ZAIDI

NDT and QAQC Welding Inspector

PERSONAL DETAILS

Mobile : +62-823-****-****.

E-mail address : adnqfx@r.postjobfree.com

Date of birth : June 5th, 1971.

Place of Birth : Batam, Indonesia.

Sex : Male.

Marital Status : Married.

Nationality : Indonesian

Residence : Tanjung Uma RT04 RW01 No.72 Batam Island – Indonesia

CERTIFIED:

- Senior Welding Inspector CSWIP 3.2.1

- EN ISO 9712:2012 UT Level 3

- PCN UT Level 2

- PCN RI Level 2

- ASNT Phased Array UT Level 2

- ASNT MPI Level 2

- ASNT LPT Level 2

- EN ISO 9712:2012 MPT Level 2 (Certificate Issuing Process)

- EN ISO 9712:2012 MPT Level 2 (Certificate Issuing Process)

- Panting/Coating Inspector (In-house/Private Training conducted by Mujianto Ali NACE CIP Level 3 Certified Coating Inspector #6858)

- BGAS Painting Inspector Gr2 (Certificate Issuing process)

SAUDI ARAMCO APPROVED QC INSPECTOR:

ID.70023164: QM03, QM04, QM06, QM07, QM08 and QM12.

I am keenly, initiative, hardworking, good time management and able to work with minimum supervision. I can gain not only for self-development, but also to be able to contribute for company success. More than 15 years experiences in Onshore and Offshore Fabrication, Construction and Installation for Welding, Piping/Mechanical, Structural, Pipe mill and Pipe Inspection, NDE, Pipeline & Sub-sea, Module FPSO, Offshore Structural Platform Facility, Topside and Jacket, LNG train, CRA (Cladding) Lined Pipe, Bending Pipe, Liner Pipe, Flanges and Pipe Fittings, Subsea equipment, Hydro/ Pneumatic testing, Documentation for record traceability in Oil and Gas Industries accordance to ISO Quality System, also familiar with the international Code and Standard requirement and application.

Involve on various Onshore and Offshore projects, with variety of responsibilities and capacities as QC Welding Inspector, NDT Inspector, UT Cross Checker, Phased Array UT Inspector, Third Party Inspector and Client’s QC Representative.

LANGUAGES

English: Good

Bahasa: Good

QUALIFICATION

Senior Welding Inspector CSWIP 3.2.1.

Certificate No.395710, Customer/Candidate No. 579553 Conducted by TWI Certification Ltd

EN ISO9712:2012 UT Level 3 Certificate No.141**-****-** Conducted by RTC Testing and Diagnostics.

PCN RI Level 2 Certificate No. F019S62420053 PCN No.306384 Conducted by BINDT.

PCN UT Level 2 Certificate No. F019S62420053 PCN No. 306384 Conducted by BINDT.

Categories: 3.1, 3.2, 3.7, 3.8 & 3.9 Conducted by BINDT.

ASNT MPI Level 2 Certificate No. ETG/II/MT/20142 Certified by ASNT NDT Level III WILYAN SAFITRA ID No.208733 Conducted by PT. ERR TEHNIK GAWINDO.

ASNT LPT Level 2 Certificate No. ETG/II/PT/30142 Certified by ASNT NDT Level III WILYAN SAFITRA ID No.208733 Conducted by PT. ERR TEHNIK GAWINDO.

ASNT Phased Array UT Level 2 Certificate No. ETG/II/UT/50032 Certified by ASNT NDT Level III WILYAN SAFITRA ID No.208733 Conducted by PT. ERR TEHNIK GAWINDO.

EN ISO9712:2012 MPT Level 2 (Certificate Issuing process)

EN ISO9712:2012 LPT Level 2 (Certificate Issuing process)

Panting/Coating Inspector (Inhouse/Private Training) conducted by Mujianto Ali NACE CIP Level 3 Certified Coating Inspector #6858).

BGAS Painting Inspector Gr2 (Certificate Issuing process)

SKILLS AND ABILITY

QC Welding and NDT Inspector.

UT Operator/Cross Checker (All configuration including TKY Joints and Node Welds and TMCP Materials).

Radiographic Interpreter.

MT & PT Technician.

Phased Array UT Inspector.

Painting Inspector.

PROFESIONAL EXPERIENCES

1.April 2021 up to Present

Castlab Laboratories

Position : Senior NDT Technician

Location : Wasco Engineering - Indonesia

Job Description :

Understanding each project specifications and the respective QC and NDT procedure.

Verifying regular NDT equipments performance check to ensure they are in calibrated condition and maintaining records of those calibrations.

