Full Name : ROEL B. SUPERALES

E-mail Address : adoxk8@r.postjobfree.com

Contact Number : +880**********(Present Location)

Language : English and Tagalog

Degree Course : Bachelor of Science in Electrical Engineering

Year Graduated : March 1996

University School : Misamis University, Ozamis City, Philippines

Professional Eligibility : Registered Electrical Engineer (Professional License)

Organization : Institute of Integrated Electrical Engineers of the Philippines Inc.

Objective : To contribute the company’s vision and mission with the highest degree of tradition and excellence.

Experience : Offshore (Oil and Gas) – 8 years

Onshore (Oil and Gas) – 13 years

Infrastructure & Chemical Plant – 3 Years

Total Work Experience : 24 Years

Capabilities and Skills :

Generators,Transformers,Switchgears, UPS, Gas Processing, Maintenance,Oil and Gas, Fire & Gas, Substation, Electrical Design/Calculations, Motor Control Centers, Compressors.

Knowledge in Electrical Design(FEED/Conceptual and Detailed), Cost Estimates/BOQ, Supervisions, Feasibilities Studies,Planning and Management.

Knowledge in Primavera (P5) – Software Program for Project Planning.

Knowledge in ETAP- Software Program for Electrical Design/Calculations

Proficient in MS Excell,MS Word,MS Outlook,Visio,Power Point,AuthoCAD,PDMS/PDS tool

Knowledge in HAZID,HAZOP and SAFOP activities.

Familiar with Power System Studies and Protection Relay Coordination.

Have an ability to explore cost saving in design and construction supports activities based on various design and project implementation methods.

Conversant/Familiar in using International Standard such as NEC/NFPA,IEC,BS,IEEE/ANSI, EN/ATEX,API,NEMA,UL and etc..

Trainings and Seminars Attended:

Basic Offshore Safety Induction & Emergency Training(BOSIET),Including HUET & Emergency Breathing System.

International Oil and Gas HSE Certificate

Power System Analysis

Basic Safety Training Course

Electrical Transient Analyzer Program (ETAP)

Primavera 5.0 for Enterprise Project Management

IEC 61850,Remote Terminal Units & Substations Control & Monitoring System

Basic Health & Safety Training -NIOSH

High Voltage and Low Voltage

Industrial & Commercial Electrical Installations

Summary of Work Experiences:

With 24 years of experience in oil and gas both onshore and offshore(Brownfield/ Greenfield project)which includes FPSO,Rigs Platform(Oil & Gas),refinery,petrochemical,chemical, power and infrastructure performing wide range of engineering design supervisions and managementfrom concept/feed through to detailed design which includes power generation and distribution system,electrical lay-outs, relay coordination,relay interlocking and protection for various electrical equipment, including various sizingand calculations such as short circuit, lightning & grounding system, illumination, cable sizing,voltage drop, transformer sizing,variable frequency drive,switchgear sizing,MCC/AC/DCUPS sizing, battery sizing,grounding system, generator sizing and etc... Prepares/review specification, data sheets, operating philosophies,MTO/BOQ,requisitioning and co-ordination of electrical aspects of processing plants,power, infrastructures including meetings with owners and sub-contractors. Prepares/reviews material requisitions for electrical equipment/materials and vendorselections/technical bid evaluations, review drawings for processing modules, mud mixing modules,office modules,earthing system,motors,generators,transformers,VFD,Navigation Aid System, package equipment and other electrical equipment, approves/makes recommendation for approval to client.Perform/supervise installations, hook- up activities,FAT, commissioning and testing of electrical equipment. Supervise the Engineering & EPC/Construction Contractor(s) work for all electrical related activities including any work impacting on power generation/distribution systems (including MCCs, Switchgears, package equipment, VFD,etc..),motors,transformers,UPS systems,SCADA/DCS/ESD,skids,metering,lighting,heat tracing,earthing and lightning systems, CP systems, Electrical Heaters, Fire& Gas detection system etc..including maintenance and operations. Ensures compliance with HSE standards and corporate policies & strategies. Comprehensive understanding of Electrical Protection relays, PLC’s,Power generation monitoring and control, Power distribution monitoring and control, Load shedding controllers. Heavily involve with worldwide project clients such as Exxonmobil, Shell, Agip KCO, Total, Qatar Petroleum, Bahrain Petroleum, Abu Dhabi National Oil Company, ADGAS, Kuwait Oil Company, KNPC, ARAMCO, British Petroleum(BP), BGFCL, JICA and etc…

Working Experience Detail:

June 2020 – June 2021

Company : SMEC International Pty. Ltd.

