CU

RRICULUM

VITAE

OF

MUHAMMED ZAIN

ABDOOL KADER

PERSONAL DETAILS

First Name: Muhammed Zain

Surname: Abdool Kader

Preferred name: Zain

Gender: Male

Date of Birth: 31-May-88

ID Number: 880**********

Nationality: South African

Passport Number: A04952783

Expiry date of passport: 01/10/2025

Physical Address: 222 The Meridian, 160 A G De Witt Drive, Bedforview, Germiston, 1401

Contact Number: 061-***-**** - Cell

067-***-**** – Alternate Cell

Email Address: ado8li@r.postjobfree.com

Alternate email: ado8li@r.postjobfree.com

Health: Excellent

Driver’s License: Code 08

Marital Status: Married

Languages spoken: English

Next of Kin’s Name: Preola Abdool Kader

Next of Kin’s Contact Number: 061-***-****

Next of Kin’s Relationship: Wife

EDUCATION

2005

Secondary School Attended: Isipingo Secondary School Subjects Passed: English

Afrikaans

Computer studies

Accounting

Mathematics

Physical Science

POST MATRIC QUALIFICATIONS

2019

International Institute of Welding (IIW)

Course Studied: Standard Level (IWIP)

Status: Passed

2018

South African Institute of Welding (SAIW)

Course Studied: Senior Welding and Fabrication Inspector - Level 2 Status: Passed

2015

South African Institute of Welding (SAIW)

Course Studied: Welding Inspection Level 1

Status: Passed

2015

I.R.C.A

Course Studied: Legal Liabilities for Supervisors

Status: Passed

2012

Nelson Mandela Metropolitan University

Course Studied: Ionizing Radiation and Radiation Safety Principles

(DOH)

Status: Passed

2012

AFRICAN N.D.T.

Course Studied: Radiographic Inspection Level 2 with interpretation Status: Passed

2011

N.A.S.A. NDT

Course Studied: Liquid Penetrant Inspection Level 1 & 2 Magnetic Particle Inspection Level 1 &

2

Status: Passed

EXECUTIVE SUMMARY

I am a self-driven individual with a determination to succeed. My practical and theoretical knowledge herewith displayed ensures that I am adequately competent to deliver superior quality to any task put forth to me within my professional capability. My astute stakeholder engagement and management skills have contributed to my previous successes, which I look forward to carrying over into my new position. I am constantly looking to further develop and an opportunity to work for your organization ignites this drive. I am meticulous, efficient, self-motivated, and responsible but above all else I maintain a positive and energetic attitude which encompasses honesty and integrity, attributes which remain the underlying success of your organisation. PROFESSIONAL EXPERIENCE

1. Three Tier Construction Pty Ltd (26 July 2021 to date) (Ecolean recovery boiler rebuild Project Mondi Richards Bay)

Job Description: QA/ QC Inspector.

● Witness and inspection fabrication and site activities ensuring that project specifications are built to requirements.

● Conduct daily inspection, monitoring and surveillance activities both fabrication and site which involves safety, piping activities, material and equipment preservation, proper implementation of approved welding procedures and specification is being carried out to jobsite.

● Conduct daily inspection for lay out and cutting, fit-up, material inspection, dimensional, spool release activities prior to painting.

● Coordinate with the NDT subcontractor regarding RT joint, MT/PT joint, UT joint and PWHT joint. Witness hardness test execution, positive material inspection, penetrant test and magnetic particle inspection.

● Review and conduct line check inspection to ensure it complies with Engineering and Quality requirements, prepare punch list, punch list clearing on test package issued to subcontractor prior to release for testing.

● Witness and inspection hydro testing and pneumatic test inspection to ensure that all requirements meet the project specification standards.

● Witness and inspection reinstatement and close out activities of piping systems after completion of test as per approved drawings, specification, and commissioning requirements.

