QA/QC construction supervisor
Resume:
CAREER GOAL
Seeking the position in your organization, where I can deliver my attentive skills to ensure the Quality work. I have experience in a variety of practical roles in Quality Control which is supported by a strong work ethic and willingness to learn new skills. I’m experienced in supervising with a really good attention to detail. I am therefore open to employment opportunities where my skills and experience could be considered useful and transferable. I feel I’ll be a great asset to your team and company.
PERSONAL DETAILS
Name: Leon
Surname: Lambrechts
Date of birth: 10 August 1982
Identity number: 820-***-**** 084
Passport number: A05485289
Nationality: South African
Gender: Male
Marital status: Married
Driver’s license: Yes (code 8)
Language Proficiencies:
Speak
Read
Write
English
Afrikaans (Home)
EDUCATIONAL QUALIFICATIONS
Last school attended: Pietersburg High School
Highest standard passed: Grade 12 / Matric
Year completed: 2000
Subjects: Afrikaans, English, Mathematics, Geography, Economy and Accounting
TERTIARY QUALIFICATIONS
Name of institution: Potchefstroom University
Course: 1st Year in Sport Management
Year completed: 2001
Study History
Date: 2001
Course: 1st Year student in sport Management
(Potchefstroom University)
Subjects: Computer studies, Typing, Anatomy,
Physiology, Sociology, Management
Further Studies
Date: February 2006 – June 2006
Name of institution: Unisa
Course: General Management Course (6 Months)
Introduction to economics and management environment (101,102)
Language and learning skills
Qualifications:
Course: NACE CIP Level 1 & 2
ISO 12944 Certificate
CSWIP 3.1 Level 2 course
CBT Legal Liability OHSA - Certified 2021
Working at Heights - Certified 2020
Accident & Investigation – Certified 2021
Effective contractor management – Certified 2021
Completed Date for welding: 9 -13th May 2017 written exam. Passed 2 out of 5 subjects.
Must still complete rewrite for CSWIP 3.1 level 2 welding.
EMPLOYMENT HISTORY
Name of company: DPA Engineering (Sasol, Secunda)
Duration: 1st September 2020 to date
Position held: QA/QC 3rd party inspection (Coating and Concrete)
Project: SASOL Cooling Tower 245A
Duties:
Conforming to all acceptance criteria’s via the specification/ method statements to allow blasting and water jetting before shotcrete and coating can be applied.
Recordings of all environmental conditions.
Recordings of blasting surface profile (CSP standards)
Witnessing of shotcrete and coating systems.
Recordings of all DFT’s
Witnessing of Phenolphthalein & adhesion testing.
Conducting soluble salt test’s as required via the specification.
Witnessing of all core test’s conducted.
Signing off on all data packs/ Reports before handover to client.
Inspection of all scooping (Hammer Test) of cooling tower 245A.
Working at heights.
Material used on project: Concrete
Sika MonoTop 610 (Primer) for rebar
Sika MonoTop 412 (Migrating Corrosion Inhibitor)
Sikalastic 152 (Final Top Coat)
Blasting grit – Blastrite B60 & water jetting
Method of application: Shotcrete (Guniting)
Reference: Daniel Ryding
Cell: +27-076-***-****
E-mail: ******@**********.**.**
EMPLOYMENT HISTORY
Name of company: M&S Corrosion Control (Sasol, Natref)
Duration: 1st Aug 2019 – 10 Aug 2020
Position held: QA/QC 3rd party inspection (Coating)
Project: SASOL Maintenance (Natref)
Duties:
Conforming to all acceptance criteria’s via the specification to allow blasting and then coating or lining of all tanks and pipes.
Recordings of all environmental conditions.
Recordings of blasting surface profile
Witnessing of coating or lining systems.
Recordings of all DFT’s
Recordings of all dust and debris.
Conducting soluble salt test’s as required via the specification.
Signing off on all data packs beforehand overt to client.
Inspection of tank roof tops. Working at heights.
