quality assurance processes and recommend corrective action

for all processes.

Job Summary

Responsible for managing and performing daily quality control of activities to ensure that all project is constructed in accordance with established standards.

Assigned by the company to ensure and asses quality of specification and design in order to ensure timely, quality and relevant outcome.

Oct.05, 2018 to April 30, 2019

CJI/PPM (Bored Piling/JG Summit Petrochemical Plant Expansion Project-Simlong, Batangas City)

Position: Head QC Inspector

Duties and Responsibilities

Reviewed approved designed drawing, specification, method of statement of each activity & construction procedure of the project. Inspection of the approved material with the client, checked its material specification, test certificate, manufactured data & material sample.

Conducted testing of materials for bored piling such as concrete compressive strength, tensile strength of rebar, Pile Integrity Test, Tensile Load Test, Compression Load Test and Lateral Load Test of Bored Pile Notify consultant regarding schedule of inspection and assist consultant in attending inspection.

Implement recognized building code in the site such as ACI, ASTM, & AISC. Coordinate construction group in implementing quality of works & safety procedure at the site & do rectification on the comment of the client during inspection.

Attended weekly meeting with the main contractor regarding quality issue and progress of work.

Submitted all inspection report and close DND and NCR issue to the main contractor.

Prepare minutes of the meeting and update all bored pile inspected in terms of rebar & concreting.

May 04, 2015 to Jan. 30, 2018

Daewoo E&C (Safi Independent Power Plant) Coal Power Plant 1,350 Megawatts,Safi-Morocco

Position: QA/QC Civil /Architectural Engineer/Inspector Duties and Responsibilities

Reviewed approved designed drawing, specification, method of statement of each activity & construction procedure of the project. Inspection of the approved material with the client, checked its material specification, test certificate, manufactured data & material sample.

Conducted testing of materials such as concrete compressive strength, tensile strength of rebar, CBR &Field Density Test of Soil.

- 2 -

Implement recognized building code in the site such as IBC, ACI, ASTM, AASHTO & AISC.

Coordinate construction team in implementing quality of works & safety procedure at the site & do rectification on the comment of the client during inspection.

Issued Non- Conformance Report to contractor for not complying the standard procedure of inspection & construction in the site. Conducted Pre-structure inspection, checked rebar sizes installation .Formworks stability, dimension and elevation . Ensure formworks are in correct coordinate.

Conducted Post Concrete inspection by checking the curing of the concrete, providing burlap/hessian cloth and repair of honey comb or crack,

Notify consultant regarding schedule of inspection and assist consultant in conducting inspection.

Informed QC Manager regarding the result of inspection & testing of materials by the client.

Note: Project Managed: Sea Water Intake Structure, Central Control Bldg. Stack/200mtr. High Chimney, 2Km. Dessalination Plant, Discharge Canal, FGD Seal Pit, Weir Pit, Intake/Outfall/Counter Breakwater, Steam Turbine Generator Bldg. Drainage/Sanitary installation& Road/Asphalt works. Dec.13 2012 to 22 Dec. 2014

Daelim E&C (Shoaiba Combined Cycle Project)

Electric Power Plant 1,350 Megawatts -Saudi Electric Company Saudi, Jeddah

Position: QA/QC Civil Inspector

Duties and Responsibilities:

Reviewed approved designed drawing, specification, method of statement of each activity, & construction procedure of the proposed project. Inspection of Approved Material Delivery with the Consultant Poyry, checked its material specification, test certificate, manufactured data & material sample.

Conducted testing of materials such as concrete compressive strength, tensile strength of rebar, Field Density Test of Soil, Pile Integrity Test, Coring Test, Load Bearing Test, CBR, & Pile Driving Test. Issued Non-Conformance Report to contractor for not complying the standard procedure of inspection & construction in the site. Notify consultant regarding schedule of inspection and assist consultant in conducting inspection.

Coordinate construction team in implementing quality of works & safety procedure at the site & do rectification on the comment of the client during inspection.

Implement recognized building code in the site such as IBC, ACI, ASTM, AASHTO & AISC.

Conducted initial inspection prior to final inspection of all civil structure onshore & offshore area schedule for inspection.

Informed QC Manager regarding the result of inspection & testing of materials by the client.

Note: Project Managed: Jetty Structure, Sea Water Intake Structure, Central Control Bldg.,Discharge Canal, FGD Seal Pit, Weir Pit, Intake/ Outfall Breakwater, Steam Turbine Generator Bldg. Drainage/Sanitary installation, Road/Asphalt works. Desalination Plant, Administration Bldg.

- 3 -

April. 17, 2011 to Oct. 17,2012

Hanwha E&C - (Halon Phase-Out & Upgradation of Obsolete Fire Detection, Alarm and Suppression System at KNPC Sites.)Mina Al Ahmadi Refinery. KUWAIT.

Position: QA/QC Civil & Bldg. Inspector

Duties and Responsibilities:

Prepare I.T.P. for Civil & Architectural Construction. Review approved drawing,contract & specification of the proposed project.

Submit inspection test report and notify the client regarding the schedule of inspection.

