Bogdan-George ALEXANDRU

Valea Cucului ***, Prahova county, 107314, Romania

+40-720-***-*** adowq6@r.postjobfree.com

M 02/06/1989 Romanian

WORK EXPERIENCE: Chief Mechanic, Rig mechanic, Maintenance Operator

Rig Mechanic- SAIPEM 12000 offshore, Drillship 23.01.2018 – Present

• Assist in maintaining and repairing mechanical, pneumatic and hydraulic equipment on board the vessel

• Carry out mechanical, pneumatic and hydraulic installation, maintenance and repair in a safe and prudent manner;

Responsible for- TD HPS – 1000T- AC ; TWO TOP DRIVES FOR MAIN AND AUX WELL. Compressor, Hydraulic Power Unit, Hydratong, Elevated Back-Up Tong, Retractable Dolly of Top Drive, Hydraracker Main and Aux well, Fingerboard, Basket Moon Pool, Air winch- Moon Pool, Main Raider, Cranes: Knucle Boom Crane, Riser Gantry Crane, BOP . Cat-walk.

Chief mechanic- Dafora Drilling 12.01.2017 – 18.01.2018

• Diagnose, Maintain and repair Mechanical equipment according to manufacturer and company instructions and specifications and technical data;

• Responsible for: Bentec Euro Rig 5 from 2009 land rig, Cyber chair joystick Top drive TDS-11SA, CAT. 3512 DITA-1200HP engine, 2 -MUD PUMPS EWECO,1-MUD PUMP T-1600Hp Bentec., B.O.P.,Compressors Atlas Copco GA 45-150-P-HAV, Hydraulic unit, lifting equipment to raise and lower rig including winches crown block and cranes, Iron Roughneck ST80, Hydraulic Cathead – Drawworks Bentec 350 ton / 2500 Hp; Man Rider.

• Record keeping of equipment status and input (hours worked, parts replaced where necessary with associated comments and official handovers) to the maintenance program ASIS and Eresman;

• Receive and sort incoming parts and supplies;

• Store items in an orderly and accessible manner in a warehouse, tool room, supply room or other area;

• Process incoming requisitions and issue or distribute parts and supplies for internal usage;

• Maintain records of orders and the amount, kind and location of parts and supplies on hand using manual or computerized inventory system;

• Prepare requisition orders to replenish parts and supplies;

• Manage spare and replacement parts for vehicles, machinery and equipment;

• Advice planners, production personnel or internal users on appropriateness of parts, supplies or materials requested;

Rig Mechanic - OGR recruiter for Transocean Deep Water DDII - offshore 19.12.2014–20.12.2016

• Assist in maintaining and repairing mechanical, pneumatic and hydraulic equipment on board the vessel

• Carry out mechanical, pneumatic and hydraulic installation, maintenance and repair in a safe and prudent manner;

TOP DRIVE HPS – 1000 T (NOV)

Articulated Roughneck ARN 166 Hidralift

Draw works AHD- 500 T (1150

Draw works AHD- 1000 T (2500 HP NOV), Cranes Hidralift 100 tone.

• Perform daily inspections and maintenance on mechanical equipment;

• Maintain and repair mechanical systems and equipment, prime, movers, air and water system, lubrication and fuel system;

• Troubleshoot and repair faulty mechanical, pneumatic and hydraulic equipment and tools;

• Carry out periodic maintenance according to the Rig Maintenance System (RMS) guidelines and coordinate that maintenance with supervisors and other department heads;

• Ensure that requirements concerning regulatory bodies are met in all cases of equipment repair and installation;

• Comply with the permit to work and isolation system;

• Maintain service reports and advise supervisor on condition of equipment and spare parts requirements;

• Perform machine work with lathe, drill press, grinding and surfacing equipment;

• Install, operate, maintain and repair additional or temporary mechanical equipment used for special operations;

• Assist in ensuring that all third-party equipment is fit for purpose, certified, correctly installed and maintained while on the rig.

QHSE:

• Incorporate the THINK planning process into all tasks, whether working alone or as part of a team;

• Participate in START process;

• Call a time Out for Safety (TOFS) whenever an unplanned hazard or a change in the expected results is observed;

• Carry out assigned duties in a safe manner according to company policies and procedures;

• Actively participate in weekly safety meetings and pre-tour meetings are required.

