Resume

Engineering Corporation Design Supervisor

Location:

Manila, Philippines

Salary:

Company rate

Posted:

July 21, 2021

Contact this candidate

Resume:

ALVIN B. MALONZO (Piping Eng’r.)

Current Address: Baliuag Bulacan Philippines.

Nationality : Filipino

Mobile Tel. No. : +639*********

Home Email Address : adntyr@r.postjobfree.com

SUMMARY OF QUALIFICATIONS:

•Seventeen (17) Years combine experience on various oil and gas,Power Plant, refinery and petrochemical projects,Water waste treatment both local and overseas as Field Engineer, Piping Engineer and Design.

•Checking Isometric Drawing, Special support and All Piping Deliverables.

•Site Experience Method of Statement,Answer technical Queries, FDC and assist Piping construction team regarding Erection,Site problems and Hydrotesting.

•Fully conversant with piping code and standards as per client specifications.

•Knowledgeable with engineering drawings, schematic diagrams, and isometrics.

•Estimation,MTO preparation and Develop Preliminary Piping Scope of work

•Familiar with piping material specifications in accordance with various material standards.

•Knowledge of pipe stress analysis & pipe support.

•Support the Procurement & Construction phase activities such as providing technical specifications, testing/certification requirements, performing technical bids evaluation, supporting the installation/testing/construction/commissioning activities for the projects.

•Participates in P&ID Review, 3D Model, Constructability reviews pertaining to proposed modifications, including identifying potential operational and safety related problems and proposing appropriate solutions.

•Experienced with projects wherein effective communication with other disciplines, with different kinds of personalities and races is a daily requirement.

•Has self-time management skills and is well-organized to complete all targets as per planned schedule.

•Can deal with workloads and office pressures without affecting the quality of work.

•Experience of working as an assistant lead engineer /area lead engineer .

•Expert of working With 3D PDS Modeling Piping and Equipment, Microstation, Autocad,

NAVIS works and 3D SPR Model review .

1. February 29, 2020 - January 23, 2021

COMPANY : Lotte Engineering and Construction

POSITION : Piping Engineer

2. SEPTEMBER 19, 2018 - FEBRUARY 25, 2020

COMPANY : GSCME, Abu Dhabi UAE

POSITION : Piping Engineer

3. SEPTEMBER 13, 2017 - SEPTEMBER 12, 2018

COMPANY : JFE Engineering Corporation, Manila Branch

POSITION : Mechanical Piping Engineer

4. SEPTEMBER 21, 2015 - APRIL 15,2017

COMPANY : JGCS CONSORTIUM FE Department, Vietnam

POSITION : Field Piping Engineer

5. JUNE 27, 2011 - JUNE 26, 2015

COMPANY : SK ENGINEERING and CONSTRUCTION Piping Department, Seoul, Korea

POSITION : Piping Engineer

6. JANUARY 22, 2004 - JUNE 22, 2011

COMPANY : CHIYODA PHILIPPINES COPORATION Plant Engineering Department, Mandaluyong City, Philippines

POSITION : Piping Design Engineer/Area leader

SPECIAL SKILLS:

1.Piping, FEED, Refinery, P&ID, EPC, LNG, Oil and GAS,Water waste treatment.

2.Line Checker, Field Piping Engineer,Test package Engineer.

3.ASME, API, MSS and Others Reference Codes.

4.3D PDS Modeling (Piping,Equipment,Structural and G.A Extraction)

5.Basic PDMS,SP3D

6.Microstation 2D&3D

7.Smart Plant Review (SPR) and Navis work

8.Autocad

9.MS Office

10.Knowledge in Stress Caculation Result.

11.Knowledge in Material Specification.

12.Possess strong analytical thinking and and Problem solving skills.

