CURRICULUM VITAE
Schlumberger-Private
DEVI VARA PRASAD PULAGAM
Ph: +965-********(KUWAIT)
+91-766*******(IND)
E-Mail:
adnumz@r.postjobfree.com
SKYPE ID: prasadpdv23@skype
Personal Data
Sex : Male
Nationality : Indian
Passport number : K9090531
Permanent Address
S/o. china venkaiah naidu
Door No. 47-3/1
Above Hero showroom
Sri sai colony,chintal
Hmt road,Hyderabad
Telangana,India
PIN-500037.
Achevements :
My sincere efforts appreciated by the
client EXXON MOBIL(Mobil producing
Nigeria)
Professional Summary
A dynamic professional with over 15 years of rich & extensive experience in Commissioning and Maintenance of electrical system of Oil
& Gas plants and Power sector. Experience with reputable companies in the Middle-east, Africa & India
Education Profile
A) Bachelors of Technology (Electrical and Electronics Engineering) from DRK Institute of Science & technology, JNTU, Hyderabad. B) Diploma (Electrical and Electronics Engineering) from JNGP College,SBTET,Hyderabad
Working Experience
(1)Designation : ELCTRICAL MAINTENANCE LEAD (Rotation 42/21) Work span : From April/2018- present
Company : Schlumburger,KOC
(2)Designation : ELCTRICAL MAINTENANCE LEAD
Work span : From Oct/2016 to oct 2017
Company : GAMA POWER SYSTEM, POSCO E&C
(3)Designation : SENIOR SITE ENGINEER
Work span : From July 2013 to July 2016
Company : Sudelettra Nigeria Ltd,EXXON MOBIL
(4)Designation : SENIOR EXECUTIVE ENGINEER
Work span : From December 2010 to July 2013.
Company : R.K Electric Automation Limited,
(5)Designation : SITE ENGINEER
Work span : From Jan 2009 to Oct 2010
Company : PMF India limited
(6)Designation : ELECTRICAL INCHARGE
Work span : From Oct 2004 to December 2008
Company : ENERGY CONTROL SYSTEMS
CURRICULUM VITAE
Schlumberger-Private
Technical work Experience : Total 15 years
SCHLUMBURGER
ELECTRICAL LEAD / Apr 2018 – Present (Rotation 42/21) Schlumbergerger is a Leading EPC Contracting Company operations for Kuwait Oil Company in Up stream and Down strean oil and gas projects Project scope of work: JPF-2 East raudatain and EPF-15 Heavy oil production facility, Umm-niqa 4MW 3.3KV solar gas turbines -4nos, 4MW 3.3KV BSDG, 3.3kv/0.44KV transformers-8nos and HV switchgear and motors 0.8MW 440V Cater pillar gas Generators-4nos and 0.8MW 440V Diesel generator-1no 440V switch gear and motors Electrical Engineer responsible to look after Pre Commissioning and Commissioning activities of Electrical equipment’s as per client requirement.
Maintenance of 4MW 3.3KV solar gas turbines -4nos, 4MW 3.3KV BSDG, 3.3kv/0.44KV transformers-8nos and HV switchgear and motors
Maintenance of GAS GENERATORS (CATERPILLAR-4*800 KW) 3.2 MW, & EMERGENCY DESIEL GENERATOR (CATERPILLAR- 1*800 KW) Testing of Protection Relay Such as Under Voltage, Earth Fault, Restricted Earth Fault, Synchrony check, Synchronizing, Bus bar Protection, Motor Protection & Generator Protection Relay by Secondary and Primary Injection
Commissioning and Maintenance activities AC/ DC Uninterrupted power supply. Maintenance of cathodic protection system, Testing & Maintenance of 110 vac & 230 vac Sub-station equipment’s Protective relays and its Control Panels. Operation and Maintenance & Trouble Shooting of HV and LV Motors Schneider Electric VFD drives and PLC etc.
Tracks Key Performance Indicators (KPIs) and ensures KPI targets and results are communicated to the Maintenance Department staff effectively.
