Saudi Aramco Industrial Training

SIVAKUMAR HARI

Dubai, U.A.E.

Tel: Mobile +*** 050-*******)

E-mail: **************@*****.***

Page 1 of 8

PROFILE

Dedicated Draftsman / Checker with excellent Technical Skills & 27+ years of overall experience as mentioned:

• 7 Months of experience as detailing in charge & coordinator

• 16 years in Checking & Detailing of Storage Tanks, Spheres & its accessories which includes Foundation Details, Structures, Spiral Stairways, Inclined Stairways, Stair Towers, Roof Circumferential Platforms, Ladders, Pipe Supports, Grating Drawings, Foam

& Deluge Piping etc., coordinate with the Fabrication crew & assisting them in any clarification on the fabrication drawings.

• 5 years of experience in Detailing of Horizontal Storage Tanks, Underground Small Diameter Tanks, Heaters, Silos, Hoppers, Ducts, Pipe Supports, Pipe Rack, Conveyors, Temporary Support Structures, Platforms, Equipment’s, Equipment Supports, Lifting Drawings, Piping, Isometric drawings, Basic Civil Drawings etc.,

• 1 year 5 months in Detailing of offshore Structural Platforms, Cable Tray Supports, Platform Penetration Drawings etc.,

• 10 months of experience in preparation of yacht (Private boat) drawings.

• 3 years 6 months in Detailing of Steel Platforms & Steel structures for Steel plants. My Overall Experience & Exposure is in the following industries: Ø Fabrication

Ø Storage Tanks (Mainly API 650 & API 620)

Ø Oil & Gas, EPC Projects

Ø Offshore

Ø Cement Plants

Ø Steel Plants

Ø Ship Building

Ø Freelancing

SIVAKUMAR HARI

Page 2 of 8

SKILLS

v AutoCAD 2D & 3D

v Micro station 2D & 3D

v Tekla Structures

v PDMS (Fresher)

v NavisWorks

v Microsoft Office

v Drafting Co-ordination

PROFESSIONAL EXPERIENCE

v CB&I Storage Solutions (CB&I Eastern Anstalt)

EPC, Oil & Energy

Floor 6, Convention Tower,

Al Mustaqbal Street, World Trade Centre,

Dubai, U.A.E

From June, 2007 to January, 2017 &

From April, 2019 to Present

Position: Senior Storage Tank Designer & Checker

Job Responsibilities:

• Preparing Advance Bill of materials.

• Checking & Detailing of Storage Tanks & Accessories Drawings in 3D & 2D

• Preparing API 650 Data sheets

• Operations & Maintenance Manual

• Weld Sheets

• Construction manuals

• Co-ordinate with Fabrication Workshop & site for any Technical Queries. General Arrangement & Details drawings for Storage Tanks, Shovel Bottom Tanks, Development drawings for shell, Bottom, Roof, Shovel Bottoms, Anchor Bolt Setting Plan, Anchor Bolts & Chairs, drip rings, Wind Girder, Internal & External Floating roof Tanks, Shell & Roof, Nozzles, Manways, Low type Nozzles / Flush Nozzles, Foam & Deluge Piping, Structural Components like Roof circumferential platform, Spiral stairways, Ladders, Shell Platforms, Gaugers platform, Floating roof & its Components, Pipe supports, Insulation supports, Customer Piping Supports, Basic Foundation drawings, & proposal sketches etc., as per API Standard, Customer specification & Standards like OSHA & PIP (process industry Practice). Training Undergone:

• Micro station In house training.

• API 650 & API 620 In-house training

SIVAKUMAR HARI

Page 3 of 8

• Special Training for Welding Requirements

• Micro station 3D Training

• CB&I Standard Software for Preparing Bill of Material

• Agile Billing Software for preparing Bills of Material Projects:

• Saudi Kayan Olefin's Project (Al-Jubail, Saudi Arabia) (K.S.A.) Saudi Aramco Project

• MA'ADEN Phosphate Project

• JGC for NCP Project (Al-Jubail, Saudi Arabia) (K.S.A.)

