Material Specialist Energy Service

SHAUN M. CRAWFORD, CSP

* ******** ** ********, ***** 75605

903-***-**** ********.******@*****.***

– ENVIRONMENTAL SAFETY AND HEALTH PROFESSIONAL –

Accomplished and conscientious safety professional with more than 18 years’ experience in Health, Safety, and Environment (HSE) program management. Skilled at leading teams in performing job hazard and job safety analysis, incident investigations, and safety audits. Extensive expertise with Occupational Safety and Health Administration (OSHA) and Mine Safety and Health Administration (MSHA) regulations and guidelines and ensuring compliance. Entrusted with managing up to $200K in resources annually as well as offering authoritative advice and guidance to executive leadership on all matters relating to safety and risk management. Certified Safety Professional offering extensive safety expertise, program management, leadership skills, and work ethic to deliver superior outcomes in alignment with strategic goals and objectives.

Expertise In

Safety and Health Policy Failure Analysis Statistics Analysis

Accident Prevention/Reduction Corrective Actions Accident Investigation

Inspections/Audits Team Motivation Regulatory Compliance

Verbal and Written Communication Job Hazard Analysis Training

Safety Consulting Hazard Recognition Program Development

Behavioral Based Safety Training Development Safety Budgeting PROFESSIONAL HISTORY

NINE ENERGY SERVICE/REDZONE COIL TUBING

HSE Supervisor, June 2018 to Present

Job Duties

Responsible for all OSHA, environmental compliance for five locations

Conduct accident investigations using the Taproot structured software

Perform field audit and observation to ensure compliance with company, customer, and regulatory agencies

Conduct weekly safety meetings with employees and managers

Check flow iron for API inspection compliance

Enforce safety policies and proper usage of SOP for operations

Manage all accident and injury cases

Oversee two other HSE coordinators at different locations

Communicate findings and corrective actions weekly to managers at local and regional level

Possess excellent written and verbal communication skills

Manage safety data systems (ISNetworld, PEC, and Avetta)

Monitor and audit all third-party training

Manage and implement all customer required safety policies Accomplishments

Reduced TRIR to 0.54 year over year

Preformed 20+ Taproot investigation and put into place successful corrective and preventative actions

Increased stop works and near miss reporting

Completed extensive JHA from start to finish for coil tubing job SHAUN M. CRAWFORD PAGE TWO OF FOUR

No lost time or job restriction worker compensation cases

Case management by building relationships with Occupation Medical Clinic

Built open relationships with clients to strengthen partnership RSG RESOURCE SERVICE GROUP, BOSSIER CITY, LA

Safety Manager, 03/2015 – 06/2018

Responsible for all OSHA, DOT, and MSHA training and maintain all documentation

Supervisor training to meet MSHA and OSHA mandatory requirements

Perform safety inspections at mine site to ensure compliance with MSHA regulations including high wall evaluations, equipment inspections, electrical compliance, and task training of equipment

Meet with customers to maintain good relationships and continuity with best practices

Perform safety inspections at field OSHA sites to ensure compliance with OSHA and customer standards and policies

Supervise safety activities for entire job site

Supervise safety at all OSHA and shop locations

Ensure compliance with all Local, State, and Federal regulations

Manage all accident and injury cases

Accomplishments

12 MSHA inspections without a citation

Built safety inspection program to increase safety and compliance awareness

No lost time incidents

Put into place an employee lead safety inspection program to strengthen awareness among work force

Start a successful Behavioral Based Safety (BBS) program with monthly rewards

Built transparency and confidence in safety program with clients FMC TECHNOLOGIES FLUID CONTROL, KILGORE, TX

QHSE Supervisor, 06/2014 – 01/2015

Job Duties

Oil and Gas service company that services Frac flowline, performed daily Safety and Quality Inspections to OSHA Safety Requirements, company policies, and API Q2 Guidelines

Facilitated weekly Safety and Quality meeting to technicians and weekly Hazard ID sweeps

Performed compliance audits to customer and FMC Quality Management System at FMC bases around the country

Reported and managed all injuries and incidents

Managed training for all technicians

Assisted with converting all Quality documents to conform to API Q2 Standard

Conducted Final Inspection on finished product

Accomplishments

Edited API standard to get service center up to API Q2 standards

Evaluated the workflow of Kilgore facility and made changes to increase efficiency and compliance with standards.

