Gas Processing Plant Operator

Apply for the post of: SIMOPS OPERATOR

Name: MANIKANDAN

Mail: ************@*****.***

Mob. Number: +91-994*******, +91-887*******

Objective:

I have overall 9+ Years above experience in Oil and gas. To work for an international oil and gas organization, which will utilize my management experience in oil and gas gained working in different concerns.

Technical Qualification:

Diploma in Petro chemical Engineering

Safety Course Completed:

●Personal Survival Techniques

●Elementary First Aid

●Fire Prevention & Fire Fighting

●Personal Safety & Social Responsibilities

●Helicopter Underwater Escape Training

●T BOSIET OPITO APPROVED (valid)

SENIOR PRODUCTION OPERATOR

SPIE OIL AND GAS SERVICE OFFSHORE QATAR, through TOTAL E&P GOLFE LIMITED, (AL KHALIJ OIL FIELD), QATAR.

Period: 01 March to still

Operation:

Oil producing from two wellhead platforms; oil and gas processing; gas is processed by gas sweetening unit and used for power generation; gas is processed by Gas dehydration unit compressed and injected to the reservoir; produced water injected to the reservoir.

•Separation: Oil, water, and gas separation.

•System, Units, and equipment’s handled:

Process:

•Oil/gas Production wells (ESP wells and natural flow wells)

•Injection well (gas injection and water injection)

•Three phase horizontal production separators (Test separator, HP separator, LP separator, and oil surge drum)

•Heater (shell and tube type, heating medium= hot water)

•MOL pumps (centrifugal pumps)

•Custody metering skid (Daniel flow meter; auto sampling system; online BS&W analyzer and density meter; Meter prover)

•Produced water system (Degassing drum; produced water pumps; produced water conditioner; produced water injection pumps; Injecting through Injection well A-8H casing)

•Gas sweetening unit (capacity = 2.5 mmscfd)

•Gas dehydration unit – Thyristor controller reboiler – (Capacity = 9.1 mmscfd)

•Sour Gas Injection compressor (purpose: to inject the gas in to the reservoir through the injection well; Type-Reciprocating compressor Made: Ariel; 5 stages and 4 cylinders; Capacity: LP stage – 2.9 mmscfd and HP stage – 5.5 mmscfd; Coolers-Fanfan cooler; PLC-Allen Bradly; Injection pressure-5200 psig)

•Vapor recovery compressor (0.5 to 40 psig; Capacity – 2.3 mmscfd: PLC – Allen Bradly)

•Chemical Injection system

•Drain system (open drain drum and closed drain drum, open drain pumps and closed drain pumps)

•Flare system (HP flare and LP Flare; HP KOD; LP KOD; Flare ignition system-Flame front generator type ignition)

•Utility:

•Fuel Gas system (Fuel gas buffer vessel, Fuel gas filter and fuel gas heater)

•Turbines with WHRU (company: Siemens, Capacity: 6.44 MW, Duel fuel: gas and Diesel, 2 numbers)

•Emergency diesel generator.

•Inst air compressors (Instrument air unit and vessel and Utility air vessel)

•N2 generators, RO Unit, Cooling water pumps, Sewage treatment plant.

•Fresh water and diesel storage tanks.

•Safety:

•ESD and PSD system.

•F&G System (HC, H2S, heat, Smoke, Line of sight, Flame Detectors; Manual call point)

•PTW system (hot work, cold work, confined space entry)

•Fire water pumps (centrifugal), Jockey pumps, Emergency diesel fire water pumps, Fire water with foam monitors and Deluge system with deluge valves.

•Portable Fire extinguishers.

OIL FIELD UNIT COMMISSIONING/PLANT OPERATOR THROUGH BRUNEL INDIA LTD from Jan 2019 to Jan 2020 ALKHOR NGL COMPLEX QPR QATAR

DUTIES:

oPre-commissioning, Commissioning, Startup, Normal Operation

oFilling to field logbook for record & troubleshooting

oTaking plant round regularly for any abnormalities & normal reliable plant operation and reporting any abnormalities to Panel operator and supervisor

oShut down operation in Vessels, Tank, Compressors etc.

oResponsible for the safe operation, safe start-up & shutdown of the plant

oSchedule changeover of rotating equipment’s as per SOP

oFamiliar with operation of personal protective equipment

oRecord hourly tank level, daily tank temperature

oParticipate isolating and preparing P.D Meters, loading lines, tanks etc.

