Post Job Free
Sign in

Site Engineer Civil

Location:
Umm al-Quwain, United Arab Emirates
Posted:
October 11, 2021

Contact this candidate

Resume:

MOHAMMED SHOAIB ZEESHAN

Contact No: +971-**-**-***-**.

E-mail: adoz05@r.postjobfree.com

NOTE: Ready to join as soon as possible.

A Civil Engineer with 11+ Y ears of Construction work Experience and a Registered Member of Society of Engineers UAE, Worked as a Site Engineer with 2 –Years of Experience in Jeddah, K.SA. & 3 –Years (Currently Working on Villa Projects) in UAE in addition to 6-Years and 9-Months of Construction Work in India. My Career objective is to combine my creative ability and positive approach towards the best and productive future, my goal is to reach a level of excellence through hard work and Management Methodologies, committed approach to synergies hard work with efficiency to create outstanding and positive results. EDUCATION

Aug-2008 : Bachelor’s Degree (B.E CIVIL)

Bapurao Deshmukh College of Engineering, Sewagram, Wardha. RashtraSant Tukdoji Maharaj Nagpur University, Nagpur. Higher Secondary School Certificate (HSSC).

Yashwant College, Nanded, Maharashtra.

Secondary School Certificate (SSC).

Nehru English School, Nanded, Mahrashtra.

AREA OF EXPERTISE

SITE EXECUTION:

• Supervision of Excavation for Building.

• Building Line Out and Checking its Diagonals.

• Mark out of Building Column Footings and Lift Pits.

• Checking Reinforcement For Footings, Rafts for Lift, Lift Walls.

• Casting of R.C.C. Footings, Rafts For Lifts and Stub Columns.

• Casting of R.C.C. Plinth Beams, Checking Reinforcement for Plinth Beams.

• Damp Proof Coursing for Plinth Beams.

• P.C.C. of Ground Floor and Parking Area.

• Reinforcement Work for Column and For Slab Checking.

• R.C.C. Columns Casting and Slab Casting Works.

• Determining the Steel Reinforcement Required for Column and Slabs.

• Brick Masonry Line Out work for Respective Floors.

• Waterproofing of Bathrooms and W.C.

• Internal and External Plaster Work of the Building.

• Plumbing Work Inspection from Start to Finish.

• Finishing Item Work, Flooring.

EXPERIENCE PROFILE

I. Working for Mega Building contracting L.L.C UMM AL QUWAIN, UAE. Designation: CIVIL SITE ENGINEER From 01/10/2018 to till date.

•Currently Working on Villa Construction Project in Ajman on a Plot Area of 320SQMT,400SQMT & 170SQMT Town House

•Worked on Various Villa Projects in the Emirates of Umm Al Quwain, including Renovation and Proposed Extension Area of Villa Cum Palace belonging to one of The Royal Family of Umm Al Quwain.

•Executed Sub Structure as well as Super Structure work comprising of Footings as well as Raft Foundations, septic tanks, underground water tanks, hollow block work of front side compound wall of length 306Meters and having a height of 4.1M. Executed a Hourdi slab with infill polystyrene sheets, and a flat slab as well, The Scaffolding work was done with Cup Lock System and Deck Slab, we have done

. block work by thermal insulated blocks of 8inches, and carried out the plaster work of 2cm thickness for the wall Heights of 4.95M having a Floor height of 5.35M

• Finishing Item Work Floor Tiles work of Size 60cmX60cm & 120cmX60cm Porcelain Tiles and Wall Tiles of 60cmX30cm of RAK Brand Made.

• Internal Stucco Putty, Primer and Paint work of National Paint Brand.

• The False Ceiling Work done with Gypsum Particle Boards and Lay in tiles of Size 60cmX60cm in the Middle Portion.

• As a site Engineer my role is to Execute the work on field and to make sure the workers are having the P.P.E while working on site and also to determine the Quantities of material required for various structural construction works carried out and checking the drawings and documents used at site for approval and compliance with project requirements in accordance with the Client requirements and as per the Consultants approvals. II. Worked for CIVIL AND ELECTRICAL PROJECTS CONTRACTING COMPANY

(CEPCO) JEDDAH, KSA.

Designation: SITE ENGINEER. From: Nov 2015 to Nov 2017. WORK DETAILS:

• As a Site Engineer Handled the Daily Site Execution Works.

• Carried out Excavation of Trench’s for Laying Underground Cables of 380KV from Sub Station to Sub Station.

• There were 21sections of 583M each for Laying Cables of 380KV, the size of Trench were 2.4 X 1.9 M. for single Circuit and 5.2 X 1.9 M for Double Circuits.

• For single Circuit there were 3 Cables of 380KV each, and for Double Circuit there were 6 Cables of 380KV each.

• Every Day used to carry out Safety Meetings with Labors called TOOL BOX TALK for carrying out work in safe and sound manner, giving them Instructions on Importance of PPE.

• Use to Discuss the Work Procedure with Consultants of the Saudi Electricity Company & National Grid for caring out work as per the norms and requirements of the Clients.

