the
NLNG complex
Bonny Island.
Structural
Design
Consultant
I research, design and create structural models
for Structures used by contractors of NLNG at
Bonny Island oil facility
I determine the load capacity in deferent ways it
may be used, I develop virtual models of different designs using computer software not limited to
(Staad pro and Autocad).
I present designs and perform demonstrations of
structure prototypes for the approval of clients.
I evaluate the function, safety and appearance of
structures to ensure they have a practical design. I hold meetings with clients to outline nature of
pressures structures are exposed to
I also source for clients and manage a data base
to introduce new products as it affects their
businesses
I make site visits and walk about to inspect
proper setup for structures designed for.
I get approval for drawings and designs from
authorized office departments before handing out
documents to clients for implementation
I managed, budget and allocated project
resources.
I evaluate all man hours spent for various
activities and prepare accurate reports for same
and maintain record of all project progress.
DBN 1. Repair of IA
fire station,
warehouse and
workshop building
roof at NLNG
Bonny Island
QA/QC I Reviewed NLNG IA fire station, warehouse,
workshop building Roof replacement project
schedule using primavera p6 and MS project
I reviewed contract agreements and ensured
integrity of data during project life cycle.
I prepared required reports to provide support to all clients.
I managed, budget and allocated project
resources.
I maintained knowledge of all key project
milestones.
I designed an efficient engineering schedule and
prepared all vendor packages in coordination with
project technical leads.
I ensured compliance to schedule and managed
all project deliverables
Start:
Sept 2017
End:
Jan 2019
Dec
Start:
Feb 2019
End:
2020
2. Repair of DBN
Office building
roof at Bonny
Island Rivers.
I inspected site deliverables and maintained
record of all project progress.
I collaborated with all cross functional team to
maintain quality assurance for all activities.
I assisted to identify and resolved all issues in
normal operations and manage all
Communication for all schedule disruption.
I provided all update on information systems and
maintained all technical and non-technical
information,
I monitored all construction processes.
I performed audits on various plans and prepared
all required documents.
I provide required training to all subordinates.
I presented to stakeholders reports on progress
as well as problems and solutions.
I provided support to all construction control
operations and recommend improvements for
DBN through the duration of project at NLNG
Plant site at Bonny Island, Rivers.
I generated and advised on construction
technical queries (C TQ) on existing designs,
also AS-Built.
Homework
Consult and
Design
1.Donvile Estate
development at
Lekki Lagos
2. Twin duplex at
Magodo Lagos
Site
Engineer
I generated and interpret plan for projects
I monitored execution on site making sure they
conform to plans and schedules for each
deliverable at each phase of project.
I held meetings with clients and my management
to draw their attention to both concerns and
progress on site
I carry out logistics for both material and man
power to site
Start:
Nov 2016
End: Sept
2017
Malcom
Integrated
services
1. Three bedroom
flat apartment at
Sapele Delta
Engineer My job entails assisting the surveyor during surveying, development
I carried out assessment of building plans,
setting-out for construction.
I did on-site planning and execution of projects.
I held meetings with clients and my management
to draw their attention to both concerns and
progress on site
Start:
Feb 2016
End: Oct
2016
2
Isioro Ewoma Keshi’ Resume
3
Isioro Ewoma Keshi’ Resume
I carried out logistics for both material and man
power to site
Patoboh
Company
Limited.
1.statutory
inspection of
pressure vessels at
SEPLAT petroleum
Development
Company’s flow
station in Sapele
Delta
Site
Supervisor
My job entails planning and controlling of daily
activities on site during statutory inspection of
pressure vessels at SEPLAT petroleum
Development Company’s flow station in Sapele
west, Delta state
I held meetings with clients and my management
to draw their attention to both concerns and
progress on site
I carried out logistics for both material and man
power to site
Start:
Oct 2015
End: Feb
2016
Pivot
Engineering
(NYSC
POSTING)
1. Constructions of
cable trench, roads
and gear switch
building at N.E.P.A
sub-power station,
Alagbon-ikoyi
Lagos.
Trainee
Site
supervisor
I carry out daily assigned task for completion of
construction projects by planning, organizing and
controlling projects.
Completing quality inspections, supervising sub-
contractors and staff on site at N.E.P.A sub-
power station, Alagbon-ikoyi.
Start:
Sept 2014
End: Aug
2015
Federal road
Maintenance
agency
(INDUSTRIAL
TRAINING
INTERNSHIP)
1. Construction of
Gobadia carriage-
way at Ramout
Park, Ikpoba slope,
Benin City Edo.
Industrial
Trainee
I supervised the construction of Gobadia
carriage-way at Ramout Park, Ikpoba slope,
Benin City; from clearing and scarification of soil, laying of hard core and asphalt placement
(binder and surface wear).I also supervised the
construction of drains.
Start:
2011
End:
2012
EDUCATION
University Of Benin Edo state
B. Eng Civil Engineering 2007-2013
CERTIFICATION
NYSC Aug 2015
H.S.E 1, 2 & 3 Training Feb2015
PMI CERTIFICATION In-view
4
Isioro Ewoma Keshi’ Resume
PROFESSIONALSKILLS
I have Knowledge of Computer operation and maintenance. I am Proficient in web development and design with; html, CSS, JavaScript I am Proficient in MSOffice applications.
I am Proficient in use of adobe Photoshop.
I am Proficient in use of primavera p6 and MS project for project planning and monitoring. I possess good Knowledge of Networking.
I am able to create an efficient and friendly work team, I am Proficient in project planning and control, costing and scheduling. I have knowledge of construction procurement systems, contract documentation and administration. I have acquired experience in an oil and gas facility I am familiar with BS, BS-EN, ASTM, ISO International codes & standard PROFESSIONAL AFFLIATIONS
Nigeria Society of Engineers (NSE) - corporate member COREN (in view)
Nigeria Red Cross Society. - member
REFEREES
Mr. Abiodun Jibowu Mr. Matthias Kogoro
Broadview/Pivot Engineering, C.E.O Malcom Integrated services, Business Development 138New Orgorode road,
Victoria Island, Lagos. Sapele, Delta.
I am Proficient in preparing technical plans with AUTOCAD, PDMS, E3D, BLENDER, STAAD PRO, SACS, GTX Raster Cad, Micro Station and SOLIDWORKS modelling software.
Contact this candidate