Put into place a weekly employee safety walkaround

Got computer-based training up to 100% compliance SHAUN M. CRAWFORD PAGE THREE OF FOUR

REPUBLIC WASTE SERVICES, KILGORE, TX

Operations Supervisor-Route Auditor, 02/2012 – 06/2014 Job Duties

Hired, trained, and managed a team of 17 drivers and dispatchers in daily operations of commercial and industrial waste removal

Acted as Safety Point of Contact for the East Texas Business Unit, ensuring proper interpretation and compliance with regulatory requirements and internal safety guidelines

Assigned duties, monitored performance, and ensured adherence to operational procedures, safety requirements, and company policies

Conducted performance evaluations and provide guidance geared toward professional development; identify key personnel for advancement and provide mentorship for newly promoted personnel

Facilitated Quality Safety Committee team meetings to review daily operations, special projects, and facilities maintenance

Managed driver qualification files to ensure compliance with DOT regulations

Assumed responsibility for all driver operations during absences of the Supervisor

Monitored facility safety parameters for compliance with OSHA and corporate requirements; conducted audits of safety regulations, damages, and service levels

Maintained driver qualification files

Accomplishments

Two percent increase to profit margin to bottom line

Increased route efficiency of each route increasing driver availability

Increased oversight of vehicle inspection and maintenance to reduce downtime across the fleet.

100% compliance on all driver qualification files WARFAB, INC., HALLSVILLE, TX

Onsite Safety Representative, 02/2008 – 02/2012

Job Duties

Construction mechanical maintenance company serving the energy industry, performed daily onsite safety inspections to ensure compliance with OSHA, MSHA, and DOT regulations

Updated safety programs to reduce reportable incidents

Conducted annual OSHA and MSHA training as well as site-specific training for management and labor

Wrote daily reports on out-of-compliance issues and worked with management on development and implementation of corrective actions

Served as company Safety SME and liaison to customers

Managed time reporting for all employees

Accomplishment

Completed nine-month construction project without serious incidents

Trained two new employees to be field safety representatives and conduct thorough inspections for safety and compliance

Chosen to represent company for a major client because of my outstanding performance with past customers

SHAUN M. CRAWFORD PAGE FOUR OF FOUR

EARLIER RELEVANT EXPERIENCE

ALLIED WASTE SERVICES, SCOTTSDALE, AZ

Operations Manager, Division Safety Representative, Hauling Operations Manager, Driver Trainer, and Truck Driver 2002 – 2008

EDUCATION AND DEVELOPMENT

B.S. Occupational Safety and Health – Columbia Southern University, Orange Beach, AL, 2019 A.S., Environmental Health and Safety Technology – Texas State Technical College, Waco, TX, 2002 General Studies – Kilgore College, Kilgore, TX, 1998 – 1999 Class A/B Underground Storage Tank Operators Course – Texas Petroleum Marketers and Convenience Store Association, 2013

Smith Systems Driving Instructor Course, 2013T

Behind the Wheel Instructor Course – Republic Waste Services, 2012 30-Hour OSHA Training – American Safety Training, Inc., 2006 Caterpillar Train the Trainer, 2006

Supervisor Safety Training – Allied Waste Services, 2005 Hazardous Material Specialist 24-Hour Course – Texas State Technical College, 2001 Hazwoper 40-Hour Training – Texas State Technical College, 2001 S-Cam Brake Maintenance – Haldex Midland Services, 2000 CERTIFICATIONS

Certified Safety Professional (CSP), 2018

Methane Detection and Oxygen Deficiency Certified – US Department of Labor Mine, Safety, and Health Administration, 2012

US Department of Labor Mine, Safety, and Health Administration Instructor’s Card, 2011 US Department of Labor, MSHA Surface Supervisor Certification, 2015 First Aid / AED / CPR Certified, 2002/2013/2015/2017/2019 Refrigerant Recovery Certified – International Mobile Air Conditioning Association, 2000 OSHA 10 General Industry/OSHA 30 General Industry, 2001/2014 Introduction to Pipeline Safety, 2014

U.S. Department of Labor Surface Certified Supervisor, 2015 OSHA 10 Construction/ OSHA 30 Construction, 2015

Hydrogen Sulfide Safety Awareness, 2015

Recordkeeping and Workers Compensation, 2015

Driving Distractions and Safety Awareness, 2015

Crosby Rigging Train the Trainer, 2016

Dot Compliance Training, 2017

REFERENCES

Available upon request

Contact this candidate