Instrument Technician
Resume:
KRYZ MARRION COLIAT UMALI
Current Address: Conde LabacBatangas City, Batangas Philippines
•Philippines +639*********)
•*************@*****.***
Passport No:P7983676B
Expired: October 25,2031
POSITION APPLIED:
1:Instrument Commisioning Technician
2:Instrumentation Technician
3.Instrument Supervisor
CAREER OBJECTIVE:
To obtain a challenging position that could utilize my acquired capabilities to its full potential with an opportunity for growth based on performance and to enhance my knowledge and skills enable to perform my jobs as required by the company.
WORK EXPERIENCES:
JG Summit Petrochemicals
Barangay Simlong, Batangas City
Philippines 420
Trunk Line: +63-43-740-****
Field of Job: Instrumentation Shifter Technician (ISBL/OSBL)
November 3 2020 – Present
JGC Corporation / Technoserve Construction Company INC.
12th floor, Bank of Makati Bulding Ayala Avenue Extension, Makati City, Metro Manila 1209 Philippines
June 11, 2019 – April 25, 2020
Construction
Field of Job: Instrumentation Supervisor
Hassi R’mel Boosting Phase III Project
AKM Engineering Services Pte Ltd
10 Buroh Street, #03-15 Singapore (627564)
September 5, 2017- May 25,2018
Construction
Field of Job: Instrumentation Technician
ExxonMobil Asia Pacific PTE.LTD SAR-II 23 Tembusu Road
Singapore, 627596
Asahi Kokusai Techneion Singapore Pte Ltd
7, Third Chin Bee Road (618683)
November 16, 2016 – July 17, 2017
Process
Field of Job: Electrical and Instrumentation Technician
Singapore Refining Company Private LTD project Mogas Cogen
Rotary IMC PTE LTD
61 Jurong Island Highway Singapore 627860
November 12, 2015 - November 12, 2016
Process Maintenance & Construction Worker
Field of Job: Instrumentation Maintenance Technician at
Neste Oil Biodiesel Plant, 1 Tuas S Ln, 63730
Asahi Kokusai Techneion Singapore Pte Ltd
7, Third Chin Bee Road (618683)
June 1, 2012 – November 5, 2015
Process Maintenance & Construction Worker
Field of Job: Instrumentation Technician at
Petrochemical Corporation of Singapore (PCS)
100 Ayer Merbau Road Singapore 628277
OHM Engineering Pte Ltd
35 Tuas Road Singapore (638496)
May 5, 2010 – May 5 2012
Process Maintenance & Construction Worker
Field of Job: Instrumentation Fitter III at ExxonMobil Asia Pacific PTE.LTD
100 Jurong Island Highway Singapore 627867and
Shell BukomPulauUlarIsland
Project; Smell Abatement Facility Project.
Sanko Singapore (PTE) Limited
27 Pandan Crescent S (128476)
July 30 2009 – April 15, 2010
Process Maintenance & Construction Worker
Field of Job : Instrument Fitter cum Technician in Project at Shell BukomPulauUlar Island
Project: Ethylene Cracker Complex
Edgar Mercado Construction and Services
A Contractor of Siemens Power Corporation
Calicanto, Batangas City
June 2008 – March 2009
Project Coordinator
Certificate Of Appreciation And Recognition
Instrument Supervisor : April 20, 2020
Instrument Technician : February 8, 2017
Instrument Technician : November 30, 2016
DUTIES AND RESPONSIBILITIES:
•Maintain all instrument and control related equipment and systems on all the platforms. This will involve activities such as check, repair, replace, inspect, test, service, calibrate, adjust, remove, modify, install, etc. on all types of indicating, measuring, recording and controlling instrument and systems and loop check / loop test of instruments using Brain Terminal 100/200 and 375,475 hart communicator function and SFC. Validation and field & bench calibration of instrument.
•To do trouble shooting of Instruments
•Perform Calibration of PH meter and Conductivity meter,
•Preparation for maintenance shutdown, what are the things to be consider such pulling out and install, need to be change or calibrate,
•Read and interpret of the P&ID diagram, Pefs, location drawing, hook-up drawing, Pre-commissioning, commissioning, and pre-startup of plant. Knowledge in logics,
•Documentation and file maintenance. Maintain files, logs and drawings for all designated instrumentation and electrical equipment.
•Execute and implement all planned Preventative Maintenance activities related to Instrument Department.
•Review and update maintenance and other manuals related to Instrument department. Also prepare specific instrument related work procedures when assigned or required.