• NMPP (New Multi-Product Pipeline Project (Transnet/NMPP ALLIANCE) Jameson Park, Heidelberg, SouthAfrica)

• Manifa (Saudi Arabia) (K.S.A.), Saudi Aramco Project

• Takreer (Abhdhabi)

• Shyabah (K.S.A) Saudi Aramco Project

• Adma

• Sadara, (K.S.A) Saudi Aramco Project

• Jazan, (K.S.A) Saudi Aramco Project

• Adma & much more which is not mentioned.

v Inco International

Jebel Ali Free zone, Dubai, U.A.E.

From September 2018 to April 2019 (7 motnhs)

Position: Detailing In charge & Coordinator

For Duqm Refinery, Utilities area, Duqm, Oman

Job Responsibilities:

Responsible in Checking the drawings of Storage Tanks & its accessories as per API 650 Code, Customer Specifications, Standard Engineering Practice & Lessons learned from previous experience.

• Review the Fabrication drawings detailed by Draftsman.

• Attend Weekly Engineering progress meeting with Petrofac.

• Assign Work to other draftsman’s in the team.

• Raise technical Queries.

• Co-ordinate with Construction Team.

• Assist Procurement Department in preparing MTO.

• Coordination with subcontractors / Vendors.

• Visit Other design offices for discussion & Planning. v Saipem (Profile Middle East)

EPC, Oil & Energy

Floor 13, B.M.Tower, Al Wadha Street, Sharjah, U.A.E From March 2017 to August 2018 (1 year 5 months)

Position: Structural Steel Designer

SIVAKUMAR HARI

Page 4 of 8

Job Responsibilities:

Preparation of drawings for Offshore structural Platforms, Cable Tray supports, Platform Penetrations Drawings, Grating Drawings, Transportation & Installation Drawings for Offshore Platforms, Jackets, etc., Back drafting & issue drawings for Approval & Construction, As-Built Drawings using MicroStation, Tekla, AutoCAD & Navisworks. v PLATINUM YACHTS FREE ZONE CO. (FZCO)

Ship Repairing/Conversion Company

(Dubai, Jebel Ali Free zone, United Arab Emirates) Auto Cad Draftsman (R2000 & R2004)

From July, 2006 to May, 2007 (10 months)

Job Responsibilities: Preparation of General Arrangement, Profile & Deck, Lines plan, section details &Steel foundation drawings for various equipment inside the Ship with the existing Data, taking Measurements on board & preparing the drawings as per the Required Modifications on Board. v PETRON EMIRATES CONTRACTING & MANUFACTURING CO. L.L.C.

(Dubai, United Arab Emirates)

Auto Cad Draftsman (R2000 & R2004)

From May, 2001 to June, 2006 (5 years, 1 month)

Ø Project: Gas Injection Pilot Project (EPC for Asabthamama zone ‘A/B’) U.A.E Ø Project: 11620 South Pars Gas Dev. Phase-1 onshore Facilities Project

(National Iranian Oil Co.)

Ø Project: RasLaffan Onshore Expansion Project, (Chiyoda) (Qatar) Ø Project: DUBAL (Dubai Aluminiuum) (Multiple Projects) Ø Project: Reverse Air Dust Collector (Ras Al-Khaimah, United Arab Emirates)

(RAK white cement co.)

Ø Project: Jotun Paint Factory (Dubai, United Arab Emirates) Ø Project: Fabrication of conveyors (Abudhabi, United Arab Emirates)

(Emirates flour & animal feed plant)

Ø Project: Dorood Project Onshore Facilities (IRAN)

(ELF Petroleum Iran)

Ø Project: Tail Gas Incinerator (Sharjah, U.A.E.)

