A Mechanical Engineer with a year of experience specializing in

in Project Management, installation of Fire Protection in the

Philippines, and facilities operation and maintenance,

Seeking a challenging career with progressive organization that

provides an opportunity to capitalize my technical, analytical and

leadership abilities in the field of Mechanical Engineering.

PROFESSIONAL EXPERIENCE

Project Engineer (October 2020 to Present)

Technology Builders and Management Corporation

JOB DESCRIPTION

Discuss and study the new project with the project team regarding the plan and details of the incoming project.

Coordinate with the draftsman regarding the design or propose plan of the project.

Create Bill of Materials in line with the proposed project plan from the draftsman.

Create in-house estimate based on the proposed plan.

Request for the project leader to PR the project.

Once PR is approved, coordinate with the procurement to invite suppliers to attend a pre-bid meeting for the project.

Preside a pre-bid meeting to discuss the project. (provide drawing or conduct

a site inspection if needed)

Evaluate the quotation of the suppliers to award the project.

Communicate with the owner and the contractor to start the project.

Monitors works in progress and prepares weekly accomplishment report of the project status.

Ensure the quality of work and ensure that the project is delivered on time scheduled.

Assist the project head on the coordination and daily supervision of site.

Assist the project head for testing and commissioning of the project.

Create documents for all testing and other activities

Close the punch-list and turnover the project to the owner.

PROJECT ACCOMPLISHED

Nutri-Asia Cabuyao Plant

Supply and installation of SDI Platform

Supply and installation of 4x Batching Tank

Supply and installation of 3x Holding tank

Supply and installation of Steam Direct Injection (SDI) for line 6

Hauling and final positioning of Horizontal Form Fill and Seal (HFFS) for line 5

Hauling and final positioning of Horizontal Form Fill and Seal (HFFS) for line 6

Supply and installation of Spiral Cooling Tower for Line 5

Supply and installation of Spiral Cooling Tower for Line 6

Supply and installation of Outfeed conveyor from filler to cooling tunnel line 5

Supply and installation of Outfeed conveyor from filler to cooling tunnel line 6

Supply and installation of 4x Chiller for spiral cooling tunnel

Supply and installation of 2x Evaporator for spiral cooling tunnel

Construction of New Engineering office and bundling area

New VMS for Nutri-Asia Cabuyao Plant

Mechanical Project Engineer (November 2018 to March 2020)

Nexperia Philippines Inc (City Service Corporation)

JOB DESCRIPTION

Receive the layout and project memo from the IE and study the upcoming project.

Create Bill of Materials in line with the proposed project plan from IE.

Create in-house estimate based on the proposed plan.

Coordinate with the procurement to invite suppliers to attend a pre-bid meeting for the project.

Preside a pre-bid meeting to discuss the project. (provide drawing or conduct a site inspection if needed)

Call for a clarification meeting regarding the quotation of the contractor if they meet the client’s requirement and standards.

Evaluate the quotation of the suppliers to award the project.

Communicate with the owner and the contractor to start the project.

Monitors works in progress and prepares weekly accomplishment report of the project status.

Monitoring of the contractor’s daily activity and verify if they comply with safety standards.

Ensure the quality of work and ensure that the project is delivered on time scheduled.

Assist the project head on the coordination and daily supervision of site.

Assist the project head for testing and commissioning of the project.

Create documents for all testing and other activities

Inspect the quality and conformance of the actual project based on the plan. List down all the punchlist of the project based on the standard installation.

Closed the punchlist then endorse to the end user.