Operation and Maintenance & Trouble Shooting of LT Motors Soft starter, Operation and Maintenance of Direct-On-Line Starters / Reverse Direct-On-Line Starter, Control Circuits in Intelligent MCC interfaced with MCC I/O Panels, Routine checkup of Battery Banks, Battery Chargers & UPS
Ensures implementation of all audits and reports the status to concerned departments
Supervises, coordinates and participates in the activities of personnel in the routine electrical maintenance, overhaul, shutdown and breakdown repair of 3.3kv substation and plant equipment’s
Operation and Maintenance activities of COMPRESSOR (ATLAS COPCO 3*GA-250 & 2*GA-75) Trouble Shooting of control circuit in faulty contactor, timer relay, fuses, found to replaced.
Maintenance of all SRU and MRU packages
Implementation of CMMS (Computerized maintenance management software)for entire plant equipment’s as per company standards
Work experience at site as Lead Electrical Engineer level. Working Knowledge on flow products, DCS, PLC & SCADA system.
Knowledge of EX-maintenance and the application of ATEX standard 1999/92/EG and ATEX product standard 94/9/EG especially the application of ATEX equipment groups and temperature classes.
Able to understand P & I diagram, Process flow diagram, Functional Logic diagram and Cause & Effect Matrix.
Reviewing and fully understanding the intent, scope and quality requirements of work for the construction and Pre- commissioning works under area of responsibility
Conducting Preventive maintenance activity by daily monthly and Early basis as equipment manufacturer requirements
Corrective maintenance has been carried out at any time 24/7 with in the safety and quality regulations
Supervising matters related to commissioning and maintenance of electrical systems. Review & issue electrical equipment specifications and testing & commissioning procedures. Prepare method statements and risk assessments.
Schedule, plan and organize the work, organize meeting with contractor to review and de-bottleneck the schedule. CURRICULUM VITAE
Schlumberger-Private
Ensure compliance with KOC standards of HSSE systems in works carried out by all parties across sites. Monitor adherence to electrical isolation procedures as per company standards and maintain electrical isolation registers for all commissioning jobs. Co-ordination between engineering, Client and other departments.
Liaise with operation & maintenance personnel and ensure smooth execution of planned commissioning jobs.
Interface with QA/QC teams and ensure compliance of all installations with local codes & procedures. Witness & accept all pre-commissioning & commissioning activities of EPC contractor and review test documentation.
Contribute to the preparation of project documentation – as built drawings & diagrams, start-up operation & maintenance manuals, commissioning & start-up logs and construction work packs. Support start-up team in smooth execution of all jobs.
Manage the maintenance of commissioned HT/LT systems of the plant. Plan & implement predictive & preventive maintenance schedules to minimize breakdowns and maintain equipment history. Finalize scope of maintenance jobs, plan, and schedule, execute and close jobs.
Conducted interlock checks of all switchgear and modification of schemes. Reviewed & commented on commissioning engineer’s & vendor’s documentation. Verify the cable & termination schedules. GAMA POWER SYSTEMS (GPS)
ELECTRICAL LEAD / Oct 2016 – oct 2017 GPS is a Leading EPC Contracting Company operations Globally in oil and gas and power projects
Project scope of work: 2x150mw Khabat Oil and Gas power plant/ Client: POSCO Eng. & Contracting company, Erbil, Kurdistan
Supervises, coordinates and participates in the activities of personnel in the routine electrical maintenance, overhaul, shutdown and breakdown repair of 11KV/0.415kv substation and plant equipment’s
Pre-Comissioning,commissioning and maintenance of MV and LV switchgear,11/0.4kv substation
Testing and Maintenance of transformers,UPS panels,AC,DC Distribution panels,Lv switch gear & vfd panels,Mcc & Pcc panels, battery banks & cable tray installation and cable laying.
