ZAHEER ABBASS

Saudi Arabia Jubail

Mobile Number: 059*******

Email@: adpuyg@r.postjobfree.com

Post Applied for : RIGGING & CRANE INCHARGE

PROFESSIONAL OBJECTIVE:

Energetic, productive and highly skilled Rigger level 1 professional seeking career advancement within dynamic, high growth organization that welcomes fresh ideas, initiative, dedication and experience. Proven leadership, technical, communication skills.

Extra Activity: Mechanical Activities/Site Supervisor.

PERSONAL DETAILS

Father Name: Muhammad Inayat

Date of birth: 15.jan.1986

Religion: Islam

Iqama: 234-***-****

Nationality: Pakistani

Marital Status: Married

Mobile: +966*********

E-mail: adpuyg@r.postjobfree.com

Website: www.rigging.yolasite.com

ACADEMIC EDUCATION

High School (Dhunni Kalan from Mandi Baha Uddin)

Secondary school certification from Federal Board secondary school examination Gujranwala

Inter media tech collage from Mandi Baha Uddin (F.A)

B.A Degree from Mandi Baha Uddin UNIVERSITY OF THE PUNJAB)

Training Courses Attended / Additional Skills

1. Saudi SABIC Approved Rigger Level. I (Supervisor)

2. Standard Arabia Rigging Test (Level.1)Certification, KSA

3. Bureau Veritas Rigging Test (Level.1)Certification, KSA

4. Saudi Aramco Certified RIGGER in (2018)

5. Test Rigging Test (Level.1)Certification, KSA

6. Rigging Safety Training

7. Saudi Driving License

COMPUTER-SKILLS

MS- Excel (macro, charting, advance formulas etc.)

MS-World-Power Point (2003&2007 Version)

PERSONAL AIMS &PROFILE

Gain communication skills in various locations worldwide

Familiar with all lifting tools, equipment’s, and lifting procedure.

Knowledge about all Cranes used in petrochemicals Plants during shutdowns or constructions. Well Experienced in Shutdown activities and constructions of petrochemical plants as well as power plants.

Preparations prior shutdown and execution at site.

Lifting Plan Preparations as per client procedure or company procedure.

Following all safety procedures in plants and familiar with MAA’DEN SABIC/ARAMCO Procedure.

Well working during shutdown at Exchangers, Reactors, Column, Fin Fans, valves, etc.,

Full working Knowledge on Bundle pulling, like manual pulling, or by Bundle Puller.

Manage all problems effectively and in a timely manner.

Supervision and delegation of staff whilst developing a team culture.

Maintain high quality standards of workmanship.

Tools box meeting, Material arrangement, Man power distribution & Equipment’s arrangement.

Selection of Crane for each lift with proper Safety Factor.

Study the locations before lifting & prepare lifting study/ method statement, plan and lifting details in standard format.

Explaining the risk in working area and in the work.

Carry out inspection of all lifting tools, &color coding & 3rd party certificate is valid.

Erection of heavy equipment’s such as all type of structures, pipes, valves, air tank, skids and vessels.

Assembling & De-assembling Crawler Cranes up to 15000 tons & Luffer Boom assembling & De-assembling in Truck Mounted and Mobile Cranes up to 1200 tons.

Lifting hazard identification and control.

Top End lifts and Tandem lifts in all types of structures and vessels.

Ensure competent persons for lifting &slinging activities.

Daily inspection of Crane and lifting equipment’s, and preparing checklists.

Provide safety advice and guidance to line Management.

EXPERIENCE (13+YEARS)

01.

POSITION: RIGGING INCHARGE

Company: Expertise (Ma’aden Phosphate Company. MWSPC)

Years: OCT-2018, To. PRESENT

Project: Maaden (Maintenance) Turaif

02.

POSITION: RIGGING INCHARGE

Company: Expertise Ma’aden Phosphate Company (MPC)

Years: 2020

Project: Maaden (Maintenance) Ras Al Khair

03.

POSITION: RIGGING INCHARGE

Company: Expertise Ma’aden Aluminium Company (MAC)

Years: 2020

Project: Maaden (Maintenance) Ras Al Khair

04.

POSITION: RIGGING INCHARGE

Company: Expertise

Years: 2018

Project: SADAF, SAFCO,TASNEE, IBN SENA, Maintenance, Annual (shut down)

05.

POSITION: RIGGER 1 (SUPERVISOR)

Company: ICOM

Years: 2017

Project: Yanbu Subic Gas Plant

06.

POSITION: RIGGER 1 (SUPERVISOR)

Company: ICOM

Years: 2018

Project: NGL Uthmania (Uthmaniya/Udeliya) Saudi Aramco

07.

Position: RIGGER 1 (SUPERVISOR)

Company: ICOM

Years: 2017.2018

Project: Berry gas Plant(BGP)

08.

POSITION: RIGGER 1 (SUPERVISOR)

Company: ICOM

Years: 2018

Project: Jubal Subic Gas Plant

09.

POSITION: RIGGER 1 (SUPERVISOR)

Company: Anabeeb

Years: 2017

Project: Yansab, Samref.Sadaf.Tasnee.Ibn Zhar Annual (shut down)

10.

