Millwright
Resume:
Joshua Stanley
Millwright Journeyman
Oakdale, LA 71463
adpnyh@r.postjobfree.com
To obtain a position with your company utilizing my team player skills, qualifications and my experience in my craft.
Willing to relocate: Anywhere
Authorized to work in the US for any employer
Work Experience
Journeyman Millwright
NCW - Muncie, IN
November 2021 to November 2021
Seal & bearing replacement, along with pump and motor replacement & alignment once replaced using a laser (easy laser), valve removal and installation of new valves, demo and fabrication of new tank used to melt down and recycle LEAD, install U-Tubes, Steel plate 1 1/2" thick along with new I Beams. Used torch to cut out old I beams and existing steel plate. Measurements taken and laid out on new plate and beams then fabricated with torch/Metabo a precision fit. I then used fork lift to bring plates and beams around to the carry deck. I gathered up all the rigging i would need to fly up plates and beams. (Chain falls, chains, nylon chokers, endless chokers along with 3/4 & 7/8's shackles) Flew beams in first then I tack welded them down once in place i then rigged up to the new steel plates and flew into place once set I then tacked plates down with a mig welder. Loaded up all the removed sections of plates and beams onto the forklift and brought out set on pallet to be disposed of in proper bins Millwright
Construction Recruiters America Staffing - Hampstead, MD October 2021 to November 2021
Installing conveyors for random house
Journeyman Millwright
Turner Industries - Sulphur, LA
August 2021 to October 2021
Short shut down job, removed old seals and bearings installed new bearings and seals. Did a handful of alignments using either Laser or dial indicators. Installed new gear boxes and installed a new conveyor line going to furnace.
Journeyman Millwright
TIC - The Industrial Company - Cameron, LA
November 2020 to August 2021
We are building another LNG facility in cameron Louisiana. This one is right in front of the gulf of Mexico. We work in a section called Power Island. There are 3 gas turbines I have assembled with a crew. Millwright
Lexicon, Inc. - Frostproof, FL
January 2020 to November 2020
Alignments of stands in cooling bed (which is where the finished product aka reber goes theou rakes and then down to the stands that shake and bundle up the bars then send down to shipping area). Used a box level to align the stands. (Box level has a 98 level in it) Also done alignments of the ecs the stands the frames sit on then set and align the pan that sets on top of the frame and stands. (The ecs is the start of the mill where a overhead crane picks up scrap metals then sends them down to the furnace). Also used cutting devices like torch grinder metabolic to fabricate parts and equipment that would not fit. Millwright
LEXICON - Sedalia, MO
August 2019 to January 2020
New construction of Nucor Steel . I am the lead man on my crew of 9. I've Used box levels to align vertical stands in the cooling bed,alignment of frames and stands on the ECU using 98s and piano wires to align the bolt holes. Fabricated piano wire stands using a cutting torch metabolic grinders and various hand tools. I've done a lot of rigging on our crew. Installed equipment. Assemble new equipment and machinery. Using over head Cranes to lift loads. Assembled three over head Cranes. Unload trucks using forklift.
Millwright journey man
ICS INC - Wahpeton, ND
June 2019 to August 2019
Maintenance work on a sugar beet mill. Replaced knife gate valves, demolition of old rusted sections of shouts then fabricated new sections then tack welds were placed then seal welded them. Rebuilding the number four out of five pulp press. Replaced the structural steel that supports the screens that recover additional sugar from pulp. A small group of us which consisted of 4 journeymen were given the task of rebuilding the main gearbox on the diffuser, which extracts sugar out of the beets. Then the 4 of us installed new dischargers for the white centrifugals. Went through all of the equipment and checks bearings and seals. Replaced of the upper half of the steel shell on the number three evaporator, fabricated a plate out of new stainless steel for the upper inside portion of the number three evaporator, fabricate a plate for the upper inside portion of the number three evaporator also these tubes are an inch and a quarter in diameter and nine to 10 feet long and there are a ton of these tubes. Millwright Journeyman and Foreman
CB & I/ McDermott - Hackberry, LA
June 2016 to May 2019
New construction of Liquid Natural Gas facility. Operated JLG/Scissor lifts(up to 185') set power houses and pump alignments pieced together bolted and torqued out all three WHRU (Waste Heat Recovery Unit and the three Exhaust stacks along side each turbine in all three trains used a cutting torch and grinders t fabricate and pieces of equipment so that they'd fit properly and set shims leveled out bases categorized mapped out and store various components and material bolted equipment together precision fitting bend tubing/install tubing pieced together filter houses on all three turbine table tops Aligns machines and equip