• Once the Cables of 380KV were laid in the Trench by the Electrical Cable Pulling Teams, My team’s job was to bury the cables by sand blinding, and then laying OFC (Optical Fiber Cable) Conduits then sand blinding over the cables.

• Cable Tiles Laying over the sand blinding, used to determine the no. of Cable Tiles Required to be laid.

• Use to Carry out Safety Inspections of the Laborers working on site periodically.

• Use to attain meetings for progress of the work on site with the Higher Officials.

• Use to inspect and supervise the work on Site and coordinate with the Consultants for Improving the Quality of Work .

• Used to lay Wire Mesh over the sand blinded Cable Tiles then again sand blinded the Wire Mesh.

•Used to Lay Sub base material of 25CM over the sand blinded Wire Mesh Compacted with Vibratory Compactors to Attain the Required Density and Moisture Content.

• Laid Asphalt of 10Cm in two layers of 5CM each Compacted in Two Layers Respectively.

•While carrying out the work were adhering to the Required Quality and Workmanship as per the Consultants of Saudi Electricity Company and National Grid III. Worked for: PLANUM GROUP, HYDERABAD, INDIA.

Designation: SITE ENGINEER. From: June 2012 to Oct 2015. WORK DETAILS:

• Used to Carry out Site Supervision for Independent Row Houses of various sizes of 250,270,300 Square Yards.

• Worked on Residential Building Projects of G+5 story Residential Buildings.

• Estimation of Materials Required for the Row Houses, Bricks Required for Brick Work Cement required for all the RCC work like Footings, Stub Columns and Plinth Beams, Staircases.

• Finishing Item Material Required Floor Tiles, Bathroom Tiles, Dado Tiles, Fittings and Fastenings.

• Checking of Reinforcement Steel of Footings, Columns, Plinth Beams, Staircase, and Slabs.

• BBS of Footings, Columns, Plinth Beams, Stair case, Slabs.

• Coordinating with Clients and the Sub Contractors for various Building work Issues.

• Supervising the Site work that is been carried out and Maintaining Daily Progress Reports.

• Billing work of Contractors.

IV. Worked for: RAOJEE CONSTRUCTIONS, PUNE, INDIA. Designation: SITE ENGINEER. From: Nov 2009 to May 2012. WORK DETAILS:

• Worked on a Gated Community called, “Palladium Homes” Comprising of G+7 Residential Buildings with Club House.

• Worked on a Gated Community called, “The Village” Comprising of G+5 Residential Buildings having an Average Slab Area of 8945 SQFT.

• As a site Engineer was involved in Various Construction activities and Site Supervision.

• Checking the Building Diagonal and layout after excavation for Building’s column Footings.

• BBS of column footings, staircase, and lift pit rafts and RCC wall for Lift.

• Checking Reinforcement for footings and Columns before Casting.

• Was involved in checking and verifying job orders and reporting the same to ProjectEngineer.

• Was involved in Site execution and maintaining daily progress report.

• Used to attain meetings on daily progress of work on site with the Project Engineers.

• Attending the Structural Consultants for Reinforcement checking before Casting ofslabs.

• Checking shuttering and form work for slabs, columns, lift walls before R.C.C casting work.

• Checking brick work line out for flats, checking wall plaster internal and external.

• Billing work of various Finishing item works.

V. Worked for: SARA CITY, CHAKAN, PUNE, INDIA.

Designation: JUNIOR ENGINEER. From: Oct 2008 to Oct 2009. WORK DETAILS:

• Worked on a Gated Community called, “SARA CITY” Comprising G+5 Residential Buildings.

• As a Junior Engineer was involved in coordinating with shuttering carpenters and Steel fixers for column footings erection, checking steel reinforcement before casting R.C.C

• Was involved in making daily progress report, keeping record of cement bag’s consumption on daily basis.

• Studying Structural and Architectural drawings and checking for any mistakes if any and report to Senior Engineer on site.

• Checking column Footing reinforcement and shuttering before Casting work and reporting to Senior Engineer if found any mistake.

PROFESSIONAL TRAINING

• MS OFFICE.

• PRIMA VERA.

• STAAD PRO.

• AUTO CAD.

OBJECTIVE

I am a highly dedicated individual who has an ambition to succeed highly in any environment. I love to be best among the equals and to prove as an asset for the Organization with my service. To use my Technical and Analytical skills, my ability to communicate ideas and desire to improve efficiency, in order to share benefits with the organization and to be successful and accomplished in everything that I do.

PERSONAL DETAILS

Date of Birth : 25th Jan 1981.

Nationality : India.

Passport No : K5421255

Visa status : Residence Visa

Marital Status : Married

Sex : Male

Languages : English, Arabic (beginners), Hindi.

Driving license : Automatic Vehicles.

Contact & Whatsapp: +971-**-**-***-**.

MOHAMMAD SHOAIB ZEESHAN.

(B.E. Civil )



Contact this candidate