Thivagar.r
E-mail : ador3d@r.postjobfree.com
GSM : +968-********
Skype: Thivagar.srk
An enthusiastic Engineer aspires to establish a career in a growth oriented organization to utilize acquired skills and knowledge in achieving organizational goals, while attaining personal and professional growth.
Professional synopsis:
Qualification: Bachelor of Engineering in Electronics & Communication Engineering.
Total Experience: 10 years
Employment history
Key Work Experience:
Having more than 10 years of professional experience in India and Middle East. Installation, testing and commissioning of various Instrument and process facilities, calibration of level, pressure gauges, transmitters, control valves etc.
Experienced with execution, maintenance and quality control activities involved in installation and commissioning of various Instrumentation works such as Oil& Gas Process Equipment’s,
Control and Automation systems, instrument panels, control, signal cables, for various process plants.
Employers Details:
NOV 2017 - till Date : ZAWAWI Powertech Engineering LLC, Oman Q.C Inspector – Electrical & Instrument
DEC 2016 – MAR 2017 : Descon Engineering Qatar L.L.C, Qatar QC Inspector - Electrical & Instrument
JUN 2015 – NOV 2016 : Intel communication Cabling, INDIA QC Inspector - Electrical & Instrument
APR 2013 – APR 2015 : United Engineering Projects Company, LLC, Oman QC Inspector - Electrical & Instrument
JUN 2011 – MAR 2013 : CROWN SOLUTIONS LIMITED,INDIA Facilities Management engineer
ACTIVITIES IN BRIEF
Ensure equipment works complied with project’s functional specification company procedures, method statements and control documentation.
Conduct final acceptance test for various electrical and instrumentation system and devices.
Coordinate to client for engineering matters such as problem that encounters at site additional works and other comments as per client requirements
Carry out vendor inspections for erection & construction of various equipment/ instruments related to oil & gas sectors and general engineering purposes.
Attend pre-inspection meeting on behalf of client, review of vendor inspection documents / procedures and verifying the same is in line with client’s project specification.
Monitor electrical and instrument performance based on project specification and international standards.
Review data sheets and certificates to make sure that the same is in line with project specification and standards.
Ensure company’s document quality system and project quality plan is implemented.
Witness the material for quantity take off with the reference of delivery note, purchase order, packing list
Review of commissioning dossier for different system.
EXPERIENCE IN DETAIL:
Organization : ZAWAWI POWERTECH ENGINEERING LLC,
Client : OMAN ELECTRICITY TRANSMISSION COMPANY,OMAN
Position : Q.C Inspector Electrical & Instrumentation
Duration : Nov 2017 to till date
Roles & Responsibilities:
Preparations of RFI schedule having official attachments forwarded to clients for review and final inspections.
Weekly surveillance with the client and closing the punch items.
Witnessing the inspection of installation of cable trays/ladders in the hook up and the expansion joints.
Periodic inspection of cable installation routes, cable identification and cable support systems prior to cable run.
Witnessing the Installation of Distribution panels, Main distribution board (MDB) provided for site facilities.
Coordinating with Subcontractor for the inspections in LER and HVAC.
Performing the material inspection of all instruments & verification of all instruments as per instrument material package list & summary.
Responsible for conducting surveillance and inspection duties for work defined here in and efficient recording and reporting of the results as required.
Witness for the inspection of installation as per (ITP) / any damage of Instruments, Conduits and fittings (above and below ground), Cable trays/ladder racks and trenching, hook up expansion joints, Junction Boxes, Control Panels, Consoles, wiring termination, field Instrument,impulse tubing and F&G as per the project specification.
Witnessing the Inspection for the process tubing leak test and check that the tubing is done as per the hook up diagram and confirms to the project specification.
Performs Continuity and insulation test for HV, MV and LV cables
Witness for OTDR test for fibre optic cable after splicing and termination.
Monitor Contractor to ensure resolution of DR/NCR in a timely manner.
Visual Inspection of field installed instruments and Spec check of all mounted instruments like transmitter, valves, PRV’s, PSV’s, gauges, temperature elements etc according to project standards and specifications.
Organization : Descon Engineering Qatar LLC.
Client : Qatar chemical company (Q-Chem I & II)
Position : Q.C Inspector Electrical & Instrumentation
Duration : Dec 2016 to Mar 2017
Responsibilities:
Terminations that include Power and Control and Signal cables E & I Loop Checking, Field Instrument, Marshalling cabinet, System cabinet and to ensure that the installation is complying base with design general specification, International standard, approved for construction drawing, ITP, QCP
Erection, Installation, Testing and Commissioning of 33KV/11KV/6.6KV/400V substations, Transformer Switchgear, LV / HV Motors with associated field equipment’s and Start-up assistance with shut down jobs.
Adherence to Electrical Hazardous Zone certification installation methods in particular to Overhead Crane complying Ex Standards and complying all safety procedure.
Co-ordination with construction and commissioning team and assist them whenever required.
QA / QC Inspection for Electrical activities. Responsible for the inspection of Electrical works as per QA/QC inspection and test plan, IFC Drawings, Project Specification & Vendor Instruction & Test Procedures.
Inspection of Power transformers, Switch gears, HV&LV Motors, HV&LV Cables laying and Glanding & Termination, Lighting DB’S, Plant Light Fixtures, Earthing system and Electric Heat Tracing, etc.,
Preparing the Inspection & Test Plans (ITP), Procedures, Method Statements by refer to specification..
