ROMAN MONSIBAIS MENDEZ

adoxzr@r.postjobfree.com•899-***-****• adoxzr@r.postjobfree.com

Visa laser

Ingeniero Industrial y de sistemas

Concha nácar # 207 villas de la joya Reynosa Tamaulipas

** **os de experiencia en inyección de plásticos

CINCH CONNECTORS REYNOSA (2018-ACTUAL)

Ingeniero de procesos & Supervisor Gral. De moldeo

(Automotive Company)

Plan the production on the machines and make sure the delivery is fulfilled on time

• Coordinate mold changes with Technicians, materialists and leaders

• Experience of new molds cold casting and hot runers

• Experience with molds in Over Mold (Bushings)

• Start of hydraulic molds (cores) limit switch and 3 plates

• Preparation of reports are those that tell me the results of the work done

• I have experience in coordinating and leading personnel

• Management of computer packages Word, Excel, power point

• Use of SMED to reduce time spent changing molds

• Achievement of scrap reduction with parameter adjustment and improvements in the mold

• Implement the KAIZEN for continuous improvement in mold changes

• Coordinate the different departments to achieve the goals

Resins:

ABS, natural polypropylene, Nylon, PC + ABS

Polypropylene, SANTOPRENE

Thermoset powder

Courses:

Scientific molding, SPC, Ecxel

Machines:

ARBUR 250,150 Ton Vertical and Horizontal

STOKES 300Ton

VANDOR250,500Ton

ENGLE: 750, Ton

NEWBURY 300 Ton Vertical

KWAN SUNG ELECTRONICS (2017-2018)

Process Engineer & Molding Supervisor

• Experience in validating new molds of electro valves up to 24

• Use of injection equipment Timers mode A, B, C and hot runers

• Injection experience with steam system

• I have experience in coordinating and leading personnel

• Management of computer packages Word, Excel, power point

• Coordinate mold changes with Technicians and materialists

• Experience of new molds cold casting and hot runers, commissioned and in production

• Start of hydraulic molds (cores) limit switch

• Preparation of reports are those that tell me the results of the work done

• Enforce the EFF, OEE, USE

• Coordinate the different departments to achieve the Objectives

• Use of SMED to reduce time spent changing molds

• Achievement of scrap reduction with parameter adjustment and improvements in the mold

• Achievement of reduction of cycle times. Automating processes and using tools 100%

• My motto is give me solutions not problems.

Resins:

ABS, natural polypropylene, Nylon, PC + ABS

Polycarbonate, Acetal Ring, Filled Polypropylene

Use of color fider concentrates

Courses:

5s, Robot sepro, USE of fire extinguisher

First aid, Wilman Robot, 3-axis OSA, GEMBA

Machines:

CINCINATI MILACRON: 2500,1500 Ton

LS: 3000, 2500, 1800 Ton

LG: 1800, 1500, 750Ton

ENGLE: 750,1500Ton

CEW DE REYNOSA (2011-2017)

Plastic Molding Supervisor and Process Engineer

• I have experience in coordinating and leading personnel

• Management of computer packages Word, Excel, power point

• Make and modify adjustments in the injection process with aluminum to plastic, currently this mold runs within the cycle and parameters.

• Coordinate mold changes with Technicians and materialists

• I reinforced and retrained the 5s staff, currently it is a very Clean and Organized company

• I was recognized by the corporate in this company. For putting several new molds in motion. In production and on the market Rines

• Start-up of new molds for cold casting and hot runers and put into production

And parts on the market (wheels)

• Experience with molds in Over Mold and blow molding

• Starting of hydraulic molds (cores) and (limit switch) and 3 plates

• Preparation of reports are those that tell me the results of the work done

• Enforce the EFF, OEE, USE

• Coordinate the different departments to achieve the Objectives and achieve the goals

• Create new settings in the processes, which are currently running within the cycle and parameters

• Use of SMED I reduce the time in the changes of molds and increase the productivity

• Achievement of scrap reduction with parameter adjustment and improvements in the mold

• Achievement of reduction of cycle times. Automating processes and using tools 100%

• Carry out and train personnel in the use of KAIZEN for continuous improvement in processes

• My motto is give me solutions not problems.

