Cnc Machinist

Resume

SANJJEV SINGH

Mobile No:+971*********,+971*********

Email:*************@*****.***

Applying For The Post Of CNC Machinist(Lathe)

Name Sanjeev Singh

Date of birth 25.03.1992

Present location India

Qualification Diploma in CNC

Present designation CNC Turning Operator setter, programmer Location preference Any where

Functional area Machine shop oil and gas

Name of present employer Trinity Mechanical Services, Dubai Present industry type Oil and gas field equipments

CAREER OBJECTIVE

To maintain and improve my clarity, determination, conficance, integrity and zeal to reach the Zenith ofmy efficiency while performing any job in an Organization. A Suitable position with an organization where I can utilize the best of my skills and abilities that fit to my education, skills and experience a place where an encourage and permitted to be an active participant as well vital contribute on development of the company.

HIGHER QUALIFCATION

10th pass 2006 B.S.E.B, PTANA

12th pass 2013 B.I.E.C,PTANA(math)

Diploma in CNC

COMPUTER SKILL

CNC PROGRAMMING

TOTAL PERIOD OF EXPERIENCE:- 10 years

JOB EXPOSURES:-

Experience in the field of CNC Turning machining/Machine.Exposure in CNC operation. Well Knowledge in Normally 100mm to 3000Length Work. & operation like OD turning, ID turning, threading pin connection and box connection API connection API groove NOIHT thred, am mt thred 1.knowledge of all type of thred and calculation API. BUTTRESS. ACME. STC. LTC. BTC.

ALL API THRED AND RING GROVE,thred blund

using measuring instruments:-

Measuring

instrument

mitutoyo

Measuring

instrument

mitutoyo

Gaugemakar

threading Instrument

gauge

Measuring tape Depth vernier MRP gauge&standard rod plen vernier Digital depth vernier Ex.In. Pitch diameter gauge Digital vernier Hight gauges Ex.In. thread Roller gauge Out side micrometer Provil novo putty Thread form profil gauge Digital micrometer Surface finish tester Thread hight gauge Bled micrometer Wall thikness tester Api seal ring groove gauge In side micrometer Slip gaugs Contact pins

Bore gauge Wire Threading chart

Hole tester gauges Slip gauge satnd

Using machine, controller& machine tool:-

Machine Controller Inserts

Samsung 2000+ Fanuc DNMG, CNMG, WNMG

Dugard Fanuc VBMT, VNMG, CCGT

Samsung PL 35 Fanuc with steady rets VCGT, CCMT, TNMG Yugi Fanuc with steady rets Threading inserts

Puma Fanuc Wiper inserts

Top turn Fanuc with steady rets CBN inserts

Hwacheon 550 Fanuc with steady rets Groove inserts Hwacheon 700BB Fanuc with steady rets HHS,Ceramic

Hwacheon 850 BB+ Fanuc with steady rets Parting inserts

Using machining tools,bar &heads:-

OD turning tool:- DNMG, CNMG, WNMG, VNMG, VBMT& 117 degree tool special tool, nutral tool., of25 25, 32 32 size tool holder etc.

ID turning boring bars& heads :- DNMG, CNMG, VNMG,VBMT, CCMT, & nutral head using 3mm micron boring, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 60mm, 80mm& 100mm boring bar solid bar and anty vibration ( silent bar) also using carbide boring baretc.

Internal external threading tools and bar:- micron threading bar, different type threading insert tools, threading heads & different type threading inserts size type bar etc.

JOB PROFILE:-

Complete inspection of machining item at floor shop after machining by various types of Go and NO Go gauges.

Demonstrates a strong understanding of machining processes.

Be competent in reading and understanding part drawings and technical documents, such as quality control plans, specifications and tolerances.

Will maintain specifications by demonstrating a solid ability to read and understand all common gauges and measurement tools used in the industry.

Must demonstrate knowledge of machine and tool offset usage, understand tool setting registers, offset and tool wear screens.

Must be able to set-up required cutting tools correctly into machine and establish tool offsets.

Must be able to correctly prepare machine table/chuck to include proper boring of jaws and loading part programs into machines.

Must be able to read and understand CNC G-code programs.

Must effectively be able to dry-run or safety run part programs to verify locations and tool touch-offs are entered correctly, without causing scrap during set-ups.

Perform all secondary operations, part deburring, part handling methods to prevent damage of finished goods.

To measure, examine and test completed units in order to detect defects and ensure conformance to specifications, using precision instruments such as micrometers, vernier, calipers etc

Monitor the feed and speed of machines during the machining process.

Align and secure holding fixtures, cutting tools, attachments, accessories and materials onto machines.

Read and operate measuring instruments

Perform additional duties as needed

To check the all lubrication point: - To oil if required condition and requirement grease in our machine.

To inspect all the foundation and loose Nuts, Bolts, Oil hoses, Coupling, Connection drives oiling and greasing done where necessary hands on experience in mainte

Knowledge of all type of thread and calculations Api, Buttress,Acme, ltc, stc, npt, (6A,5B,5CT,7-17- 2,8C,16A & 16C)

All API thread and ring groove

Select the appropriate tools, machines, and materials to be used in preparation of machinery work.

Monitor the feed and speed of machines during the machining process.

Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.

Clean and lubricate machines, tools, and equipment to remove grease, rust, stains, and foreign matter.

Fit and assemble parts to make or repair machine tools.

Operate equipment to verify operational efficiency.

Maintaining quality and safety standards.

PRESENT ORGANIZATION PROFILE:-

Presently Working as a CNC turning Operator Setter cum programmer with Trinity Mechanical Service LLC Dubai from dec.2016 totill date. Offers repairing, reconditioning & manufacturing of mechanical components for industry sectors ranging from oil & gas, marine, dredging, power, transportation & construction among others. Equipped with conventional, CNC& milling machinery and a dedicated welding and fabrication yard. ISO 9001:2008,ISO 14001:2004,OHSAS 18001:2007,

(www.trinityholdings.com)

PRESNOL DETAILS:-

Name : SANJEEV SINGH

Fathers name : Laxmikant singh

Nationality : Indian

Date of Birth : 25/03/1992

Gender : Male

Marital Status : Married

Religion : Hindu

Language Known : English,hindi

PASSPORT DETAILS:-

Passport No. : V7739335

Date of Issue : 29/05/2021

Date of Expiry : 28/05/2031

Place of Issue Ptana India,

Visa Status : Employment

DECLARATION:-

I hereby certify that the above information are true and correct according to the best of my knowledge & My Experience. If selected I assure that I would perform to the best of my abilities, early awaiting a Positive response

SANJEEV SINGH

Contact this candidate