Stationary Engineer Center Central

OVERVIEW

Experienced and skilled Stationary Engineer with extensive working knowledge in the safe and efficient operations, shutsdown and repair of steam boiler plants supplying either saturated or superheated steam as per ASME Code requirements. Safety Controls augment these boilers operating pressure/temperature parameters for efficient and safe and reliable operations. These boilers can also be used to supply steam or hot water for cooling/heating applications in a absorption machines. These steam boiler components and their auxiliaries, incorporates provisions for raw water softeners/filters,water treatment chemicals(for tube corrosion preventions), economizers,daerators, condensate feed water systems/feed pumps, cooling condensers,and other balance of equipments as required for these boiler installations. Communication protocols for Modbus or ASHRAE BacNet and other Building Automation Systems is included in these boilers system as an option.

WORK EXPERIENCES:

Plant Maintenance Engineer

ANGELICA CORPORATION

Linen Supply Services Plant No. 16

04/30/2018-07/2018

451 N.San Fernando Road Los Angeles California Tel. No.323-***-****,CA 90031, Mechanical Dept.Head-Steve Blackwell.

Primary function as boiler maintenance stationary engineer handling the daily operation of the laundry/linen processing plant shall consist of the following:

Starts,operates,maintain and shutsdown as per schedules, two C. Brooks firetube gas fired boilers (150 psi,400HP,3phase 460vac, one duty and one standby), including its power and control wirings supplying saturated steam to equipments in the production department.

Starts,operates,maintain,repairs,and shutsdown as per schedule, its various treated water plant,compressed air plant, water softener treatment plant, exhaust/ventilation fans, tunnel washers,dryers, ironers/folders, stackers,and other machineries/equipments to support laundry processing plant operations.

Maintains and ensure boiler water quality(pH,conductivity,tds,alkalinity,hardness,concentration) and treatment are good to avoid boiler tube corrosion problems and assuring continuous operation and productivity.(Alkalinity as per P and M indicators used in titration).

Monitors closely boilers pressure conditions to determine actual equipment operating conditions required.

Ensure boilers are properly gas- purged and vented,and emission properly monitored, for smooth operational function and operability.

Proper blowdown at the end of every shift should be done to protect the boiler tubes from inherent corrosion problems.

Attends to various plant machine maintenance and service calls of the production department.

Ensures all safety codes(LogOut and TagOut) and company policies are followed always in the daily operation of the laundry service processing plant.

Coordinates job schedules and work orders as needed to ensure continuous operations of the facility.

Attends meeting to further discussed plan of actions and enhance operation capability.

Handles other functions as maybe further assigned by Chief Engineer.

A complete record and logs of all operations,maintenance and shutsdown activities per every shift shall be maintained at all times to maximized equipment operability and capability.

Maintenance Distributor/Technician

SODEXO Laundry/Linen Dept.

757 Westwood Plaza Rm.B309

LA CA 90095 . Tel.No.310-***-*****

4/9/2015 to 5/28/2017, Dept. Manager: Norma De JESUS

Handles linen/laundry equipment operation/maintenance/troubleshooting /repair and services work at the UCLA Ronald Reagan Medical Center for the dispensing machines.

Assists in the inventories,distribution,stockings and deliveries of linen and laundry materials at the Medical Center.

Coordinates material deliveries of laundry/linen plant to various company distribution sites.

Arranges for steam plant rewashing/resupply,repair of collected soiled laundry/linen materials .

Performs other functions as maybe further assigned by the department manager as required.

Attends coordination meetings and seminars to augment capabilities required.

Trains subordinates as required to enhance working capabilities as needed.

Coordinates work schedules to be able to properly manage work efficiently.

Worked as substitute in an emergency requirement as dictated by the Department Manager.

Computer assisted works for stocks inventories,distribution stocks and other linen/laundry deliveries as required in some areas of the Ronald Regan Medical Center facilities.

HVAC/Refrigeration Maintenance Engineer

LH & MH Engineering PTE LTD

10/04/2002– 01/10/2004 Singapore Blk 25 Tuas Ave. Singapore 638991,Tel. No.65-899-7879 Mechanical Dept. Manager:Norman NG.

Managed/supervised the installations/testing/commissioning and project handover of the central air handling units,air distribution

ductworks,centrifugal water chillers/sea cooled condensers,chemical water treatment,control valves and associated pipings,power and control wirings for the Conoco Oil gas/power production platform.