Ensuring all of non-destructive testing activities are technically complied with project specification, approved procedure and established quality standard.

Assisting Contractor QC Inspectors and NDT Coordinator in resolving any disputes relating to non-destructive testing which may arise between Client and The Contractor.

Perform UT Cross Check/Verify for Repair/Rejected welds.

Daily monitoring NDT results and review of the result along with contractor and 3rd party inspectors and customer representative.

Perform UT Cross Check/Verify for Repair/Rejected welds.

Verify NDT Technicians performance by cross checking their NDT results.

Liaise with contractor QC Inspector and NDT coordinator in resolving any NDT issues.

Project:

Neart na Gaoithe (NnG) offshore wind farm – SAIPEM

2.December 2019 up to March 2021.

Bureau Veritas

c/o SAUDI ARAMCO

Position : Monitoring Inspector.

Location : PT. Cladtek BI Metal Manufacturig, Batam - Indonesia.

Job Description :

Daily monitor to ensure all manufacturing process are complied with approved Manufacturing Procedure Specification and Project Specification.

Witness and Review PQR, WPS, WQT or Welding Operator Qualification, MPQT, BQT, MRB.

Perform daily basis inspection base on notification as per ITP.

Ensuring Non-destructive testing activities are technically complied with approved procedure and Project Specification.

Witness all Witness Point Process as per ITP such as Receiving Material and Weld consumable, Fit up, Weld overlay, Hot Induction Bending, Pre-Bend Heat Treatment, Post Bend Heat Treatment PMI, Hydrotest, Hardness Test, DT/Mechanical Test, NDT (MPI, LPT, Conventional UT, Phased Array UT, Radiographic Interpretation, Final Dimensional Check, Dimensional Check, Final Visual, Cleaning/Pickling, Packing prior to shipment, etc).

Review/Interpret Radiograph.

Project:

CRA Pipe Fittings and Flanges – SAUDI ARAMCO.

CRA Line Pipe and Spool Pipes – SAUDI ARAMCO.

CRA and CS Hot Induction Bends – SAUDI ARAMCO.

Fabricated Spools – SAUDI ARAMCO.

3.November, 2018 up to December 2019.

Bureau Veritas

c/o L&T Hydrocarbon Engineering Limited

Position : QC Welding and NDT Inspector.

Location : PT. Cladtek BI Metal Manufacturig, Batam - Indonesia.

Job Description :

Daily monitor to ensure all manufacturing process are complied with approved Manufacturing Procedure Specification and Project Specification.

Witness and Review PQR, WPS, WQT or Welding Operator Qualification, MPQT, BQT, MRB.

Perform daily basis inspection base on notification as per ITP.

Ensuring Non-destructive testing activities are technically complied with approved procedure and Project Specification.

Witness all Witness Point Process as per ITP such as Receiving Material and Weld consumable, Fit up, Weld overlay, Hot Induction Bending, Pre-Bend Heat Treatment, Post Bend Heat Treatment PMI, Hydrotest, Hardness Test, DT/Mechanical Test, NDT (MPI, LPT, Conventional UT, Phased Array UT, Radiographic Interpretation, Final Dimensional Check, Dimensional Check, Final Visual, Cleaning/Pickling, Packing prior to shipment, etc).

Review/Interpret Radiograph.

Project:

CRA Pipe Fittings and Flanges – SAUDI ARAMCO.

CRA Line Pipe and Spool Pipe – SAUDI ARAMCO.

CRA and CS Hot Induction Bend – SAUDI ARAMCO.

Fabricated Spools – SAUDI ARAMCO.

4.April 9th, 2018 up to August 9th, 2018.

PT.Cladtek BI Metal Manufacturing.

Position : NDT Supervisor.

Location : Batam - Indonesia.

Job Description :

Understanding each project specifications and the respective QC and NDT procedure.

Verifying NDT equipments are in calibrated condition and maintaining records of those calibrations.

Ensuring non-destructive testing activities are technically comply to approved procedure and established quality standard.

Assisting NDT Co-coordinators in resolving any disputes relating to non-destructive testing which may arise between Cladtek and The Customer.

Perform UT Cross Check/Verify for Repair/Rejected welds (rejected by subcontractor UT Technicians).

Interpret Phased Array UT.

Review/Interpret Radiograph.

Project:

CRA Weld Pipe Fittings and Flanges.

CRA Line Pipe.

CRA and CS Hot Induction Bend.

Spool Fabrication.

5.March 2015 up to March 2017.

SAIPEM INDONESIA KARIMUN BRANCH

Position : UT/NDT Technician.

Location : Karimun - Indonesia.