•Participate in all safety programs and training on the platforms such as emergency drill, firefighting and rescue exercise, safety meeting, audits etc.
•Participate and comply with the company’s Health, Environment and Safety policies and procedures.
•Preparing and supervising the workers for the scope of job to be taken, applying permit for hot work and cold work permit,
•Ensure all subordinates, co-workers, contractors and vendors strictly observe and comply with all company safety policies and procedures
•Report work status and perform special assignment as required by the engineer.
SKILLS:
•To do cable glanding and termination in instrument
•Supervise Continuity Check and Megger Check of Cable Spools and Inspection of Cable Trays and Supports
•To do bending of tube for impulse line.
•Installation of tubing from to 316 stainless steel tube schedule 0.065 from panel to instrument airline. From manifold to root valve, from regulator to instrument air supply line, Install both electronic and pneumatic such as controller, pressure gauges, and transmitter such level, pressure, flow and temperature.
•Computer literature, Basic AutoCAD 2D, MS Word, MS Power Point, MS Excel
SEMINARS ATTENDED:
Site Safety, Health & Security (A Safety Orientation)
Siemens Power Corporation
April 2007
TRAININGS:
QMT INDUSTRIAL AND SAFETY PTE LTD
38 TOH GUAN ROAD EAST #01-55
ENTERPRISE HUB SINGAPORE 608581
May 11, 2015 – May 12, 2015
Work-At-Height Course for Supervisor
Absolute Kinetics Consultancy Pte Ltd
64 hill view Terrace Singapore 669277
February 05, 2012 – February 26, 2012
Oil/Petrochemical Industry Safety Course for Supervisor
Institute of Technical Education Singapore
Assn. of Process Industry, 26 Boon Lay Way, #01-88 Trade Hub 21, Singapore
July 13, 2011
Electrical Fittings
Institute of Technical Education Singapore
Assn. of Process Industry, 26 Boon Lay Way, #01-88 Trade Hub 21, Singapore
December 29, 2010
Rigging and Material Handling
South Manila V&F, Inc.SWAGELOK
Unit II Building, II Oyster Industrial Complex NAIA Avenue
Cor. Kabihasnan Paranaque City, Philippines
July 14, 2009 – July 15, 2009
Tube Fitting Installation & Bending Training Course
ULTRA TECH Industrial Automation Services
San Pascual, Batangas City
May 26, 2009 – May 31, 2009
Theoretical and Hands-On for Artisan/ Technician
Advance Business Consultancy Centre Phils.Inc
ABCC Bldg. 127 M.H Del Pilar St., Batangas City, Philippines
November 22, 2008 – December 20, 2008
(Computer AutoCAD)
ON THE JOB TRAINING (OJT):
SIEMENS POWER OPERATION, INC
Trunk line :( 63-43-723-****
Fax :( 63-43-723-****
1500MW CCPS, Sta Rita, Batangas City, Philippines
April 2, 2007 – June 15, 2007
ADP Electrical and Enterprises
Telefax No: (043-***-****/(043-***-****
GulodLabak, Batangas City, Philippines
November 9, 2006 – February 24, 2007
Peyette Motors Corporation
Tel No: (043-***-****/402-0875
Conception, Batangas City, Philippines
January 12, 2006 – April 27, 2006
General Milling Corporation (GMC)
Tel :632-***-****
Tabangao, Batangas City, Philippines
October 15, 2005
EDUCATIONAL BACKGROUND:
Tertiary : Batangas State University
Alangilan, Batangas City, Philippines
Bachelor of Industrial Technology
Major in Instrumentation & Control Engineering Technology
April 26, 2004 – March 31, 2008
Vocational : Advance Business Consultancy Centre Phils. Inc.
ABCC Bldg. 127 M.H Del Pilar St., Batangas City
AutoCAD I
November 22, 2008 – December 20, 2008
PERSONAL IDENTIFICATION:
Place of Birth : Batangas Regional Hospital, Philippines
Nationality : Filipino
Sex : Male
Civil Status : Single
Religion : Roman Catholic
Height : 5’7”
Birthday : July 13, 1987
CHARACTER REFERENCES:
Mr.Leonides C. Lualhati
General Manager
San PascualBatangas City, Philippines
Mobile No: 091********
M.Y Manivanan
Manager/Calibration Project
Asahi Kokusai Techneion Singapore Pte Ltd
Mobile No: +659*******
I hereby certify that the above information is true and correct to the best of my knowledge and believe.
KryzMarrion Umali
Contact this candidate