● Witness and inspection reinstatement and close out activities of piping systems after completion of test as per approved drawings, specification, and commissioning requirements. Conduct final inspection for system mechanical completion and prepare punch list for those did not comply with company requirement and final verification upon correction for final approval.

Contact person: Martin Adams (Manager)

Tel: 061-***-****

2. RPC Inspection and Lab Services (27 January 2021 to 23 July 2021) Job Description: QA/QC Inspector.

● Witness the specific inspection/ testing to ensure the conformity of the equipment with the required specifications;

● Calibration – Review of the documentation;

● Quality documents – Obtain and review “Approved” vendor’s quality documents;

● Compiling Reports – Detailing of the services performed and results thereof, non- conformity reporting when unsatisfactory points are found, indicating discrepancies and rejections, and indicating corrective actions.

● Meeting and Coordination – Attending pre-inspection, in progress and final inspection meetings.

● Coordinate to obtain and review inspection documents, inspection procedure, fabrication and inspection schedules to perform services in a timely manner. Contact person: M Hassan (Manager)

Tel: +86-187-****-****

Reason for Leaving: Growth and better opportunities. 3. EMESA Assembly Spain. (23 March 2020 to 18 December 2020) Job Description: QA/QC Manager at the Zeerust PV project. In charge of overall quality assurance/control for EMESA and supervising of quality inspectors. Witnessing of various commissioning activities. Overseeing of all quality activities done by sub-contractors. Writing of procedures for client approval. Liaising directly with client regarding quality issue ie. NCR’s, reports etc. Contact person: Nestor Fuentez (Site Manager)

Tel: 084-***-****

4. CAST Rope Access and Inspection - Transnet Agriport ThyssenKrupp ship loader crane repair(01 October 2019 – 29 February 2020) Job Description: QA/QC Inspector (Mechanical, Welding & Fabrication) Compiling of Data Packs. Carrying out Surveillance Inspections Before, during and after Various Activities. Compiling Inspection Reports. Reviewing Sub-Contractors Documentation. Supervising of Welding Staff. Working closely with ThyssenKrupp Project managers Brian Mashabela and Gareth Browne regarding all quality aspects and Issues.

Contact person: Kelwyn Pillay (Inspection Coordinator) Tel: 072-***-****

Reason for Leaving: End of contract

5. Stanley Inspection South Africa (Pty) Ltd – SASOL Secunda (24 August 2019 – 17 September 2019)

Job Description: QC Supervisor

Supervising QC Inspectors and NDE technicians. Carrying out material identification with the welding specialist and AIA. Compiling and reviewing of fabrication test plansfor PRA and VRA packs for AIA approval. Inspection on fabrication of welds, vessels and tanks from fit-up to final visual. Carrying out welding surveillance reports before, during and after welding. Carrying out NDE’s on welds in the workshop and field. Witnessing of hydro and pneumatic pressure tests with AIA. Time management of NDE technicians (RT, MT, PT) and QC Inspectors. Issuing of non-conformances to relevant personnel if not conforming to WPS and code requirements. Attending daily progress meetings with SASOL management and discussing SASOL procedures with AIA and welding team. Contact person: Madeleen Stanger (QC Lead)

Tel: 076-***-****

Reason for Leaving: End of contract

6. Dekra Industrial RSA – Sapref Refinery (11 June 2019 – 19 July 2019) Job Description: NDT Area Lead

Managing of Supervision staff and NDT technicians on the Sapref TA 2019. Attending daily progress meetings with Sapref Inspection Managers and Various MMC Management. Preparing inspection reports according to the relevant codes and Standards

(ASME/ SANS/ API/ EN). Attending daily safety meetings with Sapref HSSE department and other service providers. Assisting Sapref inspection staff with planning tasks and inspections on equipment, piping and vessels. Reviewing of all NDT Reports and Radiographic films.