Preparation of Request for Inspections (RFI), Inspection Reports & data sheets, check sheets for various Electrical works and incoming materials.
Implementation of project Quality Plan for the Electrical activities & project specific Procedures.
Responsible for the Electrical system implements suitable quality systems & that Inspection and test plan are implemented.
Organization : Intel communication cabling, India.
Position : Q.C Inspector Electrical & Instrumentation
Duration : June 2015 to Nov2016
Responsibilities:
Perform ongoing construction activities, inspects E&I system as per inspection and test plan, project specification.
Inspection of cable trays, conduits power and control cabinets, DCS, ESD, LCP, UPS MCC power distribution box and package instruments. Testing and witnessing of various instruments bench calibration, control valve stroke choking, cable insulation test, loop check, impulse line & air header line leak test etc.
Reviewed the loop package, field verification and witness the loop commissioning as per datasheets and specification sheets.
Preparation of punch list items and ensure that the subcontractor’s performer PMCC coordination of client
QA / QC Inspection for Electrical activities. Responsible for the inspection of Electrical works as per QA/QC inspection and test plan, IFC Drawings, Project Specification & Vendor Instruction & Test Procedures.
Inspection of Power transformers, Switch gears, HV&LV Motors, HV&LV Cables laying and Glanding & Termination, Lighting DB’S, Plant Light Fixtures, Earthing system and Electric Heat Tracing, etc.,
Organization : United Engineering Projects Company, LLC, Oman.
Client : OXY-Mukhaizna LLC, Oman.
Position : Q.C Inspector Electrical & Instrumentation
Duration : Apr 2013 to Apr 2015.
Responsibilities:
Witnessed Commissioning of Different electrical equipment’s as Function as Simulation test of different controller that include DCS, LCS, ESD (Start/Stop/Permissive/Alarm & Trip) with Instrumentation interface.
Installation of various electrical work like Cable laying, Glanding termination, cable tray, grounding work, switch gear, Panel, lightening panel, cable bus duct, conduit etc.
Installation and testing of transformer, LV and MV motor, earthing system and lighting system.
Hand on experience to operate safely all types of measuring instrument and testing equipments.
Supervision and execution of all electrical activities related to installation commissioning like cable laying, glanding, termination, cable jointing, I.R testing, Hi-potential test,fault finding, and No load test of motor etc.
Installation and maintenance of all types of AC/DC, Motors and Generators as per manufacture manuals.
Manage inspection activities at site as per approved ITP & Method statement and AFC drawings.
Maintain of all latest quality documents (CQP/QCP/ITP/MS) and Project drawing control resister etc.
Carrying out inspection and preparing the inspection reports and mark-up for as built as required.
Ensuring that all the measuring & Monitoring equipment are having valid calibration maintaining log.
Identifying and reporting the non-conformance / Defect during construction work and documentation.
Ensuring all the quality records are reviewed of completion of site/project and Preparation of As-built mark-up drawing, punch list and Test pack and get approval by client or main contractor.
Maintain engineering standards & form, Co-ordinate testing commissioning and site construction job
Installation of pilot devices as pressure switch, float switch, flow meter, limit switch and power electronics etc.
Power and Control Terminal Tightness with Schematic & interconnection wiring drawings.
Mechanically Operation of Breakers, Winding Resistance, Auto and momentary bus change over scheme
Paralleling/Synchronisation of Transformer & alternator, Motor connection type like Star or Delta, Full load Current, KW, DOR of Motors, Temperature & Vibration of Motor Bearing DE & NDE, Ear thing protection, Motor RPM, Sound Level, Checking of all Testing parameters, relay Configuration and logics.
Attending regular progress meeting with client and consultant at their respective offices as well as at site.
Organization : Crown Solutions LTD, Chennai-97
Position : Facilities Management engineer
Duration : Jun 2011 to Mar 2013
Responsibilities:
Attending day to day calls logged in ticketing tool and closing the same by visit as per SLA.
Application installation and troubleshooting as per company standard for security systems
Supervised crew members as per work
Material and vehicle arrangements
Monitoring the security devices and doors access
Providing the door access for user as per user request
Network door access configuration in floors
Coordinating with software team for software related issues
Coordinating with Central network and server team for network and server related issues
Maintaining the ADMIN and USB access revoke
Switch port Enable and Disable for (Data & Voice)
Industrial trainings & achievements
NEBOSH IGC course has been completed.
HES Induction Course from Occidental Mukhaizna LLC, Oman.
H2S Awareness and Escape safety course.
Permit to Work Applicant from OXY.
Gas monitoring / Gas tester course from OTI.
Health Safety & Environmental (HSE) Training Including Fire Fighting.
Software's known: MS Office, Windows XP & 7.
QA/QC Electrical certification has been completed
CONVERSANT WITH:
Instrumentation Layout Drawings
P&I Drawings
Instrument Index
Instrument Hook-Up Drawings
Instrument Installation Standard Details
Loop Index of instrument
Instrument loop Diagram
Cable Schedule & Termination Drawings
Cable Tray/Conduit, Trench and Duct Layout Drawings
Digital Circuit Design
Single line Diagram
Personal Particulars
Permanent Address: 3/303, Cholannagar, Ammachatiram
Kumbakonam–612001
Date of Birth : 06 FEB 1988
Sex : Male
Marital Status : Married
Languages Known : English, Hindi and Tamil
Passport No : U0099369