Job Description :

Verifying NDT equipments are in calibrated condition and maintaining records of those calibrations.

On a daily basis, physically performing non-destructive testing of weld, plate and materials, to determine they meet established quality standards.

Ensuring non-destructive testing records are maintained for each project.

Assisting Yard NDT Co-coordinators in resolving any disputes relating to non-destructive testing which may arise between SIKB and The Customer.

Promptly and timely preparation and reporting of the NDT results to all concerned or interested parties or personnel.

Daily monitoring NDT results and review of the result along with customers and 3rd party inspectors and customer representative.

Perform UT Cross Check/Verify for Repair/Rejected welds (rejected by subcontractor UT Technicians)

Verify Subcontractor UT Technicians performance by cross checking their UT result (one joint of each technician for weekly periodic).

Project:

KAOMBO (Topside and Jacket) – TOTAL E & P ANGOLA BLOCK 32.

JANKRIK COMPLEX PROJECT FPU (Topside) – ENI

6.August 2014 up to December 2014.

PETRONAS

Position : Welding and NDT Inspector.

Location : PT. McDermott Indonesia.

Job Description :

Understanding each project specifications and the respective NDT procedure.

Verifying NDT equipments are in calibrated condition and maintaining records of those calibrations.

On a daily basis, physically performing non-destructive testing of weld, plate and materials, to determine they meet established quality standards.

Ensuring non-destructive testing records are maintained for each project.

Assisting Yard NDT Co-coordinators in resolving any disputes relating to non-destructive testing which may arise between SIKB and The Customer.

Promptly and timely preparation and reporting of the NDT results to all concerned or interested parties or personnel.

Daily monitoring NDT results and review of the result along with customers and 3rd party inspectors and customer representative.

Perform UT Cross Check.

Perform UT Cross Check/Verify for Repair/Rejected welds (rejected by subcontractor UT Technicians).

Review/Interpret Radiograph.

Verify Subcontractor UT Technicians performance by cross checking their UT result (one joint of each technician for weekly periodic).

Project:

JACKET - BUKIT TUA PROJECT.

7.March 2014 up to July 2014.

Single Bouy Mouring ( SBM )

Position : UT Cross Checker/NDT Inspector.

Location : Keppel Shipyard - Singapore.

Job Description :

Understanding each project specifications and the respective UT procedure.

Verifying UT equipment are in calibrated condition and maintaining records of those calibrations.

On a daily basis, physically performing UT of weld, plate and materials, to determine they meet established quality standards.

Ensuring non-destructive testing records are maintained for each project.

Assisting Yard NDT Co-coordinators in resolving any disputes relating to UT.

Promptly and timely preparation and reporting of the UT results to all concerned or interested parties or personnel.

Daily monitoring UT results and review of the result along with customers and 3rd party inspectors and customer representative.

Perform UT Cross Check.

Verify Subcontractor UT Technicians performance by cross checking their UT result (one joint of each technician for weekly periodic).

Project:

ICHTHYS TURRET PROJECT – INPEX.

8.September 2012 up to March 2014.

SAIPEM INDONESIA KARIMUN BRANCH

Position : UT/NDT Inspector.

Location : Karimun - Indonesia.

Job Description :

On a daily basis, physically performing non-destructive testing of weld, plate and materials, to determine they meet established quality standards.

Ensuring non-destructive testing records are maintained for each project.

Assisting Yard NDT Co-coordinators in resolving any disputes relating to non-destructive testing which may arise between SIKB and The Customer.

Promptly and timely preparation and reporting of the NDT results to all concerned or interested parties or personnel.

Daily monitoring NDT results and review of the result along with customers and 3rd party inspectors and customer representative.

Perform UT Cross Check/Verify for Repair/Rejected welds (rejected by subcontractor UT Technicians).

Review/Interpret Radiograph.

Verify Subcontractor UT Technicians performance by cross checking their UT result (one joint of each technician for weekly periodic.

Project:

GORGON PROJECT (Topside and Jacket) - BARROW ISLAND PLANT – CHEVRON.

HASBAH & ARABIYAH OFFSHORE FACILTY (Topside) - SAUDI ARAMCO.

IRAQ CRUDE OIL EXPORT EXPANSION PROJECT (Topside) – FOSTER WHEELER.

TOPSIDE/MODULE - SAUDI ARAMCO

9.December 2011 up to August 2012.

ECOGLOBAL c/o SAIPEM LEIGHTON CONSORTIUM (SLC)

Position : NDT Inspector.

Location : Saipem Indonesia Karimun Branch.

Job Description :

Understanding each project specifications and the respective NDT procedure.

