QHSE and Maintenance Manager, electro-mechanical and instrumentation
Resume:
AVTUDOV VALENTIN MIREL
Maintenance Manager (RPPM)
PLACE OF BIRTH: Romania
MARITAL STATUS: Married
NATIONALITY: Romanian
ADDRESS: *** ******** *****, ********, *******
***********@*****.***
FOREIGN LANGUAGES:
English – fluent ; French – medium
EDUCATION:
Bachelor degrees in Hydro Construction Engineering, 1987, Hydro Technical Faculty, Polytechnic University “Gh. Asachi” Iasi, Romania;
Risk Management in uncertain conditions” by Romanian Institute of Management (IROMA)
Internal auditor for environmental system management by ISO 14001: 2008” TUV Rheinland – Austria ;
Environmental Inspector" for process monitoring and employees training;
Risk assessment for health and safety” (40 hours) for work and activity into a major risk petrochemical company., University of Bacau is similar with CIEH Level 4 Award in Health and Safety Certification.
Wastewater treatment management”, Polytechnic University of Bucharest;
Technical College Diploma, in Electro-Mechanical, Instruments and Automation, Romania;
EXPERTISE:
Preventive and Routine maintenance project manager for mechanical, electrical and instrument equipment in oil & gas and utilities plants,
Water and wastewater management proficient and highly trained (20+ years experience)
Highly skilled Safety and Environmental Engineer with over 20+ years of experience performing Safety, Environmental, Quality, Fire and emergency services, Documentations/ Studies and implement QHSE requirements, standard and legislation.
No harm events, no environmental accidents, good responds in emergency situations, QEMS Responsible in oil & gas and petrochemicals. Accident investigation experience. Work permit and H2S certification for oil & gas (onshore and offshore).
Civil, underground and hydro construction engineer experienced. CSCS card holder.
Specific training: Confined Space Entry-Escape& Working -BA License; Working at Heights Certification; IPAF 3a/3b License; First Aid at Work Certification; Emergency Oxigen Kit training; FLT- Counterbalance License; Hazards of Substances training; Manual Handling training, Legionella awareness certificate, Site Environmental Awareness trained, Fire Marshall certificate, Drug and Alcohol screening certificate.
18th Edition (Level 3 C&G 2382-18) Certification
IOSH Certification for Managing safely
PROFESSIONAL EXPERIENCE:
August 2019 – prezent
Maintenance Manager
Maintenance activity for a MBT plant, Waste industry
Company & Location: URBASER& Balfour Beatty (Basildon, Essex, UK)
Responsibilities:
Coordinate and supervise PPM or reactive maintenance activities for dynamics and statics equipment on the plant (cranes, shredders, conveyors, air compressors, optical separators, Eddy current separators, motor and gearboxes, SCADA system monitoring or invertors and PLC’s, even fans or pumps, etc.) aiming to achieve maximum plant availability, with zero unplanned down time.
Conduct safety compliance inspections and maintain records for legal requirements and our client satisfaction.
Ensure that scheduled work is completed on time on business requirement and client (county council) specifications.
Work/apply and maintain HSE standard operating procedures as required.
Develop/document training materials to facilitate transfer of skills and knowledges.
Ensure an effective economical control of critical spares for all key processes and purchase new spares and materials if need, on an allocated budget.
Provide training, work direction and guidance for all team members.
Make and review Risk Assessments and Method Statement, Work Package Plan for different contractors and tasks.
Develop, implement and review PPM systems to deliver a high performance and support for the business plans and KPI’s.
Lead and manage teams for some projects to deliver it in time and allocated budget, with specific requirements.
Prepare weekly and monthly documents and keep KPI’s matrix by using CMMS software.
Ensure spare parts supply, keep connection with third parties, services contractors, or authorities.
2017 –2019
Maintenance Supervisor
Maintenance activity for Hazardous Chemicals (“Serious about Safety” – company motto)
Company & Location: UNIVAR Ltd. a Global Chemical Co., Wellingborough, Northamptonshire, UK
Responsibilities:
Coordinate and supervise preventive, breakdown and scheduled maintenance activities for dynamics and statics equipment on the site (COMAH site) and for other sites from Midland and southern England.
Prepare and ensure scheduled inspections for chemical tanks, pipework, bunds and other safety critical equipment’s on plants (centrifuge pumps, dosing pumps, air compressors, chemical filling machines, heaters, cooling tower, instruments, etc.) with my team and with other sites manager’s support.
Prepare weekly and monthly documents and keep KPI’s matrix by using CMMS software.
Ensure spare parts supply, keep connection with third parties, services contractors, or authorities.
Collaborate with other regional sites, departments and teams for the success and development of UK Co. business, under the Seveso III regulations and legislations.
2011 – 2017
Project Manager for Preventive and Routine Maintenance / HSE Manager
Oil & Gas Maintenance
Company & Location: Al-Jalhami Cont. & Trad. Co. contractor for routine maintenance in KJO (Al-Khafji Joint Operation), Al-Khafji, Kingdom of Saudi Arabia
Responsibilities:
Lead, coordinate and supervise all routine and preventive maintenance for dynamics and statics equipment in KJO, oil & gas Company (onshore and offshore) and achieved the work standard request.
Lead and train all teams with ARAMCO standards (M&E and HSE standard requirements) applied in KJO.