Job Responsibilities: Preparing General Arrangement & Fabrication drawings of Equipment, Manifold Skid, Insulation drawings, conveyor Way Bridge drawings, Development drawings for Ducts, Mitres, Transition etc., SIVAKUMAR HARI

Page 5 of 8

EquipmentSupports, Pipe Supports, Platforms, Ladders, Transportation & Lifting drawings for equipments, Staircase material nesting drawings& As- built drawings for client’s final submission.

MAJOR PROJECTS HANDLED INDIVIDUALLY

Ø SuweihatCCP Power & Water Project

(United Arab Emirates)

Job Responsibilities: To start with bill of quantities during tender & after the contract was awarded was fully involved in preparing the actual quantities of material for procurement purpose & preparing fabrication drawings for 34 nos. of platforms, Silencer Supports, Stair Towers, Staircase, Equipment supports, Ladders, etc. & visit site for Customer Queries Clarifications & drawing markups for modification as per the site conditions, maintaining daily status of drawings.& prepare AS-built Drawings. Ø Supply & fabrication of 2 numbers sulphur storage bins.

(Enersul Technologies, GMX sulphur forming plant, Canada) Ø Fabrication & supply of storage tanks

(Jebel Ali, United Arab Emirates, Jebel Ali Desalination Plant) Ø Fabrication & supply of horizontal chilled water storage tank.

(Arabian Mix Company. Dubai, U.A.E.)

Job Responsibilities: Preparing bill of quantities during tender & after the contract was awarded was responsible for preparing the fabrication drawings for Distillate water Buffer tank, 12 no’s, of Clean oil, Dirty oil & Lube oil Tanks, platforms, Ladders & Lifting Drawings for the above-mentioned tanks. Ø Sabhan Bakery Mezzanine floor expansion

(Kuwait Flour mills, Kuwait)

Job Responsibilities: Preparing bill of quantities during tender & after the contract was awarded visited Kuwait for taking actual dimensions from the site & prepared fabrication drawings as required at site & interacting with the client Queries.

Ø Hot oil furnace for AL-Khaleej gas project

(Furnace Engineering, Japan, AKG Projects, Heaters at Qatar) Ø Regenerant Heaters

(RasLaffan onshore Project), (Qatar)

Job Responsibilities: Preparing fabrication drawings for Heater casing, Coils, Platforms

& ladders for stacks.

Ø Fume Treatment Plant

(Potline 79B Project, DUBAL), Dubai

Ø Kashagan Field Development Project

(Supply & Fabrication of Air intake stacks 10 nos.), Kazakhstan SIVAKUMAR HARI

Page 6 of 8

Ø Ducts, Bypass &Outlet stacks of HRSG

(Qatar Gas II Development Project, Qatar),

Job Responsibilities: Preparing bill of quantities during tender & after the contract was awarded was responsible for Preparing Heater casing, Coils, Platforms & Air intake Stacks, Outlet & bypass Stacks, ladders for stacks & Lifting Drawings for Stacks.

v M.S.AL-SUWAIDI EST. FOR CONTRACTING, (Kingdom of Saudi Arabia) Auto Cad Draftsman (R12 & R14)

From June, 1995 to December, 1998) (3 years, 6 months) Ø Project: Hadeed Fume Control & Bag house Improvement Project (Jubail, K.S.A.)

(Hadeed Steel Plant)

Responsibilities: Preparing General Arrangement & Fabrication drawings of Support structures, & prepare as-built drawings of the same for final client submission.

Ø Project: Sabayek Ferro Alloys Project (Turnkey project) (Jubail, K.S.A.)

(Sabayek Ferro Alloys Plant)

Responsibilities: Preparing General Arrangement & Fabrication drawings of Day bins, Hoppers, Silos, Equipment Supports, Pipe Supports, Platforms, Ladders, As-built drawings for clients final submission

& Preparing bill of materials for procurement of material used for construction.

Ø Project: Petrokemya Expansion Project (Jubail, K.S.A.)