Prepares daily project manpower and equipment schedules,job site work permits,and attends daily progress/coordination meetings with clients and subcontractors.

Handles the preparation of completed jobs for inspection and approval.

Monitors daily project progress as well personnel quality of workmanship to ensure conformance to project specifications and schedules.

Periodically updates Project Manager of all ongoing project status and submit reports for documentation and record.

Trains client's personnel in handling the operation,maintenance/service of completed and handed over projects.

Assists other engineers in the preparation of as-built plans and drawings,operation and maintenance and service manuals,

approve test and job inspection certificates and other handover documents for submission to the owner or client.

Reports to main office to assist other engineers in the preparation of project bid submittals and documentations packages.

Attends Sea and Shipyard Safety Training/Seminars on OSHA/NFPA/SOLAS and conducts meeting with subordinates to discuss safety concerns(Log Out/TagOut), trains subordinates and implement safety procedures for the project.

Perform other related functions as directed by the Project Manager.

HVAC/Refrigeration Engineer

NISEI Refrigeration & Airconitioning Co.

01/10/1997-12/01/1998 Tel No. 213-***-**** 1611 Hanging Rock Montebello, CA 90540 USA.Mechanical Dept.Manager:Ted Kazaki.

Handled the installation, maintenance and service work of Package rooftop/split type heatpump ducted HVAC units for residential homes, commercial banks and industrial facilities.installed wall gravity type heaters and furnaces for private

homes/residences and installed wall terminal heat/cool packaged units for school classrooms.

Performed the installation,testing and commissioning of Dunham Bush modular type cold storage refrigeration units with

two tier type condensing units.installed,maintained and serviced deli cooler for dairy and food store.

Troubleshoots,analyzes,HVAC/Refrigeration control system problems and modify/adjust or repair system to improve operational reliability.

Performs routine maintenance or service works such as compressor/compressor capacitor/fan motor/fan capacitor/fan bearing replacement or lubrication/air filter change/thermostat replacement/ignition module pilot replacement/condenser

& evaporator coil cleaning/fan belt replacement and motor alignment/heating furnace combustion chamber cleaning/refrigerant

piping leak repair/refrigerant charging and adjustment/compressor oil charging or replacement/compressor vibration mount

change/expansion valve replacement/ liquid solenoid valve coil change and other works as needed.

Prepares and submit maintenance and repair/service billing charge to clients and reports same to Manager/owner for record

and documentation.Maintain shop tools,equipment in good working condition and checks and updates inventory of materials

and supplies to ensure immediate availability for project usage.

Performs maintenance and repair works on evaporative type cooling towers/condensers,checks and analyzes cooling tower

water chemistry,treats the water as needed to minimize scaling conditions of the cooling tower/condenser tubes and improves

operational performance of the system.

Checks the condition of float valves,pipings,circulating pumps,fans/motor,vibration

mounts,rectifies or replaces it as needed.

Performs other job function as maybe further assigned by Manager/owner.

Mechanical Project Engineer(Asst. Proj. Manager)

AL Kurdi Trading and Contracting Company(Al Muhandis Consulting Engineers) Division

09/23/1983-06/27/1995 PO Box No.43379 Riyadh 11561,Kingdom of Saudi Arabia Tel.No.4761918,Dept. Project Manager:Ahmed Ali Machlab.

Assists the Department Manager in the preparation of project bid proposal,submittals and documentations for the

acquisition of new projects for private clients and ministries.

Prepares approved construction schedules, plans and specifications for project including manpower,equipments and materials mobilization and deployment.

Assists the Department Manager in the management and supervision of all on going projects activities.

Provides the Department Manager with the daily project progress status report,project cost variance report,manpower/

equipment and material schedules including the project budgetary requirements.

Utilizes the company's dealership/agentship or partnership with various equipments manufacturers and suppliers in promoting and applying their products and services to the various company projects to expand the company's overreach

in the project's outsourcing and implementation activities.

Manages project site engineers,supervisors and handles meeting with subcontractors to provide oversight on outsource project activities to ensure compliance with project target schedules and client requirements.

Monitors project site startup testing and commissioning activities to ensure all works are done in accordance with the project

specifications and quality standard of workmanship.

Coordinates with clients for the final handover of the project.Prepares and submits project as-built drawings/plans,ope

and maintenance/service manuals,approved test and balancing commissioning certificates and other project completion

and handover documents.

Trains/orients the company Operation and Maintenance Department engineers/operators and technicians in handling the

operation/maintenance and service works of completed and handed-over projects to comply with the company's

build-operate-maintain contractual obligation to clients.

