Shoukat Hussain

Team Lead Power Transformer Design and Tendering at ATEF

Group of Companies, Baku Azerbaijan.

Cell: +994********* & +923********* whatsApp

E-mail: adpri9@r.postjobfree.com

Objective

An electrical power & distribution transformers design engineer capable of working in a cutting edge technology environment, that allows utilizing skills, creativity & experience in moving the company ahead with the growth opportunities in a motivating environment, good design optimizer, communicator, presenter, negotiator. A team leader and a good team worker, able to think logically and analytically in both industrial and academic environments.

Education

Registered member at Saudi Council of Engineers

Membership ID is 410080.

B.Sc. Electrical (Power) Engineering (2008-2012)

University of Engineering & Technology (UET), LAHORE,PK CGPA 3.027 / 4.00

F.Sc. Pre-Engineering (2005-2007)

Forman Christian College Lahore Pakistan

Grade: A

Mathematics, Physics, Chemistry.

Final Year Project:

Auto Transformer Design with microcontroller based OLTC

Internee at NTDC (national transmission and dispatch company) Internee at NTDC-WAPDA (water and power development authority of Pakistan), learnt about load factor and growth factor estimation & up gradation of EHV lines and protection system of transmission lines.

Work Experience (2012 till today-2021)

ATEF Group of Companies, Baku, Azerbaijan

Feb2021-Present: Team Lead Power Transformer Design and Tendering. Electrical Industries Company (EIC), Kingdom of Saudi Arabia 2018 to Jan 2021: Power transformer design engineer Note: Both PEL and EIC operate under technology of CG (ganz+ pauwels) Pak Elektron Limited (PEL), Lahore Pakistan

2012 to 2018: Sr.Engr. Power & Distribution Transformers Design Design Experience:

Working experience with below EPC International Contractors Familiar with working style of these above mentioned EPC contractors from tendering stage to final project execution stage. Design Activities

345kV,230kV, 132kV,72.5,36kV,12kV Power systems:

Design of power transformers up to above mentioned voltage classes.

Major Designs and/or Prototypes Executed .

1. 250MVA 330/230/10.5kV YNa0d11,auto point regulated CFVV. 2. 250MVA 330/115/10.5kV YNa0d11,auto point regulated CFVV. 3. 200MVA 230/121/10.5kV YNa0d11,auto point regulated CFVV 4. 150MVA 121/10.5kV OFAF cooling with unit coolers 5. 95MVA 121/10.5kV OFAF cooling with unit coolers 6. 125MVA, 230/115/10.5kV YNa0d11,auto point regulated CFVV 7. 80MVA 115/10.5/10.5kV YNd11d11 transformer

8. 80MVA 115/38.5/10.5kV YNyn0d11 with OLTC+OCTC

9. 63MVA 115/38.5/10.5kV YNyn0d11 with OLTC+OCTC

10. 40MVA 115/38.5/10.5kV YNyn0d11 with OLTC+OCTC

11. 31.5/40MVA 132/11.5kV Dyn11, with MR VV type OLTC 12. 20/26MVA 132/11.5kV Dyn11, with MR VV type OLTC 13. 10/ 13MVA 132kV/11.5kV Dyn11 with MR VV type OLTC 14. 31.5/40MVA 132 /12/12kV YNyn0 (d11) with vacuum type coarse fine OLTC for KE (K-Electric Karachi Pakistan) 15. 10/13MVA 66/11.5kV Dyn11, with MR reversing VV type OLTC 16. 20MVA 33/13.8kV Dyn11 with OLTC for SEC/NG ( Saudi National Grid)

17. 15MVA 40 /12.7-6.35kV YNyn0 center tapped LV transformers for STATCOM operations for SEC.

18. 10MVA 34.5kV/4.16kV Dyn1 with OLTC with 33 steps for Saudi Aramco

19. 10/12.5MVA 34.5kV/4.16kV Dyn1 for Saudi Aramco 20. 5MVA 12 pulse rectifier transformers.Dd0yn11, Dd0yn5. 21. 20-25MVA 34.5/13.8kV for Yasref refinery.

Designed slim transformers off different ratings with silicon oil and Nomex

Designed auto transformers with reversing OLTC and series reactors

Designed low voltage dry type transformers.

Designed Earthing (grounding) ZN Transformers.

Designed 4kA, 3KA,2.5kA,1kA, 6.6 to 11kV current limiting reactors

Prototype approval of JEPCO ( Jordan’s utility)

Designed different transformers ratings for type testing carried out at KEMA labs in May 2016. Transformers withstood 5s symmetrical shot also along with routine short circuit. The transformers were with organic ester fluid from MIDEL.

Also designed 33kV zigzag connection Yzn11 transformers for JEPCO as well.

Product Development activities.

Developed excel program to design EARTHING transformers.

Leading the engineering department.