Implementation of CMMS for entire plant equipment’s as per company standards
Preparation and submission of MOC (Management of change ) and TQ (Technical quarry) SUDELETTRA NIGERIA LIMITED (SNL), PORTHARCOURT, NIGERIA. SENIOR SITE ENGINEER ELECTRICAL / JULY 2013 – July 2016-NL is a Leading EPC Contracting Company in NIGERIA in the Oil & Gas processing, Power Plants & Offshore Structre & Platform Fields Project 1: 2x20MW Siemens gas generators,QIT Gas Flare Elimination project/ Client: Exxon Mobil (mobil producing Nigeria) Project 2: Ebocha oil center revised EOC revamping phase2 project/Client: Nigerian Agip oil corporation (NAOC) Responsibilities:
Supervises, coordinates and participates in the activities of personnel in the routine electrical maintenance, overhaul, shutdown and breakdown repair of 33/11kv substation and plant equipment’s
Reviewing and fully understanding the intent, scope and quality requirements of work for the construction and commissioning works under area of responsibility
Tracks Key Performance Indicators (KPIs) and ensures KPI targets and results are communicated to the Maintenance Department staff effectively
Knowledge of EX-maintenance and the application of ATEX standard 1999/92/EG and ATEX product standard 94/9/EG especially the application of ATEX equipment groups and temperature classes.
Pre-Comissioning,commissioning and maintenance of MV and LV switchgear,11/0.4kv substation
Testing and Maintenance of transformers,UPS panels,AC,DC Distribution panels,Lv switch gear & vfd panels,Mcc & Pcc panels, battery banks & cable tray installation and cable laying.
Knowledge of Reliability Centered Maintenance (RCM) and Risk based inspection (RBI).
Implementation of CMMS (Computerized maintenance management software)for entire plant equipment’s as per company standards
CURRICULUM VITAE
Schlumberger-Private
Preparation and submission of MOC (Management of change ) and TQ (Technical quarry)
Implementation of corrective/preventive/shut down maintenance activities to meet the project goal
Participation in HAZOP and electrical system studies before execution.
Installation, pre-commissioning and commissioning of HT and LT motors
Involve in whole activities in maintenance of 33/11kv substation and control room
Attending regular and weekly meetings to the client and sub-contractors for the planning and progress
Preparation and submission of MOC (Management of change ) and TQ (Technical quarry)
Testing and Maintenance activities for the generators of 2X20MW Gas Turbine Generators auxiliaries,PCC(Power control center),MCC (Motor control center)
Commissioning and Maintenance of 2*1000KVA, 11 KV /440V Transformers, organizing & supervising the works of erection of Electrical installation.
Preparation of project construction schedule,carrying out inspection of items,works as per client specification & preparation of reports
Preparation of one line diagram based on loads for 11kv,0.4kv switchgear RK ELECTRIC AUTOMATION LTD, HYDERABAD, INDIA.
SENIOR EXECUTIVE ENGINEER (ELECTRICAL) / Dec 2010 TO July 2013 RK Electric Automation limited is an independent, privately owned EPC Contractiing Company that provides client with tailor made turnkey electrical & civil infrastructure solutions. Project- : Client: J3 PROJECT in Sulphur Recovery unit, DTA-PCG plant, at RIL, Jamnagar refinery, Gujarat ROLE & RESPONSIBILITIES: Installation, commissioning and maintenance of HV and LV switch gear, 11/0.4kv substation
Working experience in MV and LV Switch gear, protection of switch gear & maintenance of electrical equipment’s
Installation of HV/LV Cables, cable testing such as continuity test and Insulation resistance test, HI pot test etc.
Working Experience in Installation testing and Maintenance of LT panels, Motor control centers(Mcc’s) Power motor control centers
(PMCC’S) Power control centers(PCC’S) As per the Approved Drawings
Conducting training programs for the trainee employees and external clients Involve with FAT(Factory acceptance test),CAT
(Customer acceptance test),SAT(Site acceptance test
Working Experience in Installation and testing of LT Bus ducts (Non-segregated Bus ducts) Site inspection/walkdown,project work and material manpower planning
Implementation of CMMS for entire plant equipment’s as per company standards
Preparation and submission of MOC (Management of change ) and TQ (Technical quarry)
Cable laying of LT and HT grades for various transformers, motors and switch gear panels in various ratings
Testing and maintenance of UPS and DC supply systems, batteries and battery management systems(BMS) and all control and auxiliary panels
HVAC mcc panels, AHU & ACU installations and assistance given to HVAC vendor at the time of commissioning
Working Experience in above ground Earthing,Below ground Earthing,Equipment earthling like motors,LT Panels, Transformers & all Electrical Equipment’s
maintenance of LV and MV Motors
Working Experience in testing and maintenance of general Earth pits, Test pits, Electronic Earth pits & total plant Earth grid formation
Having the work experience in maintain plant lighting works, providing Lighting for building, internal building wiring, Emergency lighting & street lighting for overall plant
Co-ordination with other desciplies & Engineering department
Preparation of one line diagram based on loads for 11kv,0.4kv switch gear CURRICULUM VITAE
Schlumberger-Private
PMF INDIA LIMITED, HYDERABAD, INDIA.