Project :Natural Gas Efficiency Project (Liquified Natural Gas Refinery/Plant Modification and Upgrading Project)

Location : Narsingdi and Titas-C, Bangladesh

Position : Senior Electrical Engineer–Project Management Consultancy(Owner’s Engineer Side)

Client : Bangladesh Gas Field Company Limited (BGFCL) and JICA

Verify/Check/Approved contractors work related to detailed design and sizing calculations for gas engine generators,switchgears,UPS system,power cables,lighting and small power, earthing and lightning system, fire and gas system, protection relays coordination and monitoring, auxiliary power supply, fire alarm system, cathodic protection.

Inspect/verify contractor’s work at site for generator package equipment, Switchgear, UPS system, earthing system and other electrical installations if it is in accordance with the approved for construction (AFC) design and international standards. Comments as necessary for the electrical installation which is not in line with the approved design and international standard and inform the owner in this regard.

Review and approve concession request, technical query, design changes for the electrical package equipment, electrical installations impacted in the actual installation against approved for construction design.

Evaluate the percent progress accomplishment against the actual installation and prepared weekly report, submit to team leader to incorporate with the other discipline.

Review/Approved and provide comments for pre-commissioning, start up and testing procedure as well as its checklist prepared by the EPIC contractor.

Provide guidance to the contractor and suggestion to owner with regards of the on-going electrical installation what is the feasible solution in order to meet the project specification and schedule.

Witness the Site Acceptance Test(SAT),FAT, pre-commissioning, start up commissioning, testing of protection of relays, breakers, switchgears and generators, provide guidance what to do in order to comply the project schedule required by the owner and financing institution.

Attend meeting regularly with the owner/financing institution and present/discuss actual status of the project.

October 28, 2013- March 2020

Company : AMEC Foster Wheeler ll Wood Plc.

Project :Sangachal Natural Gas Processing Plant and Oil Production Plant terminal Modification/Upgrading(Onshore) and Chirag, Sha Deniz (Rigs Platform Offshore )

Location : Azerbaijan

Position : Senior Electrical Engineer

Client : British Petroleum (BP)

Prepare/approved feasibilities studies for power distribution system and engineering report for the modification/replacement of various HV/MV/LV switchgears,transformers,generators, UPS system, booster pump, injection pump, heat tracing and lighting system and etc.. which involve verification of tie end points, power system studies and adequacy check calculation (load flow, transient stability, short circuit, cable sizing and heat tracing) for the sizing of the existing switchgear, transformer, generator and power cables. Prepare/review modification and installation drawings/lay-out such as single line diagram, protection diagram, interlocking, heat tracing, lighting, equipment and etc..

Prepare/review/approved detailed design for the replacement of MV main switchgear within Offshore project which involve various calculation including protective relay coordination,various electrical layouts, diagrams and etc..

Prepare/approved contractor’s detailed design and electrical sizing calculations for processing modules, office modules, mezzanine modules,topsides related to switchgear/distribution board schedule, power cable, cable trays, lightings,heat tracing, fire & gas system.

Execute and review/approved of engineering drawings (modifications and installation) such cable routing, grounding, lighting, heat tracing, single line diagrams and etc.

Performed technical bid evaluation for power & control cables, cold shrink termination kits, HV/MV/LV Transformer,Switchboard, cable lugs, heat tracing, glands, gas processing modules, mud mixing modules, office modules, navigation aids, package equipment and etc.

Review vendor switchgear drawings such schematic diagrams, interconnections and protection diagrams including relays coordination/interfacing with the existing downstream and upstream relays and equipment.

Interface with instrument discipline for the supply of instrument power, piping discipline for heat tracing, mechanical discipline for pumps power supply, structural discipline for eguipment installation.

Answer to all electrical technical query, concession request from EPC contractor/sub contractor.

Mentor to local engineers and provide directions and instructions regarding the project and endorse to client whenever required.

Witness Factory Acceptance test(FAT), SAT, testing for switchgears, transformers, generators.

