Saudi Aramco Piping Designer

JAMIL AKHTER

CAD Designer Mech & Piping/ PDMS/Smart Plant P&IDs

Contact No. : +92-332-******* Email : *************@*****.*** Page : 1 of 5 EXPERIENCE:

Position of Senior Mech/Piping Designer

Total / Current Work Experience

I have 29 Years work experience in different Contractors, Production and Client organizations ( 17+ Years in SAMREF - Saudi Arab)

Over Twenty Nine (29) Years of experience in performing engineering design and constructions on various facilities relating Water supply, Oil & Gas, Commercial and Refining Industries. Crude Oil transportation facilities and flow lines from Oil Wellheads to GOSP (Gas Oil Separation Plant) and utilities from in-plant installation to off-site in addition to design supervision. Applies standard design principles and theories to complete assignment. (manual & Cad system) Utilizes technical manuals to ensure compliance with required design safety factors, tolerances and specification. Understand and performed changes additions and / or revision as required and performs other duties and responsibilities associated with position as and when required. I had worked with OMV (Pakistan) as ‘Engineering Designer’ my job responsibility was prepare design package of all modification work or new jobs carried out at site (Sawan / Kadanwari gas processing plants). Design package contains different drawings (P&ID’s, PFD’s, Piping GA, Piping Isometric, Data Sheets, vendor information’s etc. Experience includes the use of PDMS/ PEGS / Smart Plant P&IDs/Smart Plant Foundation/Microstation IRASB and AutoCAD

Massadr HR Services Company, KSA.

Period: May 2018 to August 2021

Position: Designer Piping/Mechanical

DAR AL RIYADH CONSULTANTS, - KSA.

Period: July 2008 to April 2018

Position: Designer Piping/Mechanical

Project:

i) SAMREF (Saudi Aramco Mobil Refinery Company Ltd.) Period: July 2008 to August 2021

RESPONSIBILITIES:

Duties responsibilities include preparation of working drawings, for Piping Mechanical. For various Samref Technical Services and/or Mechanical Engineering Request

(TSR/MOC) i.e, Piping & Instrument Diagram (P&IDs), Piping General Arrangement, Piping Isometric, Spool details, Fabrication drawing & Materials take off. Develop and checks system design drawing in conformance with project specification. Check and correct manual and computer drawings and isometrics. Communicates and interfaces with other project design and engineering disciplines.

JAMIL AKHTER

CAD Designer Mech & Piping/ PDMS/Smart Plant P&IDs Contact No. : +92-332-******* Email : *************@*****.*** Page : 2 of 5

OMV (Pakistan) Exploration

Gesellschaft m.b.H.

Period: Sep 2007 to Jul 2008

Position: Engineering Designer

RESPONSIBILITIES:

Engineering & Operation Department. Responsibilities include preparation of working drawings Cadd, for piping mechanical. For various OMV Technical Services and/or Mechanical Engineering Request (ECR/TQR) i.e., Piping & Instrument Diagram, Piping General Arrangement, Piping Isometric, Spool details, Fabrication drawing & Materials take off. Of Wellheads. Develop and checks system design drawing in conformance with project specification. Check and correct manual and computer drawings and isometrics. Communicates and interfaces with other project design and engineering disciplines.

DAR AL RIYADH CONSULTANTS, ALKHOBAR, KSA.

Period: July 2002 to Sep 2007

Position: Designer Mech/Piping

i) SAMREF (Saudi Aramco Mobil Refinery Company Ltd.) Period: Jan 2004 to Sep 2007

RESPONSIBILITIES:

Presently assigned at SAUDI ARAMCO MOBIL REFINERY CO. LTD.

(SAMREF) Technical Department. Duties responsibilities include preparation of working drawings Cadd, for piping mechanical. For various Samref Technical Services and/or Mechanical Engineering Request (TSR/MER) i.e, Piping & Instrument Diagram, Piping General Arrangement, Piping Isometric, Spool details, Fabrication drawing & Materials take off. Develop and checks system design drawing in conformance with project specification. Check and correct manual and computer drawings and isometrics. Communicates and interfaces with other project design and engineering disciplines.

ii) SAUDI PETROCHEMICAL COMPANY (SADAF)

Period: May ‘2003 to December, 2003

Duties & Responsibilities:

Duties responsibilities include preparation of working drawings Cadd, for piping mechanical. For various Sadaf Technical Services and/or Mechanical Engineering Request i.e, Piping & Instrument Diagram, Piping General Arrangement, Piping Isometric, Spool details, Fabrication drawing & Materials take off. Develop and checks system design drawing in conformance with project specification. Check and correct manual and computer drawings and isometrics. Communicates and interfaces with other project design and engineering disciplines.

JAMIL AKHTER

CAD Designer Mech & Piping/ PDMS/Smart Plant P&IDs Contact No. : +92-332-******* Email : *************@*****.*** Page : 3 of 5 iii) Olayan Descon Engineering

Period: Feb 2003 to May 2003

Position: Designer Mechanical

Project:

Qasim Cement Plant

Saudi Aramco Exchanger Dwgs

Duties & Responsibilities:

Preparation of General Arrangement drawings, complete with BOM and fabrication detail of bulk oil storage tanks.

