CAREER OBJECTIVE

** *****’ rich experience of Electrical Design Engineer in delivering optimal results & business value in high-growth environments

PROFESSIONAL QUALIFICATIONS:

Approved Saudi Engineering Council Member : 532939

IET MIET membership (110*******), Since 2013

MIEEE, IEEE Member since 2012.

Graduate member from Engineer of New Zealand Since JUNE 2014 (GIPENZ)

AQP CSCS card hold degree since 2014.

KNPC(Kuwait national Petroleum corporation ) approved Electrical Engineer

PROFESSIONAL CAREER HISTORY:

I-Man Co Contracting& Trading Company ; Electrical Engineer, Saudi Arabia, Mar2019-Present

Panel board termination of transformer and RMU unit with various cable sizes of 185,300,500 SQ MM.

Distribution cable laying from transformer to mini feeder pillar (3X300 SQ.MM) cable and (4X70 SQ MM)

Installation of Medium voltage Switch gear 13.8KV and 33KV for the Feeder Network

Customer cable laying cable for metering purpose and Inspecting and testing as per 17th Edition C&G 2391-52

Construction of 13.8 KV and 33KV medium voltage Unit-Substation for main feeder network

Review technical submit and offer received from the client in the tender and proposing low L1 for the project as subcontractor or supplier.

Universal Engineer Chennai PVT ; Project Engineer, Nov 2017-Mar2019

Drawing single line diagram for coach electrical Layout in Auto CAD2012 (2D &3D) interior as well exterior design as well.

Working in a team environment at all phases from concept design of interior furnishing to its final product design.

Preparation of Material Requirement as per BOQ Statement.

Preparation of Daily, Weekly & Monthly Progress Reports.

Able to communicated in English Supporting foreign clients with requirements definition, project definition, and project planning

ESEEE ELECTRICAL PVT ; Electrical Engineer, Trichy India, Dec 2016-Nov2017

Drawing single line diagram for hp Induction Motor from circuit breaker to the motor for various dosing pump in oil and gas plant alone with voltage drop and load calculation using (Auto-cad 2012 &2014 2D & 3D).

Working in a team environment at all phases from concept design to final products

Support clients with requirements definition, project definition, and project planning

Inspecting and testing as per 17th Edition C&G 2391-51

Al Jalhami Contracting & Trading Company; Electrical Engineer, Saudi Arabia,Nov 2014- Dec 2016

Drawing Single line diagram for 1000 KVA, 500KVA Substation unit and distribution system for the given Project/Mini-project/ metering work order given by our client (Saudi Electricity Authority) in (Auto-cad 2012 &2014 2D & 3D).

HT/LV cables and Panel termination in the unit Substation transformer and RMU unit

Installation of circuit breaker according load calculation 400A, 800A in 11KV as well as 33KV

Panel board termination of transformer and RMU unit with various cable sizes of 185,300,500 SQ MM.

Distribution cable laying from transformer to mini feeder pillar (3X300 SQ.MM) cable and (4X70 SQ MM)

Installation of Medium voltage Switch gear 13.8KV and 33KV for the Feeder Network

Customer cable laying cable for metering purpose and Inspecting and testing as per 17th Edition C&G 2391-52

Construction of 13.6 KV and 33KV medium voltage Unit-Substation for main feeder network

Review technical submit and offer received from the client in the tender and proposing low L1 for the project as subcontractor or supplier.

KCCEC (Kuwait Engg& controls); Electrical Design Engineer, Kuwait, Nov 2011- Jun/2014

Worked as Electrical Engineer my responsibility are drawing layout diagram, Pump & Sump Room Cable Erection Induction Motors, Torque/ Speed characteristics, Star Delta Starters, DOL Starters, Reversing starters, interlocking circuits

Construction of 33 KV Substation involves Testing and commission of substation erection 33 KV switch gear also cable route from point a (Ahmadi road) to point b(MEW power station)

Responsible for Conducting root cause analysis of failures and provided breakdown solutions within minimum time lapse.

HT/LV cables with end and termination on both side switchgear side and on the motor side.