Participate in HAZID/ HAZOP/SAFOP workshop and provide input for the reports.

Conduct site survey/inspection/evaluation contractors work at onshore site, oil rigs offshore platform.

Evaluate contractor's installation work and accomplishment/progress report and billings.

Attend project meeting from time to time and report to the principal engineer whenever required.

Sept. 21, 2012- October 21, 2013

Company : Malaysia Marine and Heavy Engineering(MMHE)- Offshore Business Unit(Oil and Gas)

Project : EPC,Hook-up & Commissioning of Rigs Platform(Gas processing) and

Floating Production Storage Offloading(FPSO)

Client : Exxonmobil Exploration & Production Inc. and Total/Petronas

Location : Malaysia

Position : Senior Electrical Engineer

Verify/review FEED drawings and issued technical query to exxonmobil and shell any technical discrepancy related to FEED drawings.

Review detailed design prepare by engineer for single line diagrams, schematic diagrams, interfacing diagrams, block/termination diagrams, cable schedule, power layout, cable tray layout, lighting layout, protection diagrams, interfacing, grounding system, material take off including selection for electrical power equipment,cables,breakers,lightings,junctionsboxes,starters,relays,Ct’s,Pt’s,battery,UPS, and etc…

Verify the existing tie in points and power supply if it is adequate to supply the new gas processing platform load.

Review sizing/calculations for transformers, generators, illuminations, battery, AC/DC UPS, earthing system, voltage drop, short circuit, switchboard, motor starters, MCC and distribution boards including protective relay coordination, protection, interlocking and etc..

Perform technical bid evaluation and review drawings submitted by vendors for navigation aids, solar panels, switchgear/MCC schematic diagrams, package equipment, transformer, generators, AC/DC UPS, package equipment, power and subsea cables, grounding materials, lighting and etc.., approved and recommend to client for approval and coordinate with vendors regarding time delivery of materials.

Conduct evaluation/inspection of all electrical installation and resolve any issues to ensure that all electrical system are within project requirement.

Attend meeting with client Exxon mobil and Shell, discuss matters related to ongoing project.

Nov. 17,2011- Sept. 20, 2012

Company : Daelim Industrial Company(Oil and Gas Division)

Project : EPC of Refinery and Expansion(Oil and Gas)-Ras Tanura and Jazan Refinery Expansion Project

Client : Saudi ARAMCO

Location : Saudi Arabia

Position : Senior Electrical Engineer

Prepare/review various electrical lay-out, specification, data sheet and calculations for power system, relay and protection coordination, load shedding and etc..for 34.5KV/11KV/0.440KV Substation.

Prepare/review sizing calculations for cable size and voltage drop, short circuit, UPS, battery, switchgears and other electrical equipment including protective relay coordination, control protection, interlocking for generator, motor, and transformers.

Perform/review vendors drawings submittal, technical bid evaluations for various electrical equipment,including meetings with owners and sub-contractors inall aspects of modules and electrical systems, system block diagrams, specifications and sub-contractors information including control & instrumentation and power requirements.

Prepares/review of electrical load balance calculations, lighting calculations, short circuit calculations etc..Production of detailed schematic/wiring diagrams, interfacing diagrams with SCADA/DCS/ESD for a wide range of electrical systems of design.

Review/approved design drawings, calculations, material take off and bidding documents submitted by sub-contractors and performed contractor/vendor technical bid evaluations.

Review of commissioning procedures and interface with other discipline to ensure that commissioning procedures are in place.

Supervise/evaluate contractors work at site, review/approved accomplishment/progress billing and participate in HAZOP/SAFOP activities provide guidance for the ongoing project.

Witness Factory Acceptance test for switchgears, transformers, UPS.

Attend technical meeting with the client from time to time and discuss related in electrical activities impacting with the design changes and implementations.