Contact person: Stephens Maswanganyi (NDT Manager – Durban) Tel: 031-***-****

Reason for Leaving: End of contract

7. OCA International (South Africa) (1 February 2018 – 2 November 2018) Job Description: QC/QA Quality Inspector/supervisor (welding & Fabrication) and Radiographic Interpreter for the EPC contractor at the Ilanga CSP1 concentrated Solar Power Plant.

Developing and maintaining the QMS (Quality Management System). Conducting reviews on sub- contractors’ quality documents. Assuring sub-contractors carry out various activities according to relevant quality procedures and Quality Management Plan. Reviewing of all quality dossiers, and NDE examination results. Witnessing of all pressure testing activities on site. Reviewing of all radiographic films according to procedure and code specifications. Carrying out daily site surveillance inspections and reporting on these inspections. Lead inspector for the fabrication of the hot and cold salt tanks. Punching of piping systems and witnessing pressure testing to make sure all parameters are met. Documental Reviews for all final Dossiers of all sub-contractors. Witnessing of various commissioning activities.

Contact person: Josep Pujol (Country

Manager) Tel: 061-***-****

Reason for Leaving: End of contract

8. OCA International (South Africa) (16 August 2017 – 13 December 2017) Job Description: QC/ QA Quality Inspector/supervisor (welding & Fabrication) and Radiographic Interpreter for the EPC contractor at the Kathu concentrated Solar Park

Developing and maintaining the QMS (Quality Management System). Conducting reviews on sub- contractors’ quality documents. Assuring sub-contractors carry out various activities according to relevant quality procedures and Quality Management Plan. Reviewing of all quality dossiers, and NDE examination results. Witnessing of all pressure testing activities on site. Reviewing of all radiographic films according to procedure and code specifications. Carrying out daily site surveillance inspections and reporting on these inspections. Lead inspector for the fabrication of the hot and cold salt tanks. Punching of piping systems and witnessing pressure testing to make sure all parameters are met. Documental Reviews for all final Dossiers of all sub-contractors. Witnessing of various commissioning activities.

Contact person: Josep Pujol (Country

Manager) Tel: 061-***-****

Reason for Leaving: End of contract

9. Dekra Industrial RSA (21 July 2017 – 14 August 2017) Job Description: QC Inspector (welding & Fabrication) with NDE (SASOL Secunda)

Carrying out material identification with the welding specialist and AIA. Compiling and reviewing of fabrication test plans for PRA and VRA packs for AIA approval. Inspection on fabrication of welds, vessels and tanks from fit-up to final visual. Carrying out welding surveillance reports before, during and after welding. Carrying out NDE’s on welds in the workshop and field. Witnessing of hydro and pneumatic pressure tests with AIA. Time management of NDE technicians (RT, MT, PT). Issuing of non-conformances to relevant personnel if not conforming to WPS and code requirements. Attending daily progress meetings with SASOL management and discussing SASOL procedures with AIA and welding team.

Contact person: Madeleen Stanger (QC Supervisor)

Tel: 076-***-****

Reason for Leaving: Growth and better opportunities 10. Dekra Industrial RSA (20 November 2016 – 27 June 2017) Job Description: Senior NDT Technician (Sapref Refinery) Carrying out various disciplines of NDT (RT, MT, PT, HT, WT & PMI). Working numerous projects at Sapref (corrosion review project/ H11D project/ CUI- Pre- construction project/ TA 2017). Preparing inspection reports according to the relevant codes and Standards

(ASME/ SANS/ API/ EN). Attending daily safety meetings with Sapref HSSE department and other service providers, as well as daily progress meetings. Assisting Sapref inspection staff with planning tasks and inspections on equipment,piping and vessels. Contact person: Stephens Maswanganyi (NDT Manager – Durban) Tel: 031-***-****

Reason for Leaving: End of contract

11. Dekra Industrial RSA (22 August 2016 – 18 September 2016) Job Description: QC Inspector (welding & Fabrication) with NDE (SASOL Secunda) Carrying out material identification with the welding specialist and AIA. Compiling and reviewing of fabrication test plans for PRA and VRA packs for AIA approval. Inspection on fabrication of welds, vessels and tanks from fit-up to final visual. Carrying outwelding surveillance reports before, during and after welding. Carrying out NDE’s on welds in the workshop and field. Witnessing of hydro and pneumatic pressure tests with AIA. Time management of NDE technicians (RT, MT, PT). Issuing of non-conformancesto relevant personnel if not conforming to WPS and code requirements. Attending daily progress meetings with SASOL management and discussing SASOL procedures with AIA and welding team.