(Petro kemya)

Responsibilities: Preparing General Arrangement & Fabrication drawings of Support structures, & Platforms & worked as a Quantity Surveyor for taking the quantities of civil works done & submitting the same for invoicing department for billing purpose.

Ø Training: CNC Programmer / data encoder (for TDK 1000/3 m/c) Responsibilities: worked as a CNC programmer/data encoder for a 3-way drilling machine.

A special training was given by PeddinghausU.S.A. in peddimmat software for feeding the data in the computer & machine operation.

FOR A MANUFACTURING / CONSTRUCTION COMPANY

v ALERT SAFETY.Bangalore, (Manufacturer of safety equipment) Auto Cad Draftsman (R10)

SIVAKUMAR HARI

Page 7 of 8

Responsibilities: Preparing General Arrangement & Routing drawings for installation of sprinkler systems, safety equipment’s & preparing the bill of quantities for the same.

FOR A CONSULTANT

v SOFTALK SYSTEMS.Bangalore, (consultant for drawing works) Auto Cad Draftsman (R10), (Part Time)

From April, 1994 to March, 1995 (1 year)

Responsibilities: Preparing General Arrangement & Detail drawings of various structures & mechanical equipments.

v R & B DETAILERS. Bangalore, (Freelancer)

Auto Cad Draftsman (R14)

From February, 1999 to January, 2001 (1 year, 11 months) Responsibilities: Preparing General Arrangement & Fabrication drawings of Support Structures, Platform, Chimneys, etc., for various Projects & Various Clients.

AS A TRAINEE

v LARSEN & TUBRO LTD. Bangalore Works, (Manufacturer of earth moving equipment) Apprentice Trainee Draftsman

From 31.03.1994 to 30.03.1995 (1 year)

Responsibilities: Preparing General Arrangement & Detail drawings of earth moving equipment both manually & in auto cad. Acquired good knowledge in detailing, tracing & preparing as-built drawings & maintaining the records for the same.

EDUCATION:

• S.S.L.C.

St. Meera's High School, Bangalore.

• P.U.C. (E.S.C.A.)

R.B.A.N.M.S Pre-university College

• Diploma in Draftsmanship (ITI / NCVT)

RTPI Industrial Training Institute, Bangalore.

• AutoCAD

BDPS, Chennai & Cadd Center, Dubai

SIVAKUMAR HARI

Page 8 of 8

• PDMS

CADD CENTER, Chennai

• Tekla (X-steel)

Tekla, Dubai, U.A.E

PERSONALDETAILS

Father’s Name: G. Sivakumar

Date of Birth: 26.01.1974

Age: 46 yrs.

Marital Status: Married

Nationality: Indian

Passport Number: M5358027 (expiry on 31.01.2025)

Driving License: Yes, Dubai

Languages Known: English, Hindi, Tamil, Kannada, Telugu and Malayalam REFERENCES:

Mr. Tony Cheng

Manager, Design

CB&I-Mcdermott

6th Floor, Convention Tower, World Trade Center

Dubai, U.A.E.

Phone: +971*-*******

E-mail: **********@***.***

Mr. Johnson Podiyan

Supervisor

CB&I Eastern Anstalt

Standard Charted Tower, Opposite Emmar Square,

Down town Area, Dubai, United Arab Emirates

Phone: +971*-*******

E-mail: ********@*****.***

Mr. Rathnakaran

Drafting In-charge

Petron Emirates Contracting. & Manufacturing . Co. Al quoz Industrial Area 3,

Dubai, United Arab Emirates

Phone: +971*-*******

E-mail: *********@**************.***

Mr. Balasubramanian Mohan

Executive Designer - Structural, Structural, Civil and Offshore Specific Engineering

Saipem Contracting BV Netherlands Sharjah Branch

10th Floor, BM Towers, Al Ittihad road

Al Nahda Area, PO Box 1802, Sharjah

United Arab Emirates – UAE

Phone: +971*-******* Extension: 7446

E-mail: *************.*****@******.***

Contact this candidate