using hoists jacks hand tools squares rules micrometers and plumb bobs.Assembles and installs equipme such as shafting conveyors and tram rails using cranes hand tools and power tools.Reads and interprets blueprints layout plans vendor installation and operation manuals and other schematic drawings to determ
work procedures.Tore out heaters using cutting torches and various power tools in new construction of Liquid Natural Gas facility. Operated JLG/Scissor lifts(up to 185') set power houses and pump alignments pieced together bolted and torqued out all three WHRU (Waste Heat Recovery Unit and the three Exhaust stacks along side each turbine in all three trains used a cutting torch and grinders t fabricate and pieces of equipment so that they'd fit properly and set shims leveled out bases categorized mapped out and store various components and material bolted equipment together precision fitting bend tubing/install tubing pieced together filter houses on all three turbine table tops Aligns machines and equip
using hoists jacks hand tools squares rules micrometers and plumb bobs.Assembles and installs equip me such as shafting conveyors and tram rails using cranes hand tools and power tools.Reads and interprets blueprints layout plans vendor installation and operation manuals and other schematic drawings to deter work procedures.
talked new heaters. Pump motor and s
alignments. Installed roller conveyor lines and motorized belt conveyor lines Millwright Journeyman
Turner Industries - Sulphur, LA
July 2014 to June 2016
Millwright on turnaround and shut downs Weld, repair, and fabricate equipment or machinery.Fabricate parts or components.Operate welding equipment.Repair worn, damaged, or defective mechanical parts. Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
Fabricate and dismantle parts, equipment, and machines using a cutting torch or other cutting equipment.Fabricate parts or components.
Dismantle machinery and equipment for shipment to installation site, usually performing installation and maintenance work as part of team.Dismantle heavy equipment or machinery. Troubleshoot equipment, electrical components, hydraulics, or other mechanical systems.Troubleshoot equipment or systems operation problems.
Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.Test mechanical equipment to ensure proper functioning. Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.Fabricate parts or components.
Operate engine lathe to grind, file, and turn machine parts to dimensional specifications.Grind parts to required dimensions.Install robot and modify its program, using teach pendant.Install programs onto computer or computer-controlled equipment
Millwright Journeyman
NAES Corporation - Sulphur, LA
June 2015 to August 2015
Assisted journeymen installation of piping valves used hand tools and power tools removing of old equip and installing new fire watches when asked to assisted in alignments cut with cutting torch set compressor
removed old gaskets installed new gaskets
Millwright Journeyman
Naes
November 2013 to May 2014
Millwright Journeyman worked in fab shop beveled pipe preparing piping for welders bolted up flanges torq
bolts out installed gaskets hydro testing flanges/piping/valves removed old piping vastnesses bolts rimming
holes so bolts would fit used chain falls and come alongs to move piping into position. Maintenance Millwright
Boise Cascade - Oakdale, LA
February 2011 to March 2013
Ran forklift Tasks
Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.Adjust the tension of nuts or bolts.Position equipment using hand tools, power tools, or heavy equipment. Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs.Align equipment or machinery.
Assemble and install equipment, using hand tools and power tools.Assemble mechanical components or machine parts.
Lay out mounting holes, using measuring instruments, and drill holes with power drill.Drill holes in parts, equipment, or materials.Lay out work according to specifications. Signal crane operator to lower basic assembly units to bedplate, and align unit to centerline.Align equipment or machinery.Communicate with coworkers to coordinate installations or repairs. Replace defective parts of machine or adjust clearances and alignment of moving parts.Adjust equipment to ensure optimal performance.Replace worn, damaged, or defective mechanical parts. Level bedplate and establish centerline, using straightedge, levels, and transit.Level machines or equipment.
Dismantle machines, using hammers, wrenches, crowbars, and other hand tools.Dismantle heavy equipment or machinery.
Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.Assemble mechanical components or machine parts. Move machinery and equipment, using hoists, dollies, rollers, and trucks.Move materials, equipment, or supplies.Operate cranes, hoists, or other moving or lifting equipment. Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.Bolt objects into place.Assemble mechanical components or machine parts.Operate welding equipment.