PROJECT ACCOMPLISHED

Plating Air Scrubber Project

Cooling Tower Replacement and Rehabilitation

Replacement of AHU 12 and AHU 17

10k Conversion of Former Flux Clean Area

New Facilities Workshop Project

HVAC Efficiency Project for Admin

Supply and Installation of 2x Transformer Deluge System @ Energy Building

Supply and Installation of Fire Sprinkler System for Materials Recovery Facilities

Dismantling of Former Sensors Office Project

Materials Pre-assy Relayout

Spareparts Room Relayout

Central Die Processing Merging

Supply and Installation of 2x New AHU for CDP

Supply and Installation of Supply and Return Plenum for CDP

Interconnection of NLFPAK and CDP Return and Supply Plenum

New Exhaust System for CDP

Additional Split type Aircon for Arena

Additional Split type Aircon for Foyer

Supply and Installation of Smardt Chiller and VFD Pumps

Stencil 3s Project

Q4 Firewall Project

Magazine Wash Expansion

LFPAK Wave 19

HVAC Design for Wave 19

LFPAK Ramp Part 1

HVAC Design for LFPAK Ramp Part 1

LFPAK Ramp Part 2

HVAC Design for LFPAK Ramp Part 2

PROFESSIONAL EXPERIENCE

Project Engineer (November 2017 to November 2018)

Technology Builders and Management Corporation

JOB DESCRIPTION

Discuss and study the new project with the project team regarding the plan and details of the incoming project.

Coordinate with the draftsman regarding the design or propose plan of the project.

Create Bill of Materials in line with the proposed project plan from the draftsman.

Create in-house estimate based on the proposed plan.

Request for the project leader to PR the project.

Once PR is approved, coordinate with the procurement to invite suppliers to attend a pre-bid meeting for the project.

Preside a pre-bid meeting to discuss the project. (provide drawing or conduct

a site inspection if needed)

Evaluate the quotation of the suppliers to award the project.

Communicate with the owner and the contractor to start the project.

Monitors works in progress and prepares weekly accomplishment report of the project status.

Ensure the quality of work and ensure that the project is delivered on time scheduled.

Assist the project head on the coordination and daily supervision of site.

Assist the project head for testing and commissioning of the project.

Create documents for all testing and other activities

Close the punch-list and turnover the project to the owner.

PROJECT ACCOMPLISHED

Pepsi Cola Products Philippines Inc

Bottle Washer Final Rinse Water Recovery System

Back Wash Final Rinse Water Recovery System

CIP Final Rinse Water Recovery System

Mondelez International Philippines

Supply and Installation of Methane Gas Flare System for WWTP

Warehouse Lighting Improvement

Nestle Tanauan

BBPMD Line 1 Project

oSupply and Installation of Packing Platform

oSupply and Installation of Filling Platform

oVarious Mechanical and Civil Works from Dry Tipping to Filling Silo

oSupply and Installation of Filling Silo

oHauling and Final Positioning of Filler Machine

BBPMD Line 6 Project

oSupply and Installation of Filling Silo

oVarious Mechanical and Civil Works from Dry Tipping to Filling Silo

oDirect Filling Project for Line 6

oSupply and Installation of Packing Platform

oSupply and Installation of Filling Platform

oHauling and Final Positioning of Filler Machine

Project Engineer (September 2016 to November 2017)

Palmer Asia Inc.(ISO 9001:2015 Certified)

JOB DESCRIPTION

Received, Discuss and study the new project with the design team regarding the proposed plan and details of the project.

Assists in preparation and implementation of assigned fire protection project.

Monitors works in progress and prepares weekly accomplishment report of the project status.

Ensure all procedures, plans, revisions and reports are submitted to the project manager for

review and approval.

Assist the project head on the coordination and daily supervision of site.

Prepares progress billing of every project.

Monitor quality and ensure smooth work progress.

Coordinate with other engineering disciplines in design aspects of the project.

Request for additional materials necessary for the completion of the project.

Coordinates materials delivery, receiving and checking at construction site.

Monitor compliance to applicable codes, practices and specifications.

Maintains safe and clean working environment by enforcing procedures, rules and regulations.

Contact authorities for the Fire Safety Inspection Certificate (FSIC) requirements and issuance.