Supervise mechanical, electrical and instrumentation activities for accomplishing the daily schedule and monthly target on allocated budget, to ensure a good operation activity in all company plants (Oil, Gas and Utilities).
Lead and support all teams with my experience in dynamics (pumps, compressors, fans, blowers), statics (heat exchangers, boilers, reactors, piping and valves), motors, switch-gears, electrical circuits and cables, DCS/PLC, detectors, transmitters, controllers, control valves, MOV etc. and achieved the specified standards/legal requirements for maintenance.
Monitoring the spare parts purchasing, third parties activities, vendor schedule for dynamics and statics overhaul or break down, to ensure a right and lower expenditure .
Applied “ARAMCO Const Safety Manual”, I’m a “Work Permit Receiver” and have “H2S certification” in oil & gas for onshore and offshore.
Provide and use written instructions to establish work methods, explain the sequence of operations, outline potential hazards at each stage and indicate precautions.
Check over work methods and precautions with supervision before work starts..
Prepare or lead the QA/QC activities for new projects by ARAMCO standards (SAEP, SAES and SAMSS) required to be applied, ASTM or ASME.
Coordinate with the Planner the preparation and update of the Project Schedule, Manpower Schedule and Jobs’ Budgeting.
Prepare and support activities for monthly financial documents need to be done (bills, invoice, reports, purchase orders, etc.).
Ensure interface with all KJO departments (maintenance, engineering, operation, financial, contract and HSE), onshore and offshore.
2007 – 2011
QHSE Chief Engineer
Company & Location: Energy Bio Chemicals Bucharest – CAROM Onesti Subsidiary (oil &
gas and petrochemicals Co.), Onesti, Romania
Responsibilities:
Lead quality internal audit’s activity performed by TUV- Austria for certification and verification, by ISO 9001 standards.
Implement, maintain, improve and control the Quality Management System and Environmental Management System (QEMS Responsible).
Monitor, calculate and evaluate all element parts for annual greenhouse gases GHG emission certificates (Green Certificates) EU ETS by national distribution allowance, to decrease emission and capitalize or invest in new technologies.
Supervise biological WWTP activity by input-output of water quality elements monitoring, maintenance requirements, personal’s training and evaluations.
Lead, coordinate and supervises technical control of conformity for all products by chromatographic laboratory activities and environmental laboratories (for air and water monitoring) in conformity with the quality and HSE policy, plans, standards and regulations applied.
Train employees with safety work procedures and specifications, to ensure optimum efficiency in conformance with specified health and safety requirements.
Lead risk assessment activity and work inspections/ accidents, required by “zero” work events policy.
Lead and prepare fire protection activities for emergency situations, fire events and fire authorization/notice.
1990 – 2007
HSE and Chief of Department - WWTP (>4000 cm/h effluent)
Company & Location: CAROM – oil & gas and petrochemicals Co. (synthetic rubber and liquid gases), Onesti, Romania
Responsibilities:
Ensure current activity: safety and environmental plans, preventive maintenance and overhaul scheduled for static and dynamic equipment’s, inspection, authorization and metrology also, personnel’s qualification and training in WWTP usual activities. Apply HSE policy and quality requirements for this critical Company’s plant.
Use and apply work procedures and specific requirements for safety, quality and environmental management system – QHSE system.
Lead chemical and biological lab monitoring and analysis for wastewater and bio sludge, on water cleaning process, to adjust process for less pollutant discharged on effluent as plant environmental policy and Authority require.
Supervise the analysis of information on injuries, damage and production loss. Assess accident trends and review overall safety performance.
Monitor compliance of quality limits for water outlet in accordance with applied legislation and supervise wastewater testing labs (chemical and micro biological) activities.
Optimize operation requirements (flow, pH, temperature, dissolved oxygen adjustments and microbiological nutrients dosing) for a viable active sludge (biomass) in bio tanks, to obtain minimal costs and less penalties by water discharge quality with maximum efficiency/cleaning performance.
Optimize waste water circuit and active sludge circuit for a good performance and improved efficiency of biotanks and effluent quality.
Lead preventive and reactive maintenance, according to the procedures applied for dynamics and rotating equipment’s (pumps, turbines, fans, blowers, aerators and others rotating equipment), or statics, technological tubing /piping, for a continuous process without damages or accidents.
Ensure logistics and specific spare parts and make inspection plans for prevention.
Draw up of estimate costs, price provisional and budget estimation, calculations for their own works, to decrease consumption and price, to improve activities (Lead principles).
1987 – 1990
Hydro Construction Engineer
Company & Location: Cold River- concrete double arch dam, Poiana Rusca, Caras-Severin county, Romania
Responsibilities:
Coordinate underground drilling team for adduction and diversion galleries : supervise perforation’s activities, explosives handling, front shooting, loading and shipping materials, wall supporting, water drainage and ensures current logistics, also ensure employees’ training in strictly underground HSE rules .
Analyze the conformity of execution plans, designs and technical standards applied for this site and make corrections.
Participate also with other teams to excavation of dam ampriza (dam foundation) with air drilling equipment’s and explosives blasting, loading and shipping embankments.
Plan and lead activities for excavation machines, rock fills shipping, leveling for access roads and riprap cofferdam construction.
Check commissioning documentations, in conformity with special applied rules and techniques for rock fill and concrete molding.
Contact this candidate