WORK EXPERIENCE:

1. February 29 2020 - January 23, 2021

COMPANY : Lotte Engineering and Construction

Mechanical Department, Pekanbaru Indonesia

POSITION : Piping Engineer

PROJECTS INVOLVED :

Riau GFPP 275 MGW IPP Project(Power Plant)

DUTIES / RESPONSIBILITIES :

Manage and handle All Piping Deliverables for Water Treatment, BOP and HHP steam generation in Utility Boilers and Piping connecting to Gas Turbine Generators (GTG).

Study ITB; Project and design basis such as scope of work; Overall project schedule; Basic design data; Client standard drawings; Existing Drawing; and Plot plan.

Review and finalize Isometric drawing as IFC(Issue for construction) Site office.

Communicate and interface with other project design and engineering disciplines.

Assist Subcontractor Erection of Piping Above ground and HDPE installation.

Answer Technical Queries and Field Design change.

Review piping stress Calculation.

Review and finalize Piping Support.

Review Piping Arrangement Drawing.

Checking Piping Materials.

Prepare Method of Statement.

Prepare Test Package limit Diagram.

Monitor and Check Subcontractor Test Package progress

Punch Clearing Prior to Mechanical Completion.

2. SEPTEMBER 18, 2018 - February 25, 2020

COMPANY : GSCME

SMP Department, Abu Dhabi UAE (Home Base)

POSITION : Piping Engineer

PROJECTS INVOLVED :

Bahrain LNG Import Terminal Project (Offshore Project) Site Assignment

Gas & Aromatic Project (GAP) Proposal

PRC-Turn Around Project Proposal

Jafurah Gas Plant (JFGP) Proposal

DUTIES / RESPONSIBILITIES :

Creating Manpower Loading, Equipment loading and Tools and consumables for Piping.

Revision of drawings base on actual site condition.

Review and finalize Isometric drawing as IFC(Issue for construction) at Consortium office.

Site survey for possible Piping route and Installation.

Weld mapping Drawing.

Prepare Method of Statement.

Test Package Generation and Identifying Test Limits

Technical Assistance for Construction Team on Jetty Top, Trestle and Regas Structure, Tie-In, Rectification of Piping Misalignment and Support Details Identification.

As-Built Isometric Drawings (Construction and Engineering) thru Auto Spool and Autocad.

Punch list Clearing

Line Checking and Identifying Weld Balance per Test Package

Manual revision of Weld type on GTP-JC (Great Tools for Piping-Joint Control)

Provide technical Specification of Items for supports and Piping that need to be purchased

Prepare Piping work activity for daily report

Monitor and check daily Hydro test progress.

Punch Clearing Prior to Mechanical Completion.

3. SEPTEMBER 13, 2017 - SEPTEMBER 12, 2018

COMPANY : JFE Engineering Corporation

Mechanical Department, Manila Branch

POSITION : Mechanical Piping Engineer

PROJECTS INVOLVED :

SEPTEMBER 13, 2017 - SEPTEMBER 12, 2018

LA MESA WTP 1 (Water Treatment Plant)

QUEZON CITY, PHILIPPINES

DUTIES / RESPONSIBILITIES :

Manage and handle Piping Field Engineering such as revision of drawings base on actual site condition.

Create piping system's blueprints based on layout plan.

Modify piping system by coordination with civil/electrical engineer.

Check 3D model by using Navisworks.

Design piping support system with fabrication drawing.

Sourcing materials from piping drawings as bill of quantity.

Enhance knowledge of International Standards to piping design.

Supervise piping installation works by interpretating system design.

Respond to comments from client regarding piping system.

Communicate with associate engineers for coordination.

Propose cost-effective solution of piping system.

4. SEPTEMBER 21, 2015 - APRIL 15,2017

COMPANY : JGCS Consortium FE Department, Vietnam

POSITION : FIELD Piping Engineer

PROJECTS INVOLVED :

SEPTEMBER 21, 2015 - APRIL 15,2017

NSRP COMPLEX PROJECT

NGHI SON,VIETNAM

DUTIES / RESPONSIBILITIES :

Provide technical support as required during the construction phase of the project.

