Energy Services Hydro
Resume:
Terry Hooper
** ****** ***** ****, ******, NL A*K 0B2 ● C: 709-***-**** / H: 709-***-**** ● *************@*****.**
QA/QC Inspector ● Certified API 510/570/1169/In-Service Pressure Equipment/Level 2 CWB Inspector/CWI Inspector
Procedure Development ~ QA Audits & Surveillance ~ Leadership ~ Turnover Coordination
Profile
Offer more than 20 years’ quality management experience in the oil/gas industry.
Knowledge of API practices and ASME standards.
Experienced in Shutdowns, new construction, in-service piping/equipment as quality control and quality assurance inspector.
Ensure the PEIMS program for piping and mechanical is being implemented.
Skilled in compiling Turnover documentation, Repair requests for mechanical equipment/piping, developing Inspection and Test plans.
Able to inspect workplace equipment/piping and practices to ensure consistent adherence to government regulations.
Considerable strengths in team building, personnel leadership, and development, and effectively interfacing with personnel.
Professional Experience
Suncor Spring/Fall TA Aug-Present 2021
API 510/570 Inspector
Visual internal/external inspection completed on furnaces as per applicable checklist. Repair request populated based upon visual findings.
Audited/monitored sub-contractors’ scope of work in the field, document review of Turnover packages for piping.
Approved ITP’s, reviewed NDE/PWHT reports, witness hydro testing of furnace convection/radiant sections of furnaces.
Inspected PSV’s and compile required documentation to ensure PSV met code requirements.
Co-op Refinery Spring TA, April-June 2021
API 510 Inspector
Monitored the welding repairs/WCO overlay, witness hydro testing, reviewed turnover documentation, signed ITP’s witness/hold points of exchangers, vessels, and chokers.
Audited/monitored sub-contractors’ scope of work in the field and document review of Turnover packages.
CNRL June 2019-April 2021
Asset Integrity, Froth Unit Inspector
ABSA In-service inspector for vessels, exchangers, and pressure piping.
Monitoring the corrosion rates (short and long term) and remaining life as per API 510, 570 for equipment and piping systems by reviewing NDE thickness survey reports and performing applicable calculations.
Approve Inspection and Test Plans for work packages prior to the commencement of field work, witness hydro test, performs final walk downs and final sign-off of work packages for piping circuits and equipment.
Performs internal/external Visual Inspection on piping circuits and equipment as per Inspection scopes, generating IWR’s for repair work and Inspection reports.
Implementation of the equipment, piping and PSV program as per ABSA 506/513 for inspection intervals, repair work, completion of regulatory documentation such AB-40’s and AB-83’s.
Monitoring KPI’s, ensure KPI’s are completed as per requested dates.
Advised the maintenance department with fabrication discrepancies, material receiving, code requirements for fabrication, pre-planning of Turnarounds and acted as QA lead.
Audited/monitored sub-contractors’ scope of work in the field and review documentation of Turnover packages.
Continued …
Professional Experience continued … Terry Hooper – Page 2 of 3
CNRL, Feb 2019-June 2019
Asset Integrity Inspector
Review exchangers, vessels and various equipment history, verifying that the inspection requirements/intervals have met RP API 510 and AB-506 since being commissioned.
Generating Inspection Task (work scopes) based upon the review of Integrity Reports along with the history to capture External/Internal inspections approaching the required interval inspection dates, missing NDE such as UT Thickness readings, Eddie Current.
Performing on-line external inspections as per API 510.
Suncor Turnaround, Spring and Fall Jan 2018-Oct 2018
QA Inspector
Pre-planning prior to the commencement of the Turnaround.
Visually inspected furnaces, equipment internally and externally as per Inspection Scopes, generated reports based upon inspection findings, monitored the repair work and completed final sign-off of ITP’s and NDE reports.
Inspected PSV’s and compile required documentation to ensure PSV met code requirements.
Audited/monitored sub-contractors’ scope of work in the field and document review of Turnover packages.
Applied a sharp eye for detail toward approving inspection and test plans (ITPs) based on scope of work.
Performed final walk-down on piping systems, generated punch list for required work, witnessed hydro test, verified completion of punch list items, and performed final checks on systems prior to turnover to client.
Inspected flange faces as per ASME PCC-1.
Suncor Spring/Fall Turnaround, Apr-Dec 2017
QA Inspector
Pre-planning prior to the commencement of the Turnaround.
Audited/monitored sub-contractors’ scope of work in the field and document review of Turnover packages.
Visually inspected furnaces, equipment internally and externally as per Inspection Scopes, generated reports based upon inspection findings, monitored the repair work and completed final sign-off of ITP’s and NDE reports.
Inspected PSV’s and compile required documentation to ensure PSV met code requirements.