Material used on project: STONCOR
Carbozinc 859 (Primer)
Carboguard 880 (Intermediate)
Carbothane 134 (Final Top Coat)
Blasting grit – Ecoblast & Blastrite B60
Method of application: Conventional spray
Airless Spray
Reference: Kobus Oosthuizen
Cell: +27-076-***-****
E-mail: *****@****************.**.**
EMPLOYMENT HISTORY
Name of company: Stefanutti Stocks
Duration: 1st Nov 2019 to 7th Feb 2020
Position held: QA/QC Inspection (Coating)
Project: Natcos (Durban)
Duties:
Conforming to all acceptance criteria’s via the specification to allow blasting and then coating or lining of all tanks and pipes.
Recordings of all environmental conditions.
Recordings of blasting surface profile
Witnessing of coating or lining systems.
Recordings of all DFT’s
Recordings of all dust and debris.
Conducting soluble salt test’s as required via the specification.
Signing off on all data packs beforehand overt to client.
Inspection of tank roof tops. Working at heights.
Material used on project: STONCOR
Carbozinc 859 (Primer)
Carboguard 193 (Intermediate)
Carbothane 134 (Final Top Coat)
Blasting grit – Ecoblast & Blastrite B60
Method of application: Conventional spray
Reference: Johan Kriel (Project Manager)
Cell: +27-076-***-****
EMPLOYMENT HISTORY
Name of company: JVI Services / Mutso Engineering
Duration: 14 May 2018 – 10 Dec 2018
Position held: QA/QC Control
Project: SASOL, Secunda – Fine Ash Dam 6 (W/S in Vanderbijlpark)
Duties:
Conforming to all acceptance criteria’s via the specification to
allow blasting and coating of all pipes.
Recordings of all environmental conditions.
Recordings of blasting surface profile.
Witnessing of coating system application on all flanges and spools.
Recordings of all DFT’s.
Recordings of all dust and debris.
Conducting soluble salt test’s as required via the specification.
Completion of all coating data packs (ISO’s), before hand over and signing off final inspection for release and delivery to site.
Application method of paint by conventional spray.
Coordinating and managing of x1 team of 16 personal for the production line and quality.
Welding experience
Visual inspection of the welding (After) conducted to confirm that weld conforms to the welding specification before coating can continue.
Material used on project: STONCOR
Carbozinc 11 (Primer)
Carbozinc 859 (Primer)
Carboline 193 (Intermediate)
Carbothane 134 (Final Top Coat)
Blasting grit – Ecoblast & Blastrite B60
Method of application: Conventional spray
Reference: Johann Viljoen
Cell: +27-82-855-****
E-mail: ******@***********.**.**
EMPLOYMENT HISTORY
Name of company: Redec
Duration: 12 March – 2 April 2018
Position held: QC Control
Project: SASOL gas line, Vilanculos, Mozambique
Duties:
Conforming to all acceptance criteria’s via the specification to
allow all sites to be coated.
Recordings of all environmental conditions.
Witnessing of x3 coating system application on all welds, flanges and spools.
Recordings of all DFT’s.
Completion of all painting data packs, before hand over.
Application method of paint by brush & roller.
Welding experience
No welding responsibilities. Only coating.
All blasting and 1st coat (Primer) applied in workshop, Vanderbiljpark – Gauteng.
Material used on project: STONCOR
Carbozinc 859 (Primer)
Carboguard 193 (Intermediate)
Carbothane 134 (Top Coat)
Carbomastic 186 (Primer/Intermediate) used on site
Reference: Louis Strom
Cell: +27-82-317-****
E-mail: *****@*****.**.**
Name of company: ATB Riva Calzoni
Duration: 22nd August 2016 – 23 February 2018
Position held: QA/Quality Control Technician
Project: Massingir Dam, Mozambique
DUTIES:
This portfolio carried the following responsibility
Comprehensive Inspector representing ATB Riva Calzoni Contracting on the Massingir Dam water scheme project (Mozambique)
Witnessing and acceptance of Non Destructive Testing and Destructive testing
Inspection of welds and joints and internal linings via the QCP
Witnessing welding via the WPS
Assisting with TOFD
Dye Pen Testing and MPI
Fit up and alignment before welding commences
Coordinating of x3 technicians.
Quality control of all documentation and data packs.
Signing off before handing over to client.
Experience
Coating systems and their application methods.
Destructive and Non Destructive Coating tests and test procedures.
Good understanding and utilization of Coating thickness equipment and its limitations
Inspection reporting.