Responsibilities during Pre-commissioning, commissioning stage:

•As per P & Id’s Mechanical check of lines, Pressure testing of pipelines by pneumatic and Hydraulic methods.

•Flushing of pipelines by Conventional methods such as Gasket bursting, water flushing, Air blowing.

•Solo run of motors, Trial run of all type’s pumps and Compressors

•Prepared a punch list of construction completion, Ready for startup unit

•Instrument loop checking, function test of heaters, compressors.

•Pre commissioning procedure review, chemical cleaning and passivation of compressor lines

•Nitrogen purging of the flow lines.

Responsibilities after commissioning

●Startup & Shutdown activities, normal operation control, operation trouble shooting and maintenance activities.

●Taking regular rounds of unit to ensure safe operation of the unit

●Recording and reporting of field parameter to Shift Supervisor and if required to Panel officer

●All activities in area, including, but not limited to, operation of the equipment, preparation for maintenance, preventative maintenance activities, monitoring equipment, minor maintenance, other routine duties

●Knowledge on Local PLC operation like Compressor startup & shutdown

●Sampling, Updating Checklist, Housekeeping

●Ensuring strict compliance with safety procedure, work permit procedure (PTW).

●Updating Checklists periodically for Safety Audit.

●Maintain the record for the future/past shutdown job.

PLANT OPERATOR

ADCO (ASAP FIELD) through Alnahiya Group

Period: Aug 2017 to Oct 2018

WELL HEAD OPERATIONS:

Operation of Christmas tree and storm Choke & Lower & Upper tubing master Valves, wing Valves free size choke, Adjustable, Flow line inspection & Servicing.

Pig Launching & receiving. Arrival manifold, Collector Equipment, Pressure Relief valves, Familiar with work permit systems.

Gas Testing, Mechanical and Electrical Isolation Procedures, Co-ordination with maintenance crew, Troubleshooting, reporting, Handled station-capacity 400000 Bbl./Day Oil

1.AREAS WORKED:

Tank Form Operations

Handling of Pumps, Compressors and Turbines

Gas testing for hot work permit

Chemical Injection

Gas liquid Separation Process

Gas Dehydration & Glycol Regeneration Process

Crude Oil Stabilization Process

Punch list preparation

Hydro testing of flow lines

Vessel cleaning & inspection

Functional testing of the running equipment

Nitrogen purging of the flow lines

House Keeping

OPERATIONAL EXPERIENCE

●Commissioning

●Control room & SCADA operation

●Panel Board operation

●Startup & Shut down of the gas processing plant

●Well head operation & well testing

●Chemical injection system

●De-Hydration Plant Operation

●Sampling of Oil, Gas & Chemical

●Pigging Operation

●Instrument Air System

PRODUCTION OPERATOR

OFFSHORE/ONSHORE ABUDHABI, through Alnahiya Group

Period: Aug 2013 to June 2017

Duty & Responsibilities:

Familiar with wellhead, oil manifold chokes, HP, & LP separators (Three Phase), Dehydration Tank, Heat Exchangers, Demulsifier& Anti form injection, other chemicals (Scale Inhibitor, Corrosion Inhibitor, Water Clarifier, etc.) injection rate calculations, chemical injection pumps, Produced Water Tank, Skimmer Tank, Produced Water flash drum, Knock out drum, pig launching and receiving (foam, scraper, cup and intelligent) preparation of daily production reports (Gas, Oil & Water),Well Test Data entry, Oil & Gas calculation for GOR. Operation & Control Of Roof Top intermediate Tanks (500 M 3),handling transfer pumps, booter pumps, Main Pumps, current level of the tanks, Bottom oil transfer operation, water pumps, main pumps, current level of the tanks, Bottom oil transfer operation, water Draining and operation of all motor operating valves at Crude Oil pumping Station.