Was responsible for the verification of technical submittal to the contractors / customers like NMR 601, NMR602 drawings that include GA /outline drawings, cable boxes, control cabinet & foundation drawings and other accessories drawings etc.

Responsible for the technical submittal and costing of the equipment for tendering / bidding purposes.

Responsible for technical bid evaluation “TBE” sheet clarifications / correspondences with contractors / customers.

Responsible for data filling / verification of data filled in technical data sheets of the transformers and defining deviation schedules etc.

Responsible for the verification of purchase orders (POs) against material procurement.

Responsible for the issuance of Bill of materials (BOMs) to concerned department for job execution.

Was member of R&D Team at PEL for continuous improvement and productivity enhancement.

Responsible for performing lightning impulse / surge & short circuit analysis using software like VIT/VLN,PULSE, Magnaxi and Anderson Method etc.

Member of CFT (cross functional team) represented design department for 40MVA,13MVA prototypes production for type testing.

Designed power transformers with coarse fine, reversing, and linear on-load tap changers of different MAKE like MR, ABB,Huaming.

Preparation of complete electrical design, material cost, technical data sheets & communication to concerned for outsourcing material

Material saving of approximately 1.0 million US dollars in year 2016&2017 through innovative optimization of transformer designs.

Prepared technical schedules for KURDISTAN (Iraq’s utility) for the preparation of budgetary price for the tender also proposed the specifications for 80MVA transformer.

Preparation of tender technical documents and complete follow up to local and export inquiries

Effective optimized costing for capitalized losses for different tenders

Development & successful type testing approval of first Aluminum winding transformers in Pakistan.

Complete understanding of scope of work of transformers from initial stage to final stage.

Re-optimization of design calculations after measured results.

Complete preparation & successful submission of international Tenders in KSA, UAE, Bahrain, Iraq, Kenya, Belgium, Mauritius, Kenya, Swaziland, and Afghanistan

Prequalification of KAHRAMAA QATAR, Oman, and BAPCO Bahrain utilities oil immersed transformers.

Perform optimized design calculations (inquiries) for marketing department and assist marketing personnel to secure the order.

Part of internal audit team representing technical authority for ISO9001, ISO17025 of test laboratory & implementing OH&S system

Testing / Inspection Knowledge

Good knowledge of inspection / testing of transformers.

Verification of transformers routine testing test reports, type test and special test reports and technical details

Experience of at site fault locating and rectification of fault regarding transformer.

Developed and excel sheet to predict the behavior of temperature rise test.

Continuously dealt the customers for inspections, after sale services and for any technical support required.

To trace out the root causes of the failures of transformers in in-house testing or during field operation failure.

Earned good experience during customer inspection, pre qualification and customer services.

Rectified different problems at site relevant to fuse rating of transformers and transformer protection relays.

Awareness of equipment used during inspections / testing including TTR hand crank and TTR three phase meters Raytech, resistance meters, power millimeters, Power Analyzers, High voltage test sets, Insulation meter, insulation analyzer, BDV testers etc.

Good understanding / working principal of Impulse generator voltage test set up to 1000kV

Implemented ISO17025-2005 in transformer test laboratory.

SOFTWARE

iTracs, DesPT, DesDT, FoxPro, Magnaxi, PULSE, Anderson Method, ETAP, PSCAD, Auto CAD, Pro-E, PWS MATLAB, FX Trainer (for PLC) MS Office (Excel, word, power point)…

Specifications and Standards.

IEC 60076-1

IEC 60076-2

IEC 60076-3

IEC 60076-4

IEC 60076-5

IEC 60076-6

IEC 60076-7

IEC 60076-10

IEC 60076—11

IEC 60296

IEC 60422, …

IEEE / ANSI C57.12.00

IEEE / ANSI C57.12.10

IEEE / ANSI C57.12.90

And other specifications of utilities like SEC Saudi Arabia Saudi 53-SDMS-01, 53-TMSS-01, Saudi

ARAMCO 14 SAMSS-531, WAPDA Pakistan P146 &

DDS 84, BAPCO Bahrain, KPLC Kenya, DEWA

(Dubai), DABs Afghanistan, KOC (Kuwait), JEPCO

(Jordan) etc.

CORE PROFESSIONAL STRENGHTS

Goal Oriented Strategies

Trained Junior staff

Company Rules and Regulations

Unique Problem Solving Ability & Building Key Strategic Relationships

Good communication ability both verbal and in writing.

Ability to think technically and operationally which ensures identification of problems resolves them timely and applies my skills to fulfill objective of given tasks.

Fluent in English, Strong inter personal skills

Honest, Punctual & Committed to work hard

References:

Mr.Endre Mathe (worked as Transformer Design manager at Ganz Hungary Email: adpri9@r.postjobfree.com

Mr.Allan Van Hoecke (worked as Transformer Design and R&D manager at Pauwels Belgium Email: adpri9@r.postjobfree.com

Contact this candidate