Teofanis C. Barros Jr.

Address: Blk ** Lot * Saint Phillip St., Brgy. San Bartolome Novaliches Q.C.

Mobile No.: +679*******

Email Address: adp2t2@r.postjobfree.com

Position Applied: SMAW / GMAW / FCAW Aluminum welder CAREER SUMMARY

With 8 years working, I am already competent in welding works on accordance with the Welding Procedure Specification (WPS) in application welding codes and standards. I am good on all welding positions that I have acquired from different techniques in actual and theory in order to achieve higher welding quality output. Do fabrication following welding symbols and technical drawing for a specific finish product. I do operate semi-automatic machines such as SMAW, GMAW and FCAW. Well oriented with the welding safety practices and is fully cooperative in complying with any project procedure and easily adapt to different work ethics and environment. Initiates works, reliable, committed, honest, hardworking employee who can work under direct or indirect supervision that produces positive results. Accomplishes assigned duties efficiently and enthusiastically. WORK SUMMARY

Company Name: TRADERITE Pacific Company Limited

Location: Laucala Bay Road, Suva Fiji bound of New Zealand Duration: May 29, 2017 up to Present

Position: SMAW, MIG, FCAW Welder/Fabricator Supervisor Duties and Responsibilities

Manage staffs and assigning specific duties. Inspection of schedule bolts on structural steel members in position and weld size and quality prior to 3rd party inspection.

Lay out designs or dimensions from sketches or blueprints on stone surfaces by free-hand or by transferring them from tracing papers, using scribes or chalk and measuring instruments.

Do fabricate all kinds logo designs for gates, using steel plates 2.mm to 3.mm thick and all kinds of window grills. Remote control gates, and stairs railing design, including door and Modified Door Lock and interior design.

Cut, bend, or weld steel pieces, using metal shears, torches, or welding equipment.

Unload and position pre-fabricated steel units for hoisting as needed.

Do fabricate and lay-out trusses tacking and full weld such as bottom cord, top cord, continues lateral brace, web bracing, gusset plate, cleat purlin, angle cleat, base plate ECT.

Performed high quality MIG/FCAW/SMAW welding for heavy thickness of plate like beams, box column, storage tank and pressurized tank and others.

Full weld of any heavy protect base on job order and comply with the welding engineer for the right standards of work.

Performing any combination of duties to assist workers in welding, brazing and thermal, and arc cutting activities.

Company Name: OGP-Tow Hits Metal Services

Location: #198 Don Felipe St. Tandang Sora Quezon City Philippines. Duration: August 11,2015 – May 19, 2017

Position: MIG Welder

Duties and Responsibilities

I Manage all fully weldings. Such as fully welds pipe seamless for Tow-hits. Stands plates, Ring bars, Ear round bars, Half-moon plates, Bull mounts, triangle brackets using MIG for the good products of welding and all welding activities and repairs.

Prepare materials pipe seamless and plates for Tow-hits bike rack.

Prepared and cleaned stand plates and base plates using grinder.

Lay out all kinds of To

w-hits bike rack. According to the model of cars like others. Montero, Fortuner, Vios, Avanza, Starex, Subaru and others.

Fabricate and mounting Montero bull bars.

Fabricate bull mounts, rizer, extension and spacers.

Do bending pipes seamless with patterned for Tow-hits.

Fully welding stand plates both sides using MIG or GMAW.

Fully welding pipes all around using MIG for the finish product.

Fully welding bull mount, rizer, extension

Repaired Tow-hits bike rack, stand plates, bull mounts, and rizer preparation for powder coating.

Apply housekeeping and safety rules.

Company Name: Wasa’et al Naqil Factory for metal Industry Location: KSA Riyadh Saudi Arabia

Duration: February 28,2015 – June 7,2015

Position: Aluminum Welder

Duties and Responsibilities

I assigned as a Lead man Welder and Lay-out heavy chassis and fabricate heavy oil BI- Tank,Alketran tank, Aluminum food storage with stainless tank and other tanks, also assigned for inspection all welding for the finish products.

Fabricating and fully welding of all kinds of heavy trailer vehicle chasses and tanks. Using MIG aluminum, MIG Co2, FCAW and SMAW for the welding process.

Do fabricate and fully welding aluminum tanks and van for storage.

Do fabricate and fully welding stainless tank for drinking water and other purposes.

Do fabricate and fully welding of fuel tank for gasoline diesel and oil for Aranco and Sasco company.

Do fabricate and fully welding of dump truck of garbage and other garbage casing.

Do fabricate and fully welding of B.T tank for Alketran splats and Galvanize Iron G.I tank.

And also fabricate and fully welding trailer chases for fuel tank and dump truck including the heavy cargo.

Trailer chase fliptop as a whole body including fabricate stairs.

Fit-up and fully welding B.I pipe inside the tank using heater of alketran.

I assigned fully welding of all part inside the tank which is fuel tank, water tank, alketran tank and others.

And also assigned fabricate stairs stainless and B.I pipe including welding repairs under chases repair welding tank repair and others.

Company Name: Saudi-Canadian Rigid Fiberglass RICAF L.T.D. Location: P.O. box 59346 Riyadh 11525 Kingdom of Saudi Arabia Duration: August 12,2012 – September 21,2014

Position: SMAW / GMAW Welder

Duties and Responisibilities

I was worked at Saudi Canadian Company in almost 2 years. I was assigned as a foreman to supervise all of their projects in any point of Riyadh Saudi Arabia. I managed some welding activities, according to a highest standard Welding Procedure Specification

(WPS) and all fabrication such as Monorail, Column, Rail I-Beam, Installing monorail and installing cleaning machine, skylight structural hydrant and some others welding activities.