Be available to visit construction site when required. Ensure that work meets all necessary standards and codes.

Prepare Field Design Change based on site querries line condition.

Pipe routing of additional lines and Temporary lines.

Design of New additional Special support Drawing base on Stress Calculation.

Check and Review Special support drawings .

Site Verification, Review and approve as built drawing.

Checking Leak Test Diagram P&ID for Test limit.

As built Isometric drwing and Other deliverables.

Piping for Steam Tracing .

3D PDS Modeling

Test Package Review, Line checking and Hydrotest.

Clearing of comments or punch items and supports for Mechanical Completion.

5. JUNE 27, 2011 - JUNE 26, 2015

COMPANY : SK ENGINEERING and CONSTRUCTION Piping Department, Seoul, Korea

POSITION : Piping Engineer

PROJECTS INVOLVED :

Feb. 4,2013 – June 26,2015

NSRP COMPLEX PROJECT

NGHI SON,VIETNAM

Mar. 16,2012 – February 4,2013

FCC REVAMP PROJECT

ULSAN,SOUTH KOREA

Jun. 27,2011 – Mar. 15,2012

RUWAIS REFINERY EXPANSION (RRE Project)

ABU DHABI

Piping Engineer/Piping Checker

DUTIES / RESPONSIBILITIES

Responsible for develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors. Design equipment location, nozzle orientation and equipment platform.

Study ITB; Project and design basis such as scope of work; Overall project schedule; Basic design data; Client standard drawings; Existing Drawing; and Plot plan.

Design standard and special supports.

Review piping stress Calculation.

Check isometrics base on P&ID, equipment vendor data, 3D Model and design specifications.

Prepare MTO and bill of materials.

Attend/ participate in meetings and model reviews.

Communicate and interface with other project design and engineering disciplines.

Squad check of vendors drawings & prepares engineering deliverables.

To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.

6. Jan. 22, 2004 - JUNE 22, 2011

COMPANY : CHIYODA PHILIPPINES COPORATION Plant Engineering Department, Mandaluyong City, Philippines

POSITION : Piping Design Engineer/Area leader

PROJECTS INVOLVED :

LOCAL ASSIGNMENT :

Jun 3,2010 – Jun.22’2011

TAGANITO HPAL PROJECT (TNH)

Surigao Del Norte, Philippines

Jan.3 2010 – June 2,2010

HSF PROJECT - Nippon Petroleum Refining Co.Ltd

(Mizushima)Japan

Piping Design Engineer / Area Leader

DUTIES / RESPONSIBILITIES

•Implementation of detail design execution.

•Conduct planning, scheduling and monitoring of 3D activities and IFC issue.

•Prepare and report Weekly Status, Manhour and work volume.

•Establish and update Document Control List.

•Final check & review and approval of deliverables (Isometric drawing, Special Support, GA Drawing & ETC)

•Directly manage the design and PDS input & IFC issue control.

•Control of quality and man-hour.

•Verification of MTO data for accuracy.

•Monitors and controls any HOLD items of isometric drawings.

•Attend model review and TV conference meeting.

•3D PDS Modeling mentor for new Piping designer.

QATAR SITE OVERSEAS ASSIGNMENT :

Sept. 30, 2007 – Dec. 12, 2009

CTJV- Chiyoda Technip Joint Venture

SITE ASSIGNMENT-QATAR

Ras Laffan Onshore Expansion Project RGX 6&7

Piping Engineer /Field Piping Engineer.

DUTIES / RESPONSIBILITIES :

Check and Review IFC isometric drawings

Prepare Field Design Change based on site querries line condition.

Check and Review all latest attachment indicate in every Test Package.

Prepare Piping Test Package & ensure that latest P&ID, Isometric Drawings and other documentation required are incorporated in the Test Package.

Troubleshoots and assist Piping construction team regarding Site problems (Installation, obstruction to access and maintenance way, Interference to structure and electrical and instrument cable trays).