Conduct preventative maintenance and repair, and lubricate machines and equipment.Lubricate equipment to allow proper functioning.Maintain work equipment or machinery.Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings, to determine work procedures.Position equipment using hand tools, power tools, or heavy equipment.Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.Bolt objects into place. Weld, repair, and fabricate equipment or machinery.Fabricate parts or components.Operate welding equipment.Repair worn, damaged, or defective mechanical parts. Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
Fabricate and dismantle parts, equipment, and machines using a cutting torch or other cutting equipment.Fabricate parts or components.
Dismantle machinery and equipment for shipment to installation site, usually performing installation and maintenance work as part of team.Dismantle heavy equipment or machinery. Troubleshoot equipment, electrical components, hydraulics, or other mechanical systems.Troubleshoot equipment or systems operation problems.
Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.Test mechanical equipment to ensure proper functioning. Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.Fabricate parts or components.
Operate engine lathe to grind, file, and turn machine parts to dimensional specifications.Grind parts to required dimensions.Install robot and modify its program, using teach pendant.Install programs onto computer or computer-controlled equipment
Millwright Journeyman
Shaw Group - Boyce, LA
July 2008 to November 2008
Install, assemble, dismantle, maintain, troubleshoot, and repair machinery to specifications. I'd use precision tools and processes to ensure that the machinery is installed or repaired and working correctly. Troubleshooting equipment to determine the cause of damage or malfunction is critical to the proper repair of mechanical equipment and is an essential capability for this position. I will work with industrial machinery and equipment including but not limited to: pumps, compressors, conveyor belts, motors, small engines, rotating equipment and small generators. Plan, inspect, verify and document scope of work.
Fit bearings, align gears and wheels, attach motors and connect belts according to manufacturer’s blueprints and drawings.
Dismantle machines using hammers, wrenches, crowbars and other hand tools Operate engine lathes, grinders, and files.
Fabricate and install parts, equipment and machinery by measuring, cutting, drilling and/or welding. Turns machine parts to dimensional specifications. Unload, inspect, move and set equipment into position using cranes, hoists, dollies, rollers and trucks. I'd use rigging and hoisting devices such as chokers, chain falls and come along to move equipment / materials into place
Millwright Journeyman
Powertec - Orange, TX
May 2007 to July 2008
I've worked with industry-specific and high complex precision machines including, ball mills, ID fans, lube coil skids, turbines, conveyors, generators,hydraulic systems, pumps, gears, bearings & compressors. Before each day begins I plan, inspect,verify and document scope of my work. I use precision leveling and alignment tools in order to measure angles, material thickness and small distances with calipers, squares, micrometers, optical instruments and other tools. I also fit bearings,align gears and wheels, attach motors and connect belts according to manufacturer’s blueprints and drawings.
I dismantle machines using hammers, wrenches, crowbars and other hand tools and power tools. I assemble and install equipment such as shafting, conveyors and tram rails. I will assemble machines and bolts, welds, rivets and fasten machinery to foundations and or other structures using hand tools and power tools.
When necessary i will fabricate and installs parts, equipment, and machinery by measuring, cutting, drilling and/or welding.
Turn machine parts to dimensional specifications.
I would unload, inspect,move and set equipment into position using cranes, hoists, dollies, rollers,and trucks. I use rigging and hoisting devices such as chokers, chain falls and come alongs to move equipment/ materials into place.
Millwright Journeyman
WABI SABI - El Dorado, AR
April 2006 to December 2006
Removed heater installed new heater, aligned new motors and pumps, cleaned bases for motor and pump, leveled out base, set shims, used laser to preform alignment. Read and interpret blueprints, layout plans, vendor installation and operation manuals, and other schematic drawings to determine work procedures.Dismantle machines using hammers, wrenches, crowbars and other hand tools.Moves machinery and equipment using hoists, dollies, rollers and trucks.Assembled and installs equipment, such as shafting, conveyors and tram rails, using cranes, hand tools and power tools. Made foundations for machines using hand tools and building materials, such as wood, cement and steel.Aligns machines and equipment using hoists, jacks, hand tools, squares, rules, micrometers and plumb bobs. I ran an optical laser and made alignments. Lay out and assemble machines and bolts, welds, rivets or otherwise fastens them to foundation or other structures using hand tools and power tools. Operate engine lathe to grind, file and turn machine parts to dimensional specifications. Use transit and level for equipment setting.Load, transports and unloads materials, tools, equipment and supplies.Perform lubricating maintenance, cleaning activities, or repair of tools, machines, and equipment. Perform other duties as required.