Familiar with ISO, SSPC, NACE, ASTM, Codes and Standards.
Basic understanding of cathodic protection.
Co-ordination, supervision and planning.
Supervision of beveling preparation before fit up.
Supervision of welding joints preparation.
Supervision of piping fit up before welding according to the approved drawing.
Supervision of the WPS correct parameters during the welding activities.
Visual inspections to mark out defects.
Monitor repair process.
Wall thickness measurements on parent material.
Monitor consumables storage and usage.
Skilled and understanding, but no certification in:
• Dye Pen testing • MPI • TOFD
Material used on project: Jotun – Jotamastic 87 & 90
Jotun – Hard Top Flexi
Airless Spray
Reference: Luca Donadei
Cell: +39-338-***-****
E-mail: ****.*******@*****.***
Name of company: Sonartech
Duration: February 2014 – 22nd August 2016
Position held: Quality Control Technician
Project: Olifants River Water Resource
Development Phase 2
DUTIES:
Quality control of the whole project for external, internal work regarding coating and lining of all pipes. Flanges, joints, Air valves and crotch plates.
Destructive testing and non-destructive testing.
Monthly, weekly and daily planning with production to achieve progress targets.
Managing of X3 groups with 8 people in a group for different sections with x3 super visors.
All coating and lining documentation and signing of reports before handing over to the client.
Material used on project: Sigma 523 & Sigma 588
Poly clad 777
Denso Primer
Bitumen Wrap
Reference: Mervyn Shaw
Cell: 072-***-****
Name of company: Land Rover Vereeniging (Gauteng)
Duration: 2012 January – 2014 January
Position held: Manager
DUTIES:
Management of the whole used dept.
Buying stock and trading between dealerships.
Management of x3 sales executives and their performance and reaching of targets and x2 cleaners.
Manage the website.
Targets and profit.
All used administrative and files to be signed of and approved before hand over.
All negotiations with clients, before any deal is accepted.
Reference: Paul Melhiush
Cell: (016-***-****
Name of company: Leon’s Used Vehicles [Self-employed] (Gauteng)
Duration: 2008 – 2011 December
Position held: Owner
DUTIES:
Which was a whole sale business.
As the sole owner I had to Manage the buying and selling of vehicles and all negotiations.
All administrative work.
Confirming of the delivery and pickups between dealerships.
Name of company: Welkom Westvaal GM (Free State)
Duration: 2006 – 2008
Position held: Manager
DUTIES:
Management of the whole used dept.
Buying stock and trading between dealerships.
Management of x3 sales executives and there performs and reaching of targets and x2 cleaners.
Manage the website.
Targets and profit.
All used administrative and files to be signed of and approved before hand over.
All negotiations with clients, before any deal is accepted.
Reference: Hein Viljoen
Cell: 084-***-****
Name of company: Pietersburg BB Auto (Limpopo)
Duration: June 2005 – 2006
Position held: Finance & Insurance Manager
DUTIES:
Middle man between the dealership and all the banks.
Controlling all deals of the floor.
Making sure that all documentation is legal of client and dealer ship.
RICA and FICA documentation.
Signing of approved deals before delivery and signing off the files, before handing it over to the bank for payouts.
Hein Viljoen
Reference: (015-***-****
Name of company: Pietersburg GM Westvaal (Limpopo)
Duration: January 2004 – June 2005
Position held: Sales Executive
DUTIES:
Selling of vehicles and negotiating with clients to close the deal.
Completing deal file before handover to the manger.
Execution of delivery as agreed with client.
License and registration work also to be done by the sales executive.
Reaching monthly targets.
Reference: Hein Viljoen
Cell: 084-***-****
Employment History USA (Kansas City)
Name of company: Ahtos Cleaning & Maintenance
Duration: March 2001 – August 2003
Position held: Accountant (Microsoft 2000)
DUTIES:
Managing of Monthly, weekly and daily production progress and achieving set targets.
All debit and credit administrative work of the company books.
Signing of cheques and monthly salaries.
Reference: Ms. Molly Estess
Cell: (091) 913-***-****
(091) 816-***-**** fax
Spey Drive no: 29; Spey Mannor no: 3,Three Rivers Proper, Vereeniging; 1910
Leon Lambrechts
***************@*****.***
Contact this candidate