CURRICULUM VITAE
NAME : POORNACHANDRA GRADUATED IN :DME (R/AC) DOMAIN : HVAC TECHNICIAN
EMAIL : adomaf@r.postjobfree.com
PHONE : +919*********, 728-***-****
CARRIER OBJECTIVE:
Challenging position as a Hvac technician in reputed organization where my skills and experience in developing in utilize in renowned organization.
Core Competencies:
Comply to safety, quality and environmental requirements.
Deploys maintenance program such as preventive maintenance, corrective maintenance, worker job level structure, manpower utilization and construction equipment required.
Carries out PPM for rotary equipment, including of monitoring various parameter and
carrying out visual check and provides feedback through reports.
Troubleshooting centrifugal, reciprocating pumps and compressor, and blowers.
Carries out corrective maintenance which includes assemble / dismantle the pumps and compressor, bearings and seal renewal and alignment correction.
Responsible for managing correct maintenance, installation and repair all mechanical
equipment’s.
Ensure clearance tolerance within capable limit using precision instruments such as vernier caliper, micrometer, feeler gauge, dial gauge, bore gauge.
Reciprocating Compressor:
Both suction valves loader and discharge valves from head, remove valves head. open all inspection door provided and loose the nut connects the cross head and piston rod.
Dismantle piston rings, plates, expander rings, wear band, and rod cylinder house with
crank case with distance piece.
Changing new one instead of damage parts, when assembling the following factors should be consider are main bearing thrust and radial clearance, connecting rod big end and small end pin clearance, rod run out, piston plate clearance, cylinder bore, bore surface clearance, piston end side clearance, oil tube condition, wiper packing clearance, free rotating and alignment.
Centrifugal Compressor:
Check the thrust clearance of the compressor shaft with thrust bearings head should be check that all oil line are dismantle.
Bearing housing cover and take care cover gasket for maintaining thrust bearings and thrust disc by removing of locknut, split journal bearing two side and mark which side is coming
Check the rotary any damage and check the wear rings clearance, rotary balancing and run out.
Assembling is the reverse procedure of dismantling following factor should be consider while and before assembling the rotor and run out.
Check the inter stage labyrinth clearance, check the seals are properly seated, bearinds clearance thrust and radial.
Pumps:
Servicing or centrifugal pump both horizontal and vertical mounted for seal leak, low fow rate and vibration
Alignment of pumps and prime mover both axial and radial
Replacing mechanical seal for pump cartridge type single and double seal, pusher and non-pusher seal.
Servicing of gear box (spur and worm) of various fan and blower.
Bearing, coupling replacement
Blade angle and bearing inspection and replacement.
Experiencein GCC2012-2014
Two Years Experience As HVAC Technician Proscape LLC Dubai From April 2012 To 2014.
Responsibilitys as HVAC Technician handling window split package and FCU AHU Water Cooled and Air Cooled Chillers Priventive Maintenance.
Experience in GCC 2014 - 2016
Worked as a HVAC TECHNICIAN IMDDAD LLC ( DUBAI INTERNATIONAL AIRPORT)
MY ROLES AND RESPONSIBILITIES IN HVAC MAINTENANCE:
Maintaining of HVAC system of power station
Overhauling of compressors, pumps.
Preparation of yearly maintenance schedule, monthly schedule, and yearly invoices.
Preparation of work orders, MPA’s quotations.
Preparation of planned preventive maintenance of monthly, yearly.
Ordering and inspection of spare parts.
Maintaining and repairing of centrifugal pumps.
Scan - tested HEPA filters at specified flow rate.
Dismantled the units, repaired broken components, and restored them in operating condition.
Tested, troubleshot, and repaired systems by identifying malfunctions and replacing parts and components. Read diagrams, specifications, drawings, blueprints, and schematics.
Collaborated with licensed contractors on installation and repair services for complex building maintenance projects.
Work experienced in dx centralized system.
MY ROLES AND RESPONSIBILITIES IN HVAC SITE TECHNICIAN
Plant room operation and maintenance. quantity take off %& procurements – involved in quantity procurements for c.s pipes, Fitting etc for process plant building services.
Full incharge for installation chilled water piping for building services HVAC system.
Technician the erection of G.I ducting AHUs, FAHUs, FCUs and make up air fans with accessories like (motorized volume control damper, fire dampers) fire rated
M.S ducting for kitchen extracts.
Technician the water and air balancing HVAC system.
Providing drawing and information to contractors and site personnel.
Site co-ordinates of other services.
Checking and certified bills of contractors.
Maintenance of HVAC system & trouble shooting.
PROJECT HANDLED (ON SITE): From 2016 to 2018
Working As Chennai Petrolium Corporation - Bridge And Co.(India )Ltd Working As Under Contractor Chiller And Trobule Shootings Work As In My Job Role Operation . - 475 TR chiller Tonnage Preventive Maintinance
PAST EXPERIENCE:
Two Years Experience As HVAC Technician Proscape LLC Dubai From April 2012 To 2014.