Chief Mechanic

Dafora Drilling – onshore 23.10.2012-01.11.2014

• Diagnose, Maintain and repair Mechanical equipment according to manufacturer and company instructions and specifications and technical data;

• Responsible for: Bentec Euro Rig 5 from 2009 land rig, Cyber chair joystick Top drive TDS-11SA, CAT. 3512 DITA-1200HP engine, 1600hp EWECO MUD PUMP, B.O.P. compressors Atlas Copco GA 45-150-P-HAV, Hydraulic unit, lifting equipment to raise and lower rig including winches crown block and cranes, Iron Roughneck ST80, Hydraulic Cathead – 31.5., Draw works Bentec 350 ton / 2500 Hp;

• Record keeping of equipment status and input (hours worked, parts replaced where necessary with associated comments and official handovers) to the maintenance program ASIS and Eresman;

• Receive and sort incoming parts and supplies;

• Store items in an orderly and accessible manner in a warehouse, tool room, supply room or other area;

• Process incoming requisitions and issue or distribute parts and supplies for internal usage;

• Maintain records of orders and the amount, kind and location of parts and supplies on hand using manual or computerized inventory system;

• Prepare requisition orders to replenish parts and supplies;

• Manage spare and replacement parts for vehicles, machinery and equipment;

• Advice planners, production personnel or internal users on appropriateness of parts, supplies or materials requested;

• Take inventory or examine merchandise to identify items to be reordered or replenished;

• Pack or ship inventory or maintenance and repair parts to destination;

• Compare inbound packing slips or invoices to items actually received to ensure that shipments are correct;

• Requisition merchandise from supplier based on available space, merchandise on hand, or customer demand;

• Receive and fill orders for parts;

• Examine and segregate returned parts for defects, and notify relevant internal department for disposition;

• Servicing, installing, adjusting, modifying and repairing equipment and tolls in the mechanical and engineering workshops;

• Setting up apparatus and teaching aids required by lecturing staff in classrooms and practical areas and advising on their suitability and use;

• Attending to the day to day running of one of the stores;

•Servicing, installing, adjusting, modifying and repairing equipment and tolls in the mechanical and engineering workshops;

• Setting up apparatus and teaching aids required by lecturing staff in classrooms and practical areas and advising on their suitability and use;

• Issuing, equipment, materials, components and other items used by lectures and students and ensuring safe storage of same;

• Recording and tabulating of test data;

• Attending to the day to day running of one of the stores;

• Communicating with suppliers to confirm availability, prices and other materials;

• Receiving and checking items delivered are in good condition and that they agreed with bother order and delivery documentation;

• Maintaining stock levels by consulting with senior staff and raising Purchase Requests as required;

• Assisting with periodic stock audits;

• Preparing and awaiting materials to workshop use;

• Ensuring compliance with all current Health and Safety legislation, including COSHH. This will involve regular checking of equipment, ensuring that chemicals and radioactive sources, if used, are handled, stored and disposed of safely and correctly. In general, ensuring that safe working practices are adopted and that all equipment is operated safely and records maintained.

EDUCATION AND TRAINING

Master degree: Oil Extraction/ Petroleum-Gas University of Ploiesti/ 2012-2014

Faculty degree: Oilfield Equipment for Drilling / Petroleum-Gas University of Ploiesti/ 2008-2012

PERSONAL SKILLS

Excellent communication skills in Romanian and English

Persistent, positive attitude, result oriented, empathic, organized, looking for professional perfection, responsible with a natural leadership ability, currently responsible for a team of 4 people

Job-related skills: good command of quality control processes (currently responsible for quality audit)

Language(s) UNDERSTANDING SPEAKING WRITING

Listening Reading Spoken interaction Spoken production

English B2 B2 B2 B2

French A1 A1 A1 A1

Levels: A1/A2: Basic user - B1/B2: Independent user - C1/C2 Proficient user

Driving license: B, BE, C, CE

Certified: BOSIET / Mechanical Engineer/ H2S certified

References: adowq6@r.postjobfree.com - SDSV

adowq6@r.postjobfree.com - SDSV

adowq6@r.postjobfree.com - Superintendent

Contact this candidate