HT cable laying and cable sizing calculation done to meet peak load current demand. choose of cable used XLPE/STA/PVC/CU for HV side 3/300 Sq.mm, XLPE/PVC/AL for LV side 4/300 Sq.mm HT/LV cables laying with end termination as per BS7671

Estimation, Measurement, Laying & Termination of Various cable sizes like 16, 25,120 185 SQ MM Street pole erection with feeder pillar box erection 11KV, 13.6 KV,33KV High voltage lines.

Responsible for recording compile the data (ampere, Voltage, TOD). Conducted root cause analysis of failures and provided breakdown solutions within minimum time lapse. Laying of HT/LV cables with end termination and 25kV AC and 750V DC electrification power supplies.

Checking the Voltage drop Calculation and cable sizing. Measurement Documentation & As Built Drawing Documentation as per ETCI.

Providing technical support to three assets, comprising nine offshore production platforms and FPSOs and three onshore gas plants. Maintaining safe production, technical integrity and maintenance of critical equipment

Responsible for installation of in CT Coil in power transformer according load current 300/5A, 100/5A, 150/5A with CT coil Ratio of 60:1, 20:1, 25:1 according to IEC61869-1

Giving the team member instruction to the works and supervisor to get the job done in right time under me two supervisors is involved in work operation e.gCoordination with Clients, PMC and all other Vendors

Presenting technical& Measurement sheet in English as built diagram received from the client. Preparation of Material Requirement as per BOQ Statement. Preparation of Daily, Weekly & Monthly Progress Reports.

ABB Electrical Engineer, Sweden. Aug/2008 -Aug/ 2010

Meggering done for both transformer side and cable side to find out insulation resistance of cable and transformer winding in good condition.

Drawing single line diagram for Pump & Sump, Induction Motors of 190KW to Switchgear and Star Delta Transformer to Motor with medium voltage level of (13.8 KV, 11KV, 33 KV)

HT/LV cables laying with end termination as per BS7671

Maintaining the competitor analysis reports and literature for latest mobile antenna technologies

ADADEMIC EDUCATIONAL/QUALFICATION:

M.Sc. (Electrical Engineering with power electronics), University Of Bradford, 15/Sep/2010-18/Sep/2011

Dissertation:

“Design of compact size RFID tag antenna for various applications” the main objective of the project is design an antenna and implantation the designed antenna in metallic and non-metallic objects for purposes of tracking logistical applications .Thebased on the project research work submitted in international journal ISBN:978-3-659-58320-9

Relevant Modules:

Power Devices - 58% Digital Signal Processing (DSP) – 68%

Control system and design – 60% Mobile robotic and wireless sensor -63%

Energy studies - 60%Power Converters - 60%

Research (seminar series) – 70% (control of voltage of reactive power in LV/HV distribution system)

B.Tech. (Electrical and Electronics Engineering) with First Class, Sastra University, India,30/June/2004- 6/April/2008

Final year Project

“Industrial load consumption and monitoring system” using Latest RF –Technology, the main aim of the project is to reduce the consumption of power during the peak demand and also prevent the theft of power.

Relevant Modules:

Power Systems - B (70%) High Voltage DC transmission systems (HVDC) - B(70%)Protection and switch gear - B (70%) Renewable source of Energy - B (70%)

Power Electronics I -B (70%)Power Electronics II- C

Project (Energy consumption) – A (85%)

TECHNICAL/I.T. SKILLS

AutoCAD2014, AutoCAD2008, Auto CAD2012 (2D &3D), Mat labR2010a Programming, HFSS13.0 (3D) (antenna design based on Finite element analysis software), ADS2009 (antenna design software)

Professional Experience in MS office, Excel, Word, PowerPoint / primavera p6/ Microsoft Visio 2011.

17th Edition Electrical Wiring Regulation BS7671, AS 3000, NIC1000 Wiring Regulations, ISO 13628-6.

LIST OF PAPER PUBLISHED:

RFID Tag Antenna Design ISBN:978-3-659-58320-9

Contact this candidate