Do fabricate and Layout rails I-beam for cleaning machines single jib arm.

Fabricate I-beam column fir twin rack and pipes column.

Do fabricate monorail bracket for cleaning machine 200mm plate thickness.

Installed power module twin rack horizontal roof machine as a whole machine.

Do fabricate and layout tubular frame for the skylight structural. Thickness 6.2mmx14.5mm and full weld fine all around.

And also fabricate twin track c-beam for ECG. Elevator 5.1x10.2 thickness 3mm.

Do fabricate tubular stainless frame for spider glass exhibit. Thick 5.1mm x 10.2mm full weld all around flush grind and buffing for the finish product and other sizes of tubular braces and bracket for curtain wall.

Well oriented with the welding safety practices and is fully cooperative in complying, with any project safety procedures.

Company Name: Champion Furniture Manufacturing Inc. Location: 116-A Sauyo Road, Novaliches Quezon City Duration: April 20,2009 – June 14,2012

Position: SMAW / GMAW Welder

Duties and Responsibilities

Interpreted welding blue prints, based on welding procedure specification (W.P.S.) and other standard codes.

Monitored the parts used and the parts required for production and notify supervisor of any material requirements and shortages.

Operate grinder to remove excess burrs, welding wire, etc. as necessary.

Operate MIG, FCAW, SMAW, to produce the frame

Performed visual and periodic measurement inspection of parts, products to maintain conformance with quality standards using prints as guide.

Set up welder make necessary adjustment and replace spool of welding wire and tips as necessary.

Read and interprets work orders and daily production schedule.

Required pre-heat to heavy thickness of plate or metal, based on the standard of D1,1.

Uses weld gauges to measure standard metric weld series.

Wearing of protective equipment including safety glasses, insulated welding gloves, leather sleeves, weld apron and welding hood (P.P.E). Company Name: Ferrotech Steel Corporation

Location: 6409 Riverside, Tatalon St., Valenzuela Metro Manila Duration: August 9,2005 – February 12,2008

Position: SMAW / GMAW Welder

Duties and Responsibilities

Selected Materials and equipment required for welding processes.

Fit up and tacking upper and lower cylinder gas tank preparation for circular saw machine welding.

Fit up handle and foot-ring into cylinder tank.

Assembled neck ring and collar plate for handle of cylinder gas.

Repaired welding and aligned foot rings and handle using grinders and compass.

Do operate drawing machine to cut cylinder tank.

Do fully welding foot ring and handle of 50kg cylinder gas tank using MIG machine.

I assigned fully welding of neck valve of cylinder gas tank using automatic essic machine.

Inspected completed welds for any cracks and defects.

Deliver the highest standards in quality work and productivity levels

Knowledge of quality assurance and safety standard and procedures. REFERENCE

(ASME B31.1) Boiler and Pressure Vessel Code

(ASME B31.3) Piping Process

(ASME B31.4) Pipeline transportation system for liquid

(ASME B31.8) Gas Transmission and Distribution Piping System

(API 1104) Welding pipelines and related facilities

(AWS D1.1) Structural Welding Code

DEFINITION

(SMAW) Shielded Metal Arc Welding

(GTAW) Gas Tungsten Arc Welding

(GMAW) Gas Metal Arc Welding

(STT) Surface Tension Transfer

(CRCW) Consulting Representatives Company Welding

(FCAW) Flux cord Arc Welding

(SAW) Submerged Arc Welding

(HDPE) High Density Poly Ethylyne

(PQR) Procedure Qualification Test

(WPS) Welding Procedure Specification

(WQT) Welding Qualification Test

(NDT) Non-Destructive Testing

(NDE) Non-Destructive Examination

(PWHT) Post weld heat treatment

(ANSI) American National Standard Institute

(ASME) American Society of Mechanical Engineers

(AWS) American Welding Society

(API) American Petroleum Institute

(ABS) American Bureau of Shipping

(ASTM) American Society of testing Material

(MMA) Manual Metal Arc

Educational Attainment

Vocational : (TESDA) Technical Education and Skills Development Authority. Upgrading in Welding

February 9,2009 to August 18,2009

Secondary : Novaliches High School (1996 – 1997)

Elementary : San Bartolome Elementary School (1992 – 1993) Training and Seminar Attended

(CSWSTI) Cebu Science of Welding and Skills Technology Inc.

Training Course: SMAW NCII, GMAW NCII, FCAW

On the Job Training

CSWSTI Cebu Science of Welding and Skills Technology Inc. Welding Trainor

SMAW – Shielded Metal Arc Welding

GMAW – Gas Metal Arc Welding

FCAW – Flux Cored Arc Welding

Achievements

License Certification

SMAW NCII – 091*********

GMAW NCII – 091**********

WQTR – W#1101.3G SMAW

WQTR – W#1101.3G GMAW

Certified SMAW Welder NCII – 091*********

Certified GMAW Welder NCII – 091**********

Certified FCAW Welder

Certified Aluminium MIG Welder

OJT Certification Welding Welding Trainor SMAW / GMAW / FCAW (CSWSTI)

Certificate of Training SMAW NCII

Certificate of Training GMAW NCII

Employment Certificate. Wasa’et Al Naqil Factory for Metal Industrial.

Employment Certificate. Saudi Canadian Rigid Fiber Glass Co. LTD

Employment Certificate. Ferrotech Steel Corporation I hereby affirm that the information of his record was, true and that I have with held nothing which would my employment with the company.

Teofanis C. Barros Jr.

Applicant

Contact this candidate