Survey, check the elevation,exact coordinates and make initial inspection of area subject for inspection interms of formworks, rebar,compaction test, bitumen application, clean lines and safety of the areas. Check test result of Concrete compressive strength, rebar tensile strength,soil & asphalt compaction test in the Laboratory. Checked and inspect together with the KNPC Supervisor all delivered construction materials with test certificate,material specification,materials sample,manufactured data sheet &manufactured catalogue at the site. Attended safety meeting & work permit procedure with the KNPC, Assisted KNPC Supervisor in conducting final inspection at the site. Coordinate with the construction regarding the outcome of inspection, and the comments of the client for rectification. Records and Filing all finished inspection for future reference. Note: Project Managed: 220Kv.Substation Bldg., Electrical Duct Bank & Manhole,Fire suppression pipe line installation, Drainage/Sanitary installation& Road/Asphalt works.

February 15, 2009- Dec.28,2010(Note: Early Finish Project) Daewoo-Libya (Misurata Combine Cycle Project)

Electrical Power Plant, 850 Megawatts.

Position: Q.C. Civil Inspector

Duties and Responsibilities:

Submit inspection test report and notify the client regarding the schedule of inspection for tomorrow.

Survey, check and verify the exact location, elevation and coordinate of the proposed project to be inspected.

Make initial inspection of the areas to be check by the client interms of rebar installation, compaction test, formworks, cleanliness and safety. Ensure good quality of works which is fully accepted by the client.

Coordinate with the construction group regarding the outcome of inspection and informed them some areas need to rectify and repair. Inspect, check and submit all delivered construction materials with approved test sample and result to the Q.C. MANAGER and Client. Assisted client in conducting final inspection

Attended meeting regarding the progress of the project and discussed some problem arises at the site.

- 4 -

Records and filing all finished inspection for future reference Checked Test result for concrete compressive strength, Rebar Tensile Strength, Soil Compaction or Plate Bearing Test of Soil in Laboratoy.

Note: Project Managed: Sea Water Intake Structure, Central Control Bldg.,Discharge Canal,Seal Pit, Weir Pit, Intake Breakwater, Steam Turbine Generator Bldg. Drainage/Sanitary installation,Concrete Pavement Road/Asphalt works. Desalination Plant Bldg., Administration Bldg.

January2007 – May 2008

M/s Profiles RH construction L. L. C.

P.O. Box 656, Sharjah U.A.E.

Position: Site Civil Engineer

Duties and Responsibilities:

Supervised closely all phases of civil works activities, ensured prompt completion and quality of works which is in accordance with standard and specification.

Prepare schedule of works, manpower, materials and equipment needed in the project.

Coordinate with other contractor in implementing the projects and safety

Assist Consultant and Municipal Inspector (SEWA/DEWA) for the approval of works activity we finished.

Attend meeting regarding the progress of the project Control the allotted budget expenses for the project Note: Project Managed: 220Kv. Electrical Substation Bldg., Administration Bldg. Industrial Plant Bldg.Warehouse Bldg.

Completed Jobs

Client : M/s Dubai Properties

Project : Masar Publishing and Printing Facilities Total Job Value : AED 183 Million

October 2005 – October 2006

Ottawa contraction and Trading W.L.L.

DOHA, Qatar / Tel. # 4327317

Position: Civil Engineer

Duties and Responsibilities:

Allocate manpower, materials and equipment needed in the installation of water pipe line.

Prepare schedule of works for setting out, trial holes, excavation, sand bedding, pipe laying, sand surround, hydro test 9 and 6 bars,

- 5 -

swabbing, sterilization, backfilling, chambers, house connection and reinstatement of road and garage.

Supervise closely all phases of civil/mechanical works intended for water project. Ensure prompt completion with good quality which is accordance with standard and specification

Prepare daily production report of all engineer personnel and attend meeting regarding the progress of the project

Completed Jobs

Project : M/s Abu-Hamour GTC-40 19.777km.

Water distribution Pipeline

Project : M/s Al-Ghuariya GTC-34 12km.

Water distribution Pipeline

January 2001 – April 2005

Anmon Construct

32 Sampaloc St., Sr. Anthony Subdivision, Cainta Rizal, Philippines Position: Civil Engineer

Duties and Responsibilities:

Allocate work scheadule, manpower, materials and equipment based on the approved civil works project

Supervised closely all phases of civil works, ensuring prompt completion and good quality which is in accordance with the standard and specification

Attend meetings regarding progress of work

Prepared daily accomplishment/activity reports of on-going projects Design and Estimate, materials take off for commercial, industrial and high rise building its revision and renovation Check and control budget and unbudgeted materials required for project

Prepare bill of materials based on estimate

Prepare as-built plan.

Completed Jobs

Project : Camella Town Homes, Las Pinas

25 Units Two Storey Residential

Project : Inside Sta Lucia Mall, Cainta

10 Units Food Chain Restaurant

- 6 -

Project : Sumulong High School, Marikina

3 Storey High School Building

May 1994 – January 2001

New World Renaissance Hotel Makati

Esperanza St., cor. Makati Ave., Makati City, Philippines Position: Building Maintenance Engineering (Mechanical/Plumbing) Duties and Responsibilities:

Inspect, maintain daily and do necessary repairs immediately if needed of all mechanical, plumbing and sanitary installations and systems, including its fixtures and auxiliaries according to deluxe and modern hotel standards

Inspect and check hourly the operation of sewage treatment plant, submersible and sewage pumps, water reservoir, and fire pumps, record or log its data.

Inspect the repair of guest room fan coils unit.

Clean, inspect and repair immediately if needed all installation pertaining to fire fighting and fire water sprinkle system. Install, maintain and repair domestic cold and hot water supply including calodifier and heat exchanger.

Maintain Clean and service sewage systems pumps aerator installation and related equipment.

Ensure that all standby units are fully operational when needed.

- 7 -

Contact this candidate