Performs other related functions and duties as maybe further assigned by the Department Manager.

Mechanical Engineer

US Naval Base Public Works Center Subic Bay (Production-Engineering Department), Code424

08/04/1982-09/21/1983 Subic Bay,Zambales, Philippines .Mechanical Engineering Director:Ken Leonard.

Colloborates and assist other engineering trades in the preparation and production of construction plans and specifications and other projects documentations.

Prepares equipment sizing and selection, design check calculations, load calculations and analysis of mechanical,electrical systems, plants/equipments based on applicable and recognized Standards as ASHRAE/ARI/ASME/NEC and other Federal/DoD guide specifications.

Modifies existing plans to reflect to as-built conditions as required by project specifications.

Reviews,analyzes contractors design proposals/submittals for new or existing project. Implements and provide comments, recommendations as required in accordance to project criteria specifications .

Performs actual site surveys and verifications to ensure accurate assessment of field datas.

Monitors field project activities to ensure compliance to project plans,specifications and schedules and to ensure activities are implemented in accordance to quality standards of workmanship.

Prepares project status and progress reports of handled projects.

Performs other functions as directed by the Engineering Department Director, Public Works Center(PWC Code 420).

Engineering Equipment Incorporated (EEI) Engineering Department(Foundry Division)

06/05/1979-08/02/1982 Mandaluyong,Manila, Philippines Tel. No.632-***-****, Mechanical Department Head/Group Supvr: Danilo N.Plata/Manuel Cabrera.

Reviews and checks client’s drawings and product specification requirements.

Prepares cost estimate of products as per customer’s engineering specifications.

Coordinates with engineering drafting department in the preparation of design and production drawings.

Coordinates with marketing department on other customer’s requirements.

Performs on-site visit to verify and take precise measurements, ensuring products are manufactured in accordance to customers requirement and specifications.

Coordinates with other trades of the division to sort out loopholes and other production problems anticipated to ensure compliances to required specifications.

Mechanical Design Engineer

Other Skills:

Computer literate,Microsoft Word,Excel applications.

Excellent verbal and written communication skills.

Excellent organizational and leadership skills

Excellent troubleshooting skills.

Education/Qualifications

B.S.Mechanical Engineering B.S.M.E.,Graduate,1978 at the Mapua Institute of Technology, Muralla Intramuros, Manila,Philippines.

B.S.Electronics and Communication Engineering,(undergrad),2000-2003 at Central Colleges of the Philippines

Manila,Philippines.

Steam Plant Operation and Maintenance 2, Los Angeles Technical Trade College(LATTC) Fall 2014,09/01/2014-12/14/2015.

Los Angeles,California.

License/Certification:

Unlimited Steam Engineer License, License No.PO34379 expires 09/16/2022- Issued by: City of Los Angeles Department of Building and Safety.

Universal Airconditioning/Refrigeration Technician-License No.2139143 -Issued 12/17/1998 by ARI/EPA

Mechanical Engineer License -License No. 20147 dated 2/9/1981 issued by Philippines Professional Regulation Commission.

ORGANIZATIONAL MEMBERSHIP

American Society of Heating Refrigerating and Airconditioning Engineers,ASHRAE member.

PERSONAL JOB REFERENCES:

Steve Blackwell-Maintenance Manager @Angelica Corporation Telephone No.323-***-****

George Mendoza-Boiler Mechanic @Angelica Corporation 451 San Fernandp Road Los Angeles California Telephone No.323-***-****

Norma De Jesus -Dept. Manager at Sodexo/UCLA Medical Center 757 Westwood Plaza Rm B309 LA CA 90095 Telephone No.310-***-****,310-***-**** email:*****.*******@******.***

Edwin Guillo-Supervisor @Sodexo/UCLA Telephone No.310-***-****.

Engr. Patrick A. BRADY- instructor LATTC (Los Angeles Technical Trade College) 400 W.Washington Blvd. Los Angeles CA 90015 Mobile-1-323-***-**** email:*******@*****.***

Engr.Juan Andres– Stationary Plant Engr. LAC-USC Medical Center Central Plant

Mobile-1-323-***-**** 1635 Marengo St.Los Angeles Ca 90033,email:*******@***.********.***.***

Engr.William Valimento-Building Site Inspector-Los Angeles County Dept.of Water and Power.

Mobile-818-***-****

Contact this candidate