Test Run for the standby equipment as per the Schedule, isolations, and de- isolation of equipment for Maintenance, familiar with Work permit Systems, gas testing, troubleshooting reports, Checking and testing all alarms and trip switches with the instrument technicians and also involving the preventive maintenance of the plant. Familiar with pneumatic panels, different types of valves, like PCV, LCV, FCV controllers, and transmitters. Familiar with the power turbines (ROLLAND, ROLLSROYCE) parameters, starting from the PLC & DCS panel, CO2 and UV detectors isolation for internal inspections, Fuel Gas purging and filter cleaning etc. Additional requirements involved lab sampling (oil & gas) and analysis like BS&W and PTB. Conversant in handling of DCS (Distributed Control System) and SCADA (Supervisory Control and Data Acquisition) Systems.

OIL & GAS GATHERING STATION:

Operation & Control of wells through different headers of optimum production. Oil Manifolds, Gas Lift Manifolds, Surge Tanks, Separators (Two/Three Phase), Dehydration Tanks, Water Disposal Pumps, Crude Transfer Pumps, Chemical injection, Gas/Oil Line Pigging Operations, Well Testing, Computerized Well Testing etc.,

GAS DEHYDRATION UNIT

Tri-ethylene glycol (TEG) is used as a dehydrating medium Operations of Coal easer Separator, Glycol Circulation pumps, Glycol contractor, Glycol over Scrubbers, TCV, Lean and Rich Glycol heat exchanger, Flash Drum, Carbon acetify Filter, Reboilers, & Surge Tanks operations Reflux condenser, Still Columns, Sampling rich & Lean Glycol Maintaining PH.

Controlling heat exchangers Operations. Knock out drums, Propane accumulator’s chillers, Filter Separators. Chemical Injection such as Demulsified, Antiscald inhibitor, Methanol Injection corrosion Inhibitor etc.

PROCESS OPERATOR

ONGC MUMBAI HIGH OFFSHORE

Period: July 2010 to July 2013

DUTIES & RESPOSIBLITIES:

Duty & Responsibilities:

Inspection & Operation of Christmas tree.

Operation of Gas lift injection wells, Water injection wells.

Actuator operated Master valve and Wing valve, SSV (DHSV) operation.

Well equalizing, SSSV operation.

Maintaining unmanned well head platforms and taking FTHP & STHP.

Test separator handling, well testing.

Orifice changing in the flow lines (DANIEL).

Panel board operations, Annulus pressure bleeding operation

Flow line choke changing and adjusting, Flow line PSL & PSH switches.

BDV panel operation, orifice changing in the flow lines.

Wastewater Treatment:

Receiving sup level maintains. Surge bound change over, Equalizing Tank operation, TP1 & DAP Tank operation, Aritation tank operation. Final Clarification Disposal sump. All pump operation, etc.

Utilities: Well experienced in Utility Operations such as Gas Turbine Generator, Utility & Instrument Air Compressor, Centrifugal Pump, Piston Pumps, Water Treatment Plant, Produced Water Treatment Plant, Raw Water Treatment, Sewage Water and effluent treatment, cooling Tower, Chemical Injection.

Safety Devices:

H2S Safety, Fire safety, fire Extinguisher (Foam, DCP & CO ;) using in fire classification, deluge valve operation, firewater pump operation. Breathing Apparatus, Safety Jacket, and Gas detector. Smoke detector, heat detector operation, H2S deduction, fixed monitoring system, electronic monitors, and tube detector.

Personal Details: -

Name : MANIKANDAN

Date of Birth & Age : 21-06-1989

Nationality : Indian

Marital Status : Married

Languages Known : English, Hindi, Tamil, and Malayalam

Passport Details : No. K8604826 Until 25thOct 2022 (Emigration Check not required)

Declaration:

I hereby declare that the above particulars given in this Curriculum Vita are true and I shall do my best to give you entire satisfaction.

BEST REGARDS,

MANIKANDAN

Contact this candidate