PROJECT ACCOMPLISHED

Installation of Fire Hydrant in Republic Cement Iligan Inc.

Installation of AFSS in Republic Cement Iligan Inc.

Installation of FM200 Suppression System for Control room, Electrical

room and computer room Maibarara Geothermal Power Plant

Installation of Automatic Fire Sprinkler System for Control Annex Bldg in

Maibarara Geothermal Power Plant

Installation of Deluge Fire Suppression System for two transformer in

Maibarara Geothermal Power Plant

Installation of Automatic Kitchen Fire Suppression System in Family Mart

Boni Stop Over, BGC Taguig City

Installation of Automatic Kitchen Fire Suppression System in Family Mart

BGC Corporate Bldg, BGC Taguig City

CAD Engineer (January 2016 to September 2016)

TS Tech Business Services Philippines, Inc.

JOB DESCRIPTION

Discuss and study the new project with the team.

Target setting with the team and manager to meet the company’s quota.

Project planning on distributing the project and to set the schedule for each project.

Creation of 3D model and 2D drawing using CATIA V5 part design and generative surface design. The 3D model and 2D drawing is base on client’s standard and specification.

Check the 3D model and 2D drawing if they are correct and on client’s standard and specification.

Create documentation for the projects to manage and verify if the we meet the timing and schedule.

CAD Operator (June 2012 to June 2013)

Planex Technology Inc.

JOB DESCRIPTION

Discuss and study the new project with the team.

Target setting with the team and manager to meet the company’s quota.

Project planning on distributing the project and to set the schedule for each project.

Creation of 3D model and 2D drawing using CATIA V5 part design and generative surface design. The 3D model and 2D drawing is base on client’s standard and specification.

Check the 3D model and 2D drawing if they are correct and on client’s standard and specification.

Create documentation for the projects to manage and verify if the we meet the timing and schedule.

On The Job Training (June 2014 to September 2014)

Sunstar Mall Santa Cruz, Laguna

JOB DESCRIPTION

Assist the Engineer to Maintain a log of operational data and historical list of repairs for all building equipment

Assist the Engineer to Implement a comprehensive conservation program to reduce material and energy cost

Assist the Engineer to Provide technical assistance to mall tenants to ensure continuous business operations

Assist the Engineer to Comply with all local administrative and environmental requirements and laws

Assist the Engineer to Conduct and document regular material and equipment audit and ensure completeness

Assist the Engineer to Ensure that the mall security and safety facilities are properly maintain and fully operational.

CERTIFICATION, SEMINAR AND TRAININGS ATTENDED

ME, Mechanical Engineer Board Passer(September 2015)

License No.: 0090222

Catia V5 Fundamentals

February 16, 17 and 18, 19, 22, 2016 (40 hrs)

MDC Office Alpap II Bldg, Ayala Alabang, Muntinlupa

EDUCATIONAL ATTAINMENT

BS in Mechanical Engineering (2009- 2015)

Laguna State Polytechnic University, SCC

Sta. Cruz, Laguna

CHARACTER REFERENCE

Engr. Vhincent Paul Ylanan, M.E. Riley Libatique

Palmer Asia Inc., Project Supervisor TBMC President

0925- 9115-937 091*-***-****

I, the undersigned applicant, have personally completed this application. I understand that any misrepresentation, falsification or omission of information on this application or on any document used to secure employment shall be grounds for rejection of this application.

Jimuel A. Salvador

Engr. Jimuel A. Salvador

PERSONAL INFO:

Age: 28 years old

Address:

Brgy. Gatid, Santa Cruz, Laguna

Contact No.:

0945 - 5178 – 380

E-mail:

ado6hi@r.postjobfree.com

SKILLS:

-Knowledge in P&ID

-Project Management

-Facilities Operations and Maintenance

-Computer Literate (Microsoft office)

-Basic knowledge in AutoCAD, and Catia v5

Contact this candidate