POSITION: RIGGER 1 (SUPERVISOR)

Company: E Tec (Q. MAKS)

Years: 2017

Project: SIPCHEM PLANT (IMC Efficiency Enhancement Project)

11.

POSITION: RIGGER 1 (SUPERVISOR)

Company: AYTB

Years: 2017

Project: Safco Sabic Plant

12.

POSITION: RIGGER 1 (SUPERVISOR)

Company: H.Q.C

Years: 2016.2017

Project: Turaif MA, Aden Waad Al Shamal plant

13.

POSITION: RIGGER 1 (SUPERVISOR)

Company: T.R.C.

Years: 2015

Project: Kemya project

14.

POSITION: RIGGER 1 (SUPERVISOR)

Company: Saudi with con

Years: 2014

Project: J.P.P. project

15.

POSITION: RIGGER 1 (SUPERVISOR)

Company: Anabeeb

Years: 2014

Project: Sadaf.Unated.Tasnee.Safco.Ibn Zhar plant (Annual shut down

16.

Position: RIGGER 1 (SUPERVISOR)

Company: Olayan Descon in Manifa Project

Years: 2012, 2013

Project: Manifa C.H.P.Project

17.

POSITION: RIGGER 1 (SUPERVISOR)

Company: Olayan Descon in Al Razi Saudi Methanol Company

Years: 2009.To 2011

Project: Al- Razi plant, .Sadaf.Hadeed.safco.Ibn Zhar.Annul (shut down)

Experience details

Leading the complete rigging Team, including Rigging supervisors, and

Foremen.

Plan, organize and see through Heavy/Critical Lifts.

Observe and control potential controllable hazards relating the Rigging

Activity.

Instructing the Team into performing better quality job.

Strictly implement safety standards for a safer job environment.

Make related Job Safety Analysis and have it approved.

Make and implement Approved Rigging/Lifting Plan for all Rigging Activities

On site.

Control complete communication with the crane operator.

Help/instruct the rigging team to select proper Rigging Tackles.

Pre-& Post inspection of rigging tools used in a lift.

Observe and control Rigger behavior for a better professional Environment.

Create and assign job descriptions to all levels working under me.

Roles and Responsibilities

Ensure the compliance of crane lifting Standard Operating Procedure.

Ensure safe rigging works

Conduct site visit and survey.

Coordinate with Maintenance for any lifting job.

Supervise the inspection of rigging tools periodically.

Inspection of lifting Area before the crane assembly.

Inspecting proper ground compaction in the lifting area.

Proper crane assembly

Submission of prepared lifting plans to the respective clients for approval.

Inspecting periodic checklist prepared by crane operator.

Maintaining rigging materials check list.

Lifting will be done basis of perfectness/according to standard not on the assumption.

Supervision and Execution of Works.

Make Daily Accomplishment Report to be submitted on a daily basis

Prepare rigging plans prior to execute lifting of heavy equipment and submit to clients for approval.

Arrange site location for crane positioning as per approved rigging plan

Inspect all rigging accessories to be used as per safety precautionary measured before lifting is to be done.

Make pre lifting orientation and safety precautionary measured so as to avoid

Unnecessary misunderstanding among the rigging crew’s.

As supervisor I personally handle the execution of heavy lifting works And o rdinary lift less than 10 tons i assign qualified rigger’s to do the job.

Supervision provided I have to insure everything is on safe manner before lifting is to be done.

Prepare all lifting accessories to be used on site in at the same time conduct

Inspection.

Key Accomplishments.

1.Attending toolbox talk in every day morning.

2.Executed daily operations of coordinating day to day maintenance of plant, received job orders to determine work priorities.

3.Ensuring required mechanical isolations are carried out according to the PTW, JSA and LOTO prior to commencing work.

4.Investigated mechanical failures and unexpected maintenance problems.

Safety & Special Assignments

1.Oversaw Health & Safety in work processes by supporting company safety program requirements. Inspecting the physical condition of maintenance department equipment’s as per OSHA, SHEM’s standard.

2.Attended permit to work training and confined space attendant training at SADAF

3.Attended in LT&T(lock out tag out) training at SADAF, KSA

4.Strictly adhere the safety policy & safety regulation in working places, attending various safety programs and every monthly safety communication meeting as per MAADEN policy.

5.Following the QSAFE observation as per OSHA (Occupational Safety & Health of Administration of America) standard safety policy.

6.Major turnaround in chemical company(Chevron Philips company,USA)

7.Good knowledge and experience in Balancing machine operation.

8.Attended Safety and Fire Fighting training courses.

9.Having basic knowledge of computers in MS Office, MS Project & ERP systems.

10.Having knowledge in SAP. Material stock verification and checking the maintenance work notifications etc.

11.Languages Known

12.English

13.Arabic

14.Urdu

15.Punjabi

DECLARATION:

I hereby declare that the above mentioned information is correct up to my knowledge and I bear the responsibilities for the correctness of the above mentioned particulars.

DATE Zaheer Abbass Gondal

Contact this candidate