Inspect/Line check piping systems using Test Package and prepare Punch List identifying all incomplete items and issue to sub contractor side for action.

Check and review all the attachment indicated in every test Package (latest IFC Iso drawings, P&IDs and UHD).

Provide As-built drawing and Prepare Field Design Change based on site queries and line condition.

Expedite/Supervise punch clearing activities regarding priority systems and items to be cleared prior to testing and re-instatement.

Conduct joint line check/walk through with client as per system priority for their final acceptance.

Expedite/Supervise Client punch clearing activities.

Coordinate and Explain to Subcontractor’s Engineers and Foreman the priority systems and the remaining punch list to be cleared to catch up turn over schedule.

Clearing of comments or punch items and supports for Mechanical Completion.

LOCAL ASSIGNMENT :

Aug.1, 2006 – Sept. 20,2007

Ras Laffan Onshore Expansion Project RGX 6&7

Ras Laffan, Qatar

Piping 3D PDS Modeling / Checker

•Prepare isometric sketches traced from the Piping layout design drawing prepared by CYO.

•Execute pipe routing design for small bore (1.5" and below), nozzle and stage information, pipe support lugs on equipment, steam tracing design and other miscellaneous required for piping design development for CPh scope.

•Check, review and comment on 3D design and on drawings in accordance with project specification.

•Coordinate with other members of the group and work as one member of the team.

•Preparation and check of Isometric drawing IFC issue.

•Preparation of request package for Flex analysis.

•Preparation and checking of all SPS and GA drawing IFC issue.

•Prepare and update Loading Data and Information drawings.

•Prepares MTO deliverables to CYO.

•Check/Review vendor data.

•Prepare and update equipment control list.

•Performed piping layout, equipment modeling, platforms and miscellaneous structure into the 3D modelling using SmartPlant 3D (PDS).

•Performed 3D PDS Modeling Revision of Isometric drawing and Equipment.

•Performed 3D PDS modeling of Special Support.

•Creates isometric detail information and special pipe support drawings using Microstation.

•IGS Isometric Extraction and Solved Isometric error and bad files.

JAPAN ASSIGNMENT :

Apr.18, 2005 – July 25, 2006

CHIYODA –JAPAN

Ras Laffan Onshore Expansion Project RGX 6&7

Piping Design Engineer / 3D PDS Modeling.

Performed piping layout, equipment modeling, platforms and miscellaneous structure into the 3D modelling using SmartPlant 3D (PDS).

Performed 3D PDS modeling of Special Support.

Creates isometric detail information and special pipe support drawings using Microstation.

IGS Isometric Extraction and Solved Isometric error and bad files.

Checks extracted piping isometric based from the check list provided by the project utilizing the latest P&ID, Chiyoda Standards, piping flexibility results and other relevant engineering information with the aid of Smart Plant Reviewer (SPR) and Plant Design System (PDS), during Detail Engineering phase.

Perform Material Take-off (MTO) of Valves/Specialty Items based from P&ID.

Prepare 2D CAD drawings of GA drawings.

LOCAL ASSIGNMENT :

Jun. 1, 2004 – Apr.10, 2005

SEG Project – Sakhalin II, Phase 2 LNG Plant

Sakhalin Island, Russian Federation

Jan.22, 2004 – May 31, 2004

OLG Project – Oman Liquefied Natural Gas Plant, Train 3

Qalhat, Oman

Junior Piping Design Engineer / 3D PDS modeling

Performed piping layout, equipment modeling, platforms and miscellaneous structure into the 3D modelling using SmartPlant 3D (PDS).

Performed 3D PDS Modeling Revision of Isometric drawing and Equipment.

Performed 3D PDS modeling of Special Support.

Creates isometric detail information and special pipe support drawings using Microstation.

IGS Isometric Extraction and Solved Isometric error and bad files.

Prepare 2D CAD drawings of GA drawings

SEMINARS AND TRAINING ATTENDED:

MICROSTATION