Contact person: Madeleen Stanger (QC Supervisor)

Tel: 076-***-****

Reason for Leaving: End of contract

12. Associated Marine and Industrial Inspection Services (AMIIS) (August 2010 – 20 August 2016)

Job Description: Senior NDT Technician and Welding & Fabrication Inspector SNT-TC-1A-MTII

SNT-TC-1A-PTII

SNT-TC-1A RTII

Supervised 25 Surface Technicians on the 2010 and 20 Surface technicians on the 2011 turn around at Sapref and Engen refineries. Worked on various sites as a senior MT/ PT and RT technician as well as a site supervisor on the various sites listed below. Carries out visual inspections for welder’s qualifications and PQR’s according to code specifications. Carrying out various tankage inspections. Inspecting all materials and equipment/ products according to specifications at various stages of manufacture and performing PMI (post material identification). Keeping files of all records, preparing inspection reports and raising non-conformities. Submission of inspection reports and findings of non- conformities to the relevant personnel. Involved in weekly quality meetings regarding company quality policy and monitoring of the various projects progress. INDUSTRIAL SITES AND PROCESS PLANTS WORKED ON:

Engen(Sasol Wax/ South And North

Complex Exxaro Kzn Sands

Sappi Saiccor (Amakhulu

Project Sappi Mandini

Sappi Stanger

Assmang Manganese

Aeci

Illovo Sugar Mill (Nakambala

Zambia) Mondi Shanduka

Nestle (Estcourt & Harrismith)

Lethabo Power Station Division Of Eskom

Revertex Chemicals

Evertrade Feeds

Sapref (Alkalation Turnaround 2010)

Sapref (South Zone Turnaround 2011)

Shell Chemicals South Africa

Royal Swaziland Sugar Corperation

Ubombo Sugarmill (Swaziland)

Kilombero Sugar Company

(Tanzania)

Gateway Industries (Tsumeb Copper Smelter Namibia) Contact Person: S John (Manager)

Tel: 061-***-****

Reason for Leaving: Growth and better opportunities 13. Westward Technical Services (December 2008- August 2009) Job Description: Technician

Compiling of data packs, developing inspection test plans and quality control plans. Supporting my manager in preparation of safety files. Worked on cooling systems for generators at various Eskom Power Stations around Gauteng & Mpumalanga. Worked as a senior technician at Eskom Uganda limited. Worked on the re-build of Komati Power Station, Camden Power Station, Hendrina Power Station, Grootvlei, Matla & Kreil Power Station. (2008-2009)

Contact Person: S. Poonsamy (Project

Manager) Tel: 084-***-****

Reason for Leaving: End of contract

14. Kentz Engineering & Construction (April 2006- September 2008) Job Description: Material Controller

Running of all stores & company assets on site (Engen Refinery) on various turnarounds. Supervising between 30-40 storeman & assistants throughout these turnarounds. Worked on the north complex TA (2006-2007), Alky fire re-build (2007), MEK shutdown (2007), Combo & north complex shutdown (2008), Safor & south complexShutdown (2008).

.

Contact Person: S. Parmasur (Materials Control Manager) Tel: 073-***-****

Reason for Leaving: End of contract

SPORTING ACHIEVEMENTS

Cricket Represented my school

Volleyball Represented my school, Province (KZN) and Country (SA) Swimming Represented my school and Province (KZN)

Contact this candidate