Nov. 02, 2009-Nov. 2, 2011

Company : SAIPEM/ERSAI (Part of ENI)

Projects : Kashagan Development Project (Petrochemical,Oil and Gas, Offshore)

Client: AgipKCO,Shell (Joint Venture)

: FPSO Conversion/Decommissioning and Oil Rigs Platform Uprading

Client: Exxonmobil

Location : Republic of Kazakstan

Project Type : Offshore and Onshore

Position : Senior Electrical Specialist/Senior Electrical Engineer

Prepare/review deliverable list for the design of 11KV/440V sub-station which includes equipment lay-out,earthing lay-out,Single Line and Schematic diagrams, interfacing diagrams, Motor Schematic Diagrams,lighting lay-out and etc…

Prepare/review/approved cable sizing calculation,voltage drop calculation,earthing calculations,transformer sizing calculation,generator sizing calculations, Battery Sizing calculations and UPS Sizing Calculations, cable schedule,switchgears.

Prepare protective relay coordination, protection and control, interlocking for transformers,generators, motors and etc...

Prepared/review man-hour estimates including bill of quantity for the purchase of electrical materials and monitor vendors delivery.

Review/Check/perform technical bid evaluation documents/drawings submitted by sub-contractors including vendor’s submittal for motor control centers, Motors,power cables, junction boxes, power outlets,lighting equipment, cable lugs and glands, cable trays,distributionboards,MainSwitchboards,ContainerizeUPS,ProcessingModules,Mud Mixing modules, office modules and other package equipment, submit to clientfor review and approval.

Issued technical query or concession request to the client with respect to the design changes or discrepancy impacting to cost variation and report to engineering manager whenever required.

Review design drawing package, interfacing diagrams with SCADA/DCS/ESD,heat tracing, schematic/single line diagrams, data sheets, specifications and various electrical calculations submitted by sub – contractor.

Conduct site inspections/supervisions and evaluations for the installations of electrical equipments, hook-up, heat tracing and etc… trouble shoot any discrepancies in the design versus actual site installations/implementations and recommend to client the feasible solution which can reduce cost impact.

Review/evaluates progress billings, project accomplishment submitted by sub- contractor’s impacting to electrical installations, hook-up and etc…

Supervise in pre-commissioning and commissioning activities.

Attend coordination and progress meeting with the client and other interfacing discipline engineers.

Prepares close out report input for client project turn over.

May 12, 2008- July 01,2009

Company :Tebodin Consultants and Engineers

Project :Offshore/Onshore FEED/Detailed/Management (Client :Total, Qatar Gas, Qatar Petroleum, ADNOC)

Project Type : Offshore/Onshore

Position : Electrical Design Engineer/Electrical Engineer(Consultant)

Involved in the preparation of detailed engineering such as preparation of Electrical cable routings, inter- connecting diagrams, single line diagrams, schematic diagrams, grounding system, Lighting Outlets, power outlets, terminations diagrams, cable schedules, load list, distribution board schedules, block diagrams, cable tray lay-out, equipment lay-out.

Prepared calculations such as short circuit calculations, cable sizing calculations, voltage drop calculations, transformer sizing calculation, Switchgear and Distribution Board sizing Calculations, Motor Control Centers sizing Calculation including motor starters, Generator Sizing Calculation, Variable Frequency Drive Sizing, AC and DC UPS sizing calculation,DC battery sizing calculations.

Provide input to the Design Basis memorandum and upgrade/developing engineering standards specifications.

Perform technical bid evaluation for electrical equipment submitted by vendors and recommend to client for approval.

Submit recommendation of the feasibilities study and FEED documents to the client for review and approval.

Review/Check drawings submitted by the EPIC contractor and comments as necessary to comply the requirements.

Supervise electrical installations on site and evaluates accomplishment submitted by contractors.

Coordinates in the evaluation of the design changes in the original scope of work and verifies the implementations of those approved.

Evaluate and verify actual accomplishment billed by the EPIC contractor and submitted to the Electrical Manager for review and approval.

Provide input for pre-commissioning and commissioning procedures and perform supervisions on site implementations.

Involve/participate in the preparation of HAZOP and SAFOP activities.

Dec. 16,2005- May 10, 2008

Company : First Kuwaiti Contracting Co.

Project : Refinery Expansion Project(Oil and Gas)

Client : Kuwait Oil Company (K.O.C.)

Location : State of Kuwait

Position : Electrical Engineer

Acquires and understand the project goals from contract and contribute to define the discipline list of activities in accordance with the contract requirements.

Verify the issued drawings Approved for Construction from client and issued technical query whenever required.

Prepare material take off, perform technical bid evaluation for electrical equipment offered by vendors, review/check drawings and other relevant documents.