SITE ENGINEER (ELECTRICAL) / Jan2009 To Oct 2010/Puzzolana machinery & fabricators is a India’s leading EPC Contracting company that provides client with tailor made turnkey electrical & civil infrastructure solutions. Job responsibilities: 1) LV & Mv Control panels installation, Equipment installation & commissioning of heavy machinery crusher plant at patel engineering (Rampur) in Himachal Pradesh
Responsibilities
Preparation of project construction schedule,carrying out inspection of items,works as per client specification & preparation of reports
Overall supervision and maintenance of all project activities.
Review of vendor documents and drawings including quality assurance plans, studying, reviewing the contract documents.
Preparation of construction programme & attend the periodical meetings with clients, reporting project progress and milestones.
Liase with sub-contractors and suppliers, liase with clients for project documentations.Status reporting progress and risks to project manager.
E) ENERGY CONTROL SYSTEMS / ELECTRICAL INCHARGE / Oct 2004 to Dec 2008 Energy control systems is an independent, privately power/electrical company that provides client with tailor made turnkey electrical solutions.
Projects: Electrical balance of plant (EBOP) works at Bageeradha chemicals (Ongole) Andhra Pradesh,
LV & Hv C Equipment installation & commissioning at priya dharshini hydro power project(Jurala)in Andhra Pradesh
LV Equipment installation & commissioning of the water purification plant at pulivendula,Andhrapradesh,
LV & Mv Equipment installation & commissioning of Amco cattle feeds unit at sultan basethi, Kerala.
Electrical balance of plant (EBOP) works at Matrix drugs pharma limited (Hyderabad) Andhra Pradesh
LV & Hv C Equipment installation & commissioning at Rampur hydro power project (Rampur) in Himachal Pradesh.
Installation,Testing,commissioning & maintenance of DOL,RDOL,Star/delta with VFD and soft starters
Installation, Testing, commissioning & maintenance of mcc, pcc, pmcc, mldb, eldb, Relay panels etc. SKILLS
H2S, Confined space Training
Performing Authority & Isolation Authority for (PTW) Self-contained Breathing Apparatus Training (SCBA) Trained in H2S safety. (CPCL)
Trained in Gas testing, PTW, CS Entry, Fire Fighting & Elementary First Aid. Certifications
1) Certified for 11KV High voltage substation testing, maintenance and operations The Faraday center ltd (UK) certificate no: 31767
2) 3 Months - Training Course – Diploma in Industrial Automation at Chennai From RemoTech Automation Industries.
2) 1 Month - Advanced Training Course in PLC / SCADA / Drives / HMI From AXCEL ERP SOFT TECH PVT LTD – .Hyderabad
3) 1 Month - Auto CAD: from AXCEL ERP SOFT TECH PVT LTD – .Hyderabad Academic Projects
Diploma : Study, SLD, Function, Flow of - 132 kV / 66 kV / 11 kV substations. CURRICULUM VITAE
Schlumberger-Private
B Tech : Study,SLD Function, Flow of Thermal power Station Computer Skills
PC Hardware &
Networking
Fundamental Knowledge.
Operating Systems Windows 7 / XP
Software Packages MS OFFICE & Auto CAD
DECLARATION: I consider myself familiar with Electrical & Electronics Engineering Aspects. I am also confident of my ability to work in a team. I hereby declare that the information furnished above is true to the best of my knowledge. Devi Vara Prasad