One Year Experience As a Service Engineer in Voltas April 2010 To 2012
Collaborated with licensed contractors on installation and repair services for complex building maintenance projects.
Work experienced in dx centralized system.
MY ROLES AND RESPONSIBILITIES IN HVAC SITE TECHNICIAN
Plant room operation and maintenance. quantity take off %& procurements – involved in quantity procurements for c.s pipes, Fitting etc for process plant building services.
Full incharge for installation chilled water piping for building services HVAC system.
Technician the erection of G.I ducting AHUs, FAHUs, FCUs and make up air fans with accessories like (motorized volume control damper, fire dampers) fire rated
M.S ducting for kitchen extracts.
Technician the water and air balancing HVAC system.
Providing drawing and information to contractors and site personnel.
Site co-ordinates of other services.
Checking and certified bills of contractors.
Maintenance of HVAC system & trouble shooting.
PROJECT HANDLED (ON SITE): From 2016 to 2020
Working As Chennai Petrolium Corporation - Bridge And Co.(India )Ltd Working As Under Contractor Chiller And Trobule Shootings Work As In My Job Role Operation . - 475 TR chiller Tonnage Preventive Maintinance
PROJECT MAINTANENCE From 2020 to 2021
Working As Apollo Tyres Pvltd (India) Working as Under Contract Chillers 900tr York 4 Chillers Air Cooled Chillers 500tr atlascope Air Compressor 4, 6, 8 Bar Priventive Maintinence and Trobule Shootings Operations And Cooling Towers.
ROLES AND RESPONSIBILITIES IN DESIGN
We take the diagram from the architect & first we prepare the heat load calculation for each floor/area.
Based on CFMs as per consultant/client requirements we select Grills/ Diffusers then distributing the cfm.
Design the duct routing and preparing the section drawings
Preparing the chiller plant room with sectional details
As per site condition we have to prepare the chiller and pump location.
We have to prepare chilled water pipe routing with pipe sizes and valve locations.
Chilled water pipe lines shaft details.
Prepare schematic layout.
Design toilet exhaust and kitchen exhaust ducting.
And design the car parking ventilation.
COMPUTER KNOWLEDGE:
MEP Design Software:
HAP
E-20 FORM
Mc QUAY DUCT SIZER
Mc QUAY PIPE SIZER
CAREER PSYCHOMETRIC CHART ANALYSER
BETA TERMINAL DEVICE SELECTOR
EXPANSION TANK SIZER
CONVERTERS
Drafting Software:
AutoCAD – 2007
REVIT 2014-2017
Operating Systems:
Windows XP, Windows Vista, Windows 7, Windows 8.
Office Package:
MS Office 2010, 2007, 2003 (Word, Excel, PowerPoint)
TECHNICAL EXPERTISE:
FIRE FIGHTING JOB RESPONSIBILITIES:
Fire water Demand & Fire water tank Calculation following NFPA Standards. Head Loss calculation for Fire water pumps system.
Jockey pump, Main Pump, Diesel Operated Pump, and Booster Pumps Selection.
Sprinkler system, Fire Hose Cabinet, Water Hydrant system, Smoke detector, Heat detectors.
FM 200(Waterless system) Designing and Fire Extinguisher Selection.
EDUCATIONAL QUALIFICATION:
Diploma (R/AC) with 63.4% from Government Technical Training Center Guindy in 2007-2010
12 with 72.2% from Government Higher Secondary School at Athimanjeripet in March 2003.
PERSONAL DETAILS:
Sex : Male
Father’s Name : Vijayaraghavan
D.O.B : 31-08-1986
Marital Status : Single
Nationality : Indian Passport Number : T0729510
Language Known : English, Tamil, Hindi, Telugu And Arabic
Permanent Address : 51/1 New Number 52B Othavadai Street Konasamudram (Village
And Post) Pallipat Taluk Thiruvallur District Pincode -631202
DECLARATION
I hereby declare that the above furnished details are true to the best of my knowledge and belief.
Date : Yours Sincerely
Place :
Ref. No.HT/HR/GN L/517
15 May 2019
TO WHOM SO EVER IT CONC ERN
This is to certify that MR. MOHAMED AZARUDEEN.S (Passport No.N9182939 QID No.291**********) EMP CODE: 6102 from 15" May 2017 to 16" May 2019
His last held position was "HVAC MAINTENANCE SUPERVISOR” . He is a man
with dynamic behavior who always vibrant for company's bright future . we are fully satisfied with his work . we hope for his bright and prosperous future.
Cordially,
Moutaz Almousselli HR Manager In charge
HATCO for Trading & Contracting - Qatar
- •• •• •• • Driving Licence Temil Nadu]
th