Vendor selections/technical bid evaluations for electrical equipment such as switchgear, power cables, UPS system, distribution boards, grounding systems, approves or makes recommendation for approval.

Coordinates in the evaluation of the design changes in the original scope of work and verifies the implementations of those approved

Conduct inspection in the project site and verify if the implementation of the project if is in accordance with the drawings and specifications.

Control, monitor and coordinates with vendors regarding the delivery of electrical materials.

Perform technical bid evaluations and supervise the work related to power generation, distribution systems including MCCs, Switchgears, package equipment, SCADA,DCS/ESD system, fire and gas systems, transformers, UPS systems, lighting systems, heat tracing system, earthing and lightning systems, CP systems.

Submit weekly and monthly accomplishment report to the client for billing purposes.

August 02, 2004-Nov. 30,2005

Company : Department of Public Works

Project : Substations, Chemical Plant and Infrastructure

Location : Philippines.

Client : Government of the Philippines

Position : Electrical Engineer/Planning Engineer(Dual Functions)

Prepared project electrical feasibilities, proposals, establish cost studies and estimates including man-hours for the whole project for tender purposes and implementations.

Prepare electrical sub-station equipment layout, cable networking lay-out Bill of Quantity, specifications, data sheets, materials requisition and program of works including men–hour's quantities.

Prepare project master schedule plan along with resources allocations.

Evaluate the project bidding submitted by the contractors and submitted to the district engineer for approval.

Evaluate actual accomplishment billed by the contractor and submitted to the district engineer for review and approval.

Prepare correspondents with contractors and report to the district engineer whenever required,prepare commissioning procedures and supervise on site including interfacing with other concern discipline

January 01, 2001 -June 30, 2004

Company : Bayawa EPC Company

Project :Petron Refinery Upgrading Project(Oil and Gas)Client: Petron Philippines and Industrial Substations: Client:Manila Electric Company(MERALCO)

Location :Philippines

Position Held : Electrical Engineer

Prepare electrical equipment lay-out,cable lay-out, lighting layout,grounding & lightning layout,single line diagram, protection diagram, interfacing diagram.

Prepare sizing calculations for cables, transformers, generators, switchgears.

Prepare specifications, data sheets, bill of quantity based on the approved drawings and submit to lead electrical engineer for approval.

Check and evaluate the electrical project installation such as fixing of switchboards, generator sets, transformers, lighting outlets, power outlets, power cables and other related electrical activities if it is conform to the approved drawings and specifications.

Prepare percent accomplishment for billing purpose, variation order any changes during construction and verify to those approved.

Attend meetings and submitted reports to the Project Manager from time to time.

August 03,1998 -Dec. 31, 2000

Company :DENR( Philippine National Oil Company, PNOC)

Project :Oil and Gas and Mining

Location :Republic of the Philippines

Client :Work in Client/Owner Side

Position :Electrical Engineer

Coordinate with the Regional Directors related to electrical technical activities performed in different regions and evaluate all electrical projects if it is in accordance with the requirements.

Prepare electrical design, calculations, specifications, Bill of Quantity and program of works for bidding and budgeting purposes.

Submit report to the Project Director regularly, conduct regular meeting and discuss regarding the actual status of the project.

Participates in the preparation of Capital and Operation budgets for Electrical division.

Participates in the preparation of the regional operating expenditure and maintenance procedure plan.

Review design drawings and calculations submitted by contractor and evaluate progress accomplishment

Review Pre-Commissioning and Commissioning activities/procedures.

Nov. 01,1996- July 31, 1998

Company : Mabuhay Vinyl Corporation(Chemical Plant)

Project :Plant Expansion and Upgrading Project

Location :Republic of the Philippines

Position : Electrical Engineer

Develop electrical networks, inter- connecting diagrams, grounding systems, single line diagrams, cable routings and equipment lay-out.

Supervise maintenance of the plant by implementing the work requests in relation to equipment and personnel resources and availability of spare parts.

Prepare electrical calculations, data sheets, specifications, load schedule, load list, cable schedule and submitted to the senior electrical engineer for review and approval.

Monitor actual status of the on – going project and coordinate with the civil and mechanical engineers in the implementation of the project.

Submit weekly and monthly accomplishment report to the electrical project engineer and attend regular coordination meeting with the other discipline site engineers.

Contact this candidate