Supervised efforts of subcontractors, prepared repair requests, and submitted quality surveillance reports to verify compliance with established requirements.
Performed final walk-down on piping systems, generated punch list for required work, witnessed hydro test, verified completion of punch list items, and performed final checks on systems prior to turnover to client.
Played an integral role in hydrogen reformer rebuild by witnessing bolt-ups, conducting in-depth visual inspection of critical joints, performing pneumatic testing, administering sign-off of hold points on ITP, monitoring welding activities, review of final NDE and PWHT reports.
Inspected flange faces as per ASME PCC-1.
Acuren - Suncor Fall Turnaround, Aug – Oct 2016
QA Inspector
Pre-planning prior to the commencement of the Turnaround.
Audited/monitored sub-contractors’ scope of work in the field and document review of Turnover packages.
Applied a sharp eye for detail toward approving inspection and test plans (ITPs) based on scope of work.
Played an integral role in hydrogen reformer rebuild by witnessing bolt-ups, conducting in-depth visual inspection of critical joints, performing pneumatic testing, administering sign-off of hold points on ITP, monitoring welding activities, review of final NDE and PWHT reports.
Supervised efforts of subcontractors, prepared repair requests, and submitted quality surveillance reports to verify compliance with established requirements.
Owner’s Inspection Services - Suncor Spring Turnaround, Mar – Jun 2016
QA Inspector
Pre-planning prior to the commencement of the Turnaround.
Audited/monitored sub-contractors’ scope of work in the field and document review of Turnover packages.
Spearheaded QA by approving ITPs, auditing subcontractors’ field activities, witnessing hydro test and torqueing, overseeing final walk-down on piping systems, and authorizing final sign-off of inspection and test plans.
Continued …
Professional Experience continued … Terry Hooper – Page 3 of 3
Williams Energy - Williams Horizon Offgas ULC, Nov – Dec 2015
QA Inspector
Performed final walk-down on piping systems, generated punch list for required work, witnessed hydro test, verified completion of punch list items, and performed final checks on systems prior to turnover to client.
Roevin Technical Services - Suncor Fall Turnaround, Sep – Nov 2015
QA Coordinator (Piping and Furnaces)
Pre-planning prior to the commencement of the Turnaround.
Audited/monitored sub-contractors’ scope of work in the field and document review of Turnover packages.
Administered in-depth preliminary inspections on piping and furnaces, compiled repair requests, and authored quality surveillance reports based on results of inspections.
Audited subcontractor field performance, witnessed hydro test and torquing, held crucial accountability for final walk-down on packages, and managed sign-off on turnover documentation.
Strike Energy Services - AOC SAGD Plant, Oct 2014 – Mar 2015
Turnover Lead
Assembled turnover binders/documentation according to precise client requirements and scope of work.
Confirmed accuracy of documentation completed during construction to authorize sign-off of ITP.
DFB Driver - Commissioning LHPP, Apr – Oct 2014
Quality Lead
Formulated ITP, delegated tasks to Quality staff members, and closely monitored field activities such as welding, hydro testing, and final walk-downs on piping systems.
Quality Lead, Orphan Industries, Preliminary Work for SEA, Aug 2013 – Mar 2014
Championed preparation of PQRs, supervised welding of PQR coupons, scheduled NDE, and closely reviewed documentation for quality requirements prior to submission to CWB and client for acceptance.
Applus RTD - Suncor Turnaround (6F2 furnace upgrade), Apr – Jun 2013
QA Mechanical / Piping Coordinator
Meticulously produced repair reports upon inspection of existing equipment and piping, and validated work was completed according to directives to meet QA requirements.
Audited/monitored sub-contractors’ scope of work in the field and document review of Turnover packages.
Oversaw torqueing of flanges, hydro and pneumatic testing, final walk-downs, visual inspections of welding, ITP sign-offs, and sign-off of hold points.
Strike Energy Services - Shell Waterton Optimization Project, May 2007 – Nov 2008
QC Manager
Applied dynamic leadership talents toward directing, supervising, mentoring, and motivating Quality department employees in conducting visual inspections, hydro testing, and turnover preparations.
Orchestrated installation of rotating equipment as per API 686 and created ITPs for piping systems
Education & Certifications
CWB Level 2 Certification, Canadian Standards Association, Standard W178.2, Endorsements: B31.3, W47/W59,
ASME VIII (Div. 1) & IX, Z662-15
Canadian Welding Bureau (Welding Supervisor) Certification
Certified Welding Inspector.
API 510/570/1169/In-Service Pressure Equipment Inspector ● Certified ISO 9001:2008 Internal Auditor ● Leadership for Safety Excellence Certification
Diploma, Welding Engineering Technician
Contact this candidate