Preparation of detail fabrication drawings of stair and platforms.

Preparation of G.A and detail drawings of Stripper columns.

Preparation of G.A and detail drawing of Heat Exchangers.

Preparation of detail drawing of stair and platform for large storage tanks. iv) NATIONAL METHANOL COMPANY (IBN SINA)

Period: July ‘2002 to Jan ‘2003

Position: Designer Mech/Piping

Project:

MTBE Plant

MeOH Plant

Duties & Responsibilities:

Preparation of As Built piping drawings of MTBE & MeOH plant.

Preparation of 3Dimensional drawings for presentation of Mechanical parts.

PETROSIN GROUP, PAKISTAN

Period : Nov-1999 to June-2002

Position: Designer (Mechanical / Piping)

Project:

Liberty H2S Removal Plant (on PDMS)

Gas Polishing Unit (On PDMS)

Liberty Gas Dehydration Plant (on PDMS)

Duties & Responsibilities:

Piping: Preparation of 3D Model of Plant and Piping on PDMS (Piping, Isometrics & BOQ of Piping Fittings etc.) I had also done Piping & Instrument As Built drawings for the project of BP (British Petroleum) Oil Fields (Dhabi, Gonghru, Matli etc) in Eastern Sindh – Pakistan

JAMIL AKHTER

CAD Designer Mech & Piping/ PDMS/Smart Plant P&IDs Contact No. : +92-332-******* Email : *************@*****.*** Page : 4 of 5 Process: Preparation of P&IDs on AutoCAD 2000

Electrical: Preparation of Single Line Diagrams (DBs and MCC), Schematic Control, General Layout’s (Lighting, Motor Location, Area classifications, Power Cable, Fire and Gas Detection Layouts) drawings.

Instrumentation: Preparation of Inst. Interconnection Block diagram, Inst. Point & Line Diagram, Inst. Termination drawing. Instrumentation Look Diagrams (ILDs) and hook ups drawings.

PETROSIN GROUP, PAKISTAN

Period: Oct-1996 to Feb-1999

Position: CAD-Draftsman (Mech/E&I)

Projects:

Garhi Hassu LPG Plant

Mobil Lube Oil Blending Plant

Uch H2S Removal Plant

Uch Dehydration Plant

Fimkassar LPG Plant

Duties & Responsibilities:

Mechanical: Preparation of Pressure vessel detail Dwgs Electrical: Preparation of Single Line Diagrams (DBs and MCC), Schematic Control, General layout’s (Lighting, Motor Location, Area classifications, Power cable, Fire and Gas Detection layouts drawings.

Instrumentation: Preparation of Inst. Interconnection Block Diagram, Inst. Point & Line Diagram, Inst. Termination drawings Inst. Loop Diagrams (ILDs) and hook ups drawings.

HAWKS DESIGN & ENGINEERING SERVICES (PVT) LTD., PAKISTAN Period : Jun-1995 to Oct-1996

Position : CAD Draftsman Mech.

Projects:

Yousaf Sugar Mills Ltd.

Abdullah Sugar Mills

Haseeb Waqas Sugar Mills

Duties & Responsibilities:

Preparation of General Arrangement drawings, complete with BOM

Preparation of detail fabrication drawings of stair and platforms.

Preparation of G.A and detail drawings of Boiler.

Preparation of detail drawing of Gear box

JAMIL AKHTER

CAD Designer Mech & Piping/ PDMS/Smart Plant P&IDs Contact No. : +92-332-******* Email : *************@*****.*** Page : 5 of 5

ECS (PVT) LTD., PAKISTAN

Period : Aug-1992 to Jun 1995

Position : CAD Draftsman

Projects:

Pakistan Tobacco Co. Ltd.

Sarah Textile Ltd.

Tiger Hosiery

Kot Addu Power Project (CZEC)

Duties & Responsibilities:

Preparation of Single Line Diagrams, Schematic Control, Inst. Interconnection block diagram, termination drawings and general layouts of panels and cable tray (LT panels, HY panels, MCCs, DBs, POFI Plants, PLC Panels & AMF Panels etc). Estimation & costing on computer (Quotations + Billing).

DATE OF BIRTH:

04 March 1972

NATIONALITY:

Pakistani

EDUCATION:

Metric from Govt. High School, Zafarwal-Sialkot, Pakistan - 1990 Training:

PDMS Rel. 11.2 Training from Cad Center Singapore - 2000

(Pipe Work Design, Auto Router, PEGs, Structure Design & Reporting Other Qualification:

One year Computer Software Courses from NTCC College, Lahore 1991 Short course in AutoCAD from Micro Tek Computer College, Lahore - 1993 Computer Skills:

Working experience on computer package like:

MSWINDOWS, PDMS, PEGs, AutoCAD, MICRO STATION, Smart Plant P&IDs, EDDMS & MS EXCEL

Contact this candidate