Courses:

5s, ISO TS 16949, ISO140005why, Supervisory techniques

Resins:

Polypropylene, Nylon, capron with fiberglass and Ultramid nylon

ABS.santoprene, Delring

Machines

CINCINATI MILACRON 500 Ton

NISSEI 500 Ton

ENGLE: 200, 500,1100 Ton

ALCOM ELETRONICOS (2009-2011)

Plastic Molding Supervisor (Automotive Company)

• I have experience in coordinating and leading personnel

• Management of computer packages Word, Excel, power point

• Coordinate mold changes with Technicians and materialists

• I reinforced and trained the staff on 5s, currently it is a strict company, very Clean and Organized.

• Experience with molds in Over Mold and blow molding

• Implement the use of the blackboard to meet the priorities, currently the urgency hours have been reduced to days in the Kan van

• Preparation of reports are those that tell me the results of the work done

• Enforce the EFF, OEE, USE

• Coordinate the different departments to achieve the Objectives and achieve the goals

• Create new settings in the processes, which are currently running within the cycle and parameters

• Use of SMED I reduce the time in the changes of molds and increase the productivity

• Make a work plan to speed up deliveries on time in paint and laser

• Achievement of reduction of cycle times. Automating processes and using tools 100%

• Use of Kan van to control the progress of work orders

• Carry out and carry out training for personnel in the use of KAIZEN for continuous improvement in processes and everyone can participate

• My motto is give me solutions not problems.

courses

5s, ISO TS 16949.5 why SPC, OSA, Supervision techniques

Leadership.Gemba, 8Ds

Resins:

ABS, Polypropylene, Nylon, Santoprene, Crastin, Fine,

Polycarbonate, Delring acetal,

Machines:

SUMITOMO DODLE TRIP 250 Ton.

CINCINATI MILACRON 50, 80, 120, 220, 500,750Ton

ELEC MACHINES. JAPANESE 30 Ton.

NISSEI 220,750 Ton

TECHNIMARK DE REYNOSA (2001-2009) Plastic injection molding supervisor (Automotive Company)

• I have experience in coordinating and leading personnel

• Management of computer packages Word, Excel, power point

• Experience in making decisions to avoid having stopped machines

• Coordinate mold changes with Technicians and materialists

• I strengthened and trained the staff on 5s, it is currently a very Clean and Organized company.

• I was recognized by the corporate in this company. For enforcing the requirements and new projects of the same.

• Carry out and train personnel in the use of KAIZEN for continuous improvement in processes

• Preparation of reports are those that tell me the results of the work done

• Enforce the EFF, OEE, USE

• Coordinate the different departments to achieve the Objectives and achieve the goals

• Create new settings in the processes, which are currently running within the cycle and parameters

Attend Molding Process Engineer (2001-2003)

• Experience with molds in Over Mold and blow molding

• Start up and correction of faults of hydraulic molds (cores) limit switch and 3 plates

• Use of SMED I reduce the time in the changes of molds and increase the productivity

• Achievement of scrap reduction with parameter adjustment and improvements in the mold

• Achievement of reduction of cycle times. Automating processes and using tools 100%

• Use of Kan van to control the progress of work orders

• My motto is give me solutions not problems.

ISOTS16949 courses, Basic supervision in molding, SPC, 5s,

Leadership, 5 why. Using SMED

Resins: ABS, Polypropylene, Nylon, Santoprene, Crastin, Fine,

Polycarbonate, Delring acetal,

Machines:

CINCINATI MILACRON 30, 50, 120, 220,500 Tons.

VAN DORN 50, 85, 120, 230, 300, 400, 500, 650,1100 Tons.

INTELECT 50, 165,220 Tons

NISSEI 154,197,233 Tons

ENGLE 200,500 Tons.

TRW DEL PLAS NORTH PARK (1996-2001) Molding Technician (Automotive Company)

• Starting and correction of hydraulic mold faults

• Experience in mold changes

• Overhead crane handling

• Monitor machines that are within parameters

• Start of production and support engineering in the transfer of molds

• Experience in process validation

• Use of Kan van to control the advance of the Ordes

• Experience with plastic resins

• Use of safety and hygiene rules

• Reduction of cycle times in machines

courses

ISO TS 16949 iny. Plastic SPC, Safety and hygiene 5s.

Resins: Delrin, Polypropylene, Santoprene, Valox, ABS, nylon

Machine

CINCINATIN MILACRON 30, 50, 120, 170,220

VAN DORN 120, 170,220

Contact this candidate