Education
High school or equivalent in GED
Camp Robinson - Little Rock, AR
June 2009 to August 2009
Skills
• Maintenance (10+ years)
• Mechanic (7 years)
• Pipe stress (5 years)
• Millwright (10+ years)
• Fabrication (10+ years)
• Microsoft Word (10+ years)
• Blueprint Reading (6 years)
• ISO (5 years)
• Hand Tools (10+ years)
• Power Tools (10+ years)
• Hydraulics (5 years)
• Electrical (2 years)
• Conveyors (4 years)
• Diesel
• Welding
• Mechanical Knowledge
• Industrial Maintenance
• Micrometer
• Facilities Maintenance
• Calipers
• Industrial Equipment Experience
• Precision Measuring Instruments
• Micrometer
• Industrial Equipment Experience
• Facilities Maintenance
• Calipers
• CNC Lathe
• CNC
• Manufacturing
• Plasma Cutting
• Alignment
• Equipment Repair
• Plasma Cutting
• Programmable Logic Controllers
• Microsoft Office (10+ years)
• Boiler (5 years)
• Leadership Experience (10+ years)
• Leadership Training (5 years)
• Alignment (10+ years)
• Forklift Operator (7 years)
• Aerial lift (6 years)
• Exchangers (5 years)
• Troubleshooting (10+ years)
• Shift Management (8 years)
• Staffing (10+ years)
• Bore Mics (4 years)
• Turbines (5 years)
• Turnarounds (7 years)
• Inventory Control (10+ years)
• Precision Measuring Instrument (10+ years)
• Precision Measuring Tools (10+ years)
• Precision Measuring Devices (10+ years)
• Precision Measuring Instruments (10+ years)
• Precision Measuring Instruments (10+ years)
• Basic Math (10+ years)
• Construction Experience (10+ years)
• Forklift (10+ years)
• Heavy Lifting (10+ years)
• Inventory Control (10+ years)
• Load & Unload (10+ years)
• Microsoft Outlook (10+ years)
• Microsoft Powerpoint (10+ years)
• Microsoft Office (10+ years)
• Mechanical Knowledge (10+ years)
• Micrometer (10+ years)
• Outside micrometers (10+ years)
• Dial indicator (10+ years)
• Indicator (10+ years)
• Project Planning (10+ years)
• Percision level (10+ years)
• Troubleshooting (10+ years)
• Time Management (10+ years)
• Tube Bending (3 years)
• Tube Feeding (3 years)
• Team Leader (10+ years)
• Turnarounds (6 years)
• Welding (2 years)
• Gearboxes (5 years)
• Compressors (4 years)
• Calipers (10+ years)
• Manufacturing
• Pneumatics (10+ years)
• Oil & Gas Experience
• Microsoft Excel
• Computer Networking
• Conveyor Installation
• Coordinate Measuring Machine
• Geometry
• Industrial Equipment
• Leadership
• Computer literacy
• Quality Assurance
• Stata (3 years)
• Microsoft Project
• Materials management
• Customer service
• NEC
• SAP
• Analysis skills
• Automotive repair
• OSHA
• Supervising experience
• Machining
• Heavy equipment operation
• MIG welding
• Quality inspection
• Forklift (10+ years)
• Conveyor installation (5 years)
Certifications and Licenses
Certified Forklift Operator
February 2012 to Present
Aerial Boom Lift
November 2017 to Present
Up to 185'
OSHA 10
June 2007 to September 2029
TWIC Card
Assessments
Mechanical Knowledge — Highly Proficient
May 2019
Measures a candidate's ability to understand and apply mechanical concepts and processes. Full results: Highly Proficient
Workplace Safety — Highly Proficient
May 2019
Following best practices to avoid accidents and injuries. Full results: Highly Proficient
Basic Maintenance and Repair — Proficient
May 2020
Performing basic repairs and maintenance for apartment complexes, office buildings, and other facilities
Full results: Proficient
HVAC Technician — Proficient
May 2020
Designing, implementing, and troubleshooting commercial HVAC systems Full results: Proficient
Indeed Assessments provides skills tests that are not indicative of a license or certification, or continued development in any professional field.
Additional Information
Also going to take my nccer asap while Currently registered with online classes to obtain my Degree in Process Technology and Instumentation.
OSHA 10
Contact this candidate