Verifying NDT equipments are in calibrated condition and maintaining records of those calibrations.

On a daily basis, physically performing non-destructive testing of weld, plate and materials, to determine they meet established quality standards.

Ensuring non-destructive testing records are maintained for each project.

Assisting Yard NDT Co-coordinators in resolving any disputes relating to non-destructive testing which may arise between SLC and Chevron(client).

Promptly and timely preparation and reporting of the NDT results to all concerned or interested parties or personnel.

Daily monitoring NDT results and review of the result along with customers and 3rd party inspectors and customer representative.

Perform UT Cross Check.

Review/Interpret Radiograph.

Verify Subcontractor UT Technicians performance by cross checking their UT result (one joint of each technician for weekly periodic).

Ensure the job areas and surroundings are safe and ensure all employees working with safety and aware about safety regulation.

Project:

GORGON PROJECT (Topside and Jacket) – BARROW ISLAND PLANT – CHEVRON.

10.May 2011 up to December 2011.

FMC Wellhead Equipment Sdn. Bhd.

Position : QC Welding and NDT Inspector.

Location : PT. PROFAB Batam – Indonesia.

Job Description :

Review I.T.P.

Review WPS.

Review Welder Qualifications Record.

Review Weld Map.

Review DC Report.

Review Material, Weld Consumable and Equipment Certificates.

Ensure all related fabrication activity in accordance with Project spesifications and or related code/standard.

Monitor welding activity (Before, During and After).

Release inspection with QC subcontractor.

Ensuring non-destructive testing records are maintained.

Daily monitoring NDT results and review of the result along with 3rd party inspectors.

Perform UT Cross Check.

Review/Interpret Radiograph.

Verify Subcontractor UT Technicians performance by cross checking their UT result one joint of each technician for weekly.

Project:

Subsea Structure (Control and XMas Tree Structure) Copy Bawal – Conoco Philips Indonesia.

11.Augustus 2010 to April 2011

PT. Radiant Utama Indonesia

Position : UT/NDT Inspector.

Location : SMOE Batam, Nippon Steel Batam and Saipem ENI.

Job Description :

Understanding each project specifications and the respective NDT procedure.

Verifying NDT equipment are in calibrated condition and maintaining records of those calibrations.

On a daily basis, physically performing UT Inspection of weld, Plate, Pipe and materials to determine they meet established quality standards.

Review/Interprete Radiograph.

Ensuring UT inspection records are maintained for each project.

Promptly and timely preparation and reporting of the UT results to all concerned or interested parties or personnel.

Ensure the job areas and surroundings are safe and ensure all employees working with safety and aware about safety regulation.

Project :

Topside Gajah Baru CPP and Pipe Line - Premier Oil Indonesia.

Pipeline Arthit Thailand – PTTEP Thailand.

Pipeline Surya B – Carigali Hess.

12.January 2010 up to Augustus 2010

TNDT PUBLIC CO. LTD. Thailand

Position : UT/NDT Inspector.

Location : Thailand Offshore.

Job Description :

Understanding each project specifications and the respective NDT procedure.

Verifying NDT equipment are in calibrated condition and maintaining records of those calibrations.

On a daily basis/requested, physically performing UT Inspection of weld, Plate/Pipe and materials to determine they meet established quality standards.

Ensuring UT inspection records are maintained for each project.

Promptly and timely preparation and reporting of the UT results to all concerned or interested parties or personnel.

Project:

PTTEP – Arthit Project Phase 1C (Topside and Jacket).

13.May 2006 up to January 2010

PT. McDermott Indonesia

Position : UT/NDT Inspector (UT Cross Checker).

Location : Batam Base.

Job Description :

Understanding each project specifications and the respective NDT procedure.

Verifying NDT equipments are in calibrated condition and maintaining records of those calibrations.

On a daily basis, physically performing non-destructive testing of weld, plate and materials, to determine they meet established quality standards.

Ensuring non-destructive testing records are maintained for each project.

Assisting Yard NDT Co-coordinators in resolving any disputes relating to non-destructive testing which may arise between PT.MI and The Customer.

Promptly and timely preparation and reporting of the NDT results to all concerned or interested parties or personnel.

Daily monitoring NDT results and review of the result along with customers and 3rd party inspectors and customer representative.

Perform Cross Check/Verify for Repair/Rejected welds(rejected by subcontractor UT Technicians)

Review/Interpret Radiograph.

Verify Subcontractor UT Technicians performance by cross checking their UT result one joint of each technician for weekly periodic.

Ensure the job areas and surroundings are safe and ensure all employees working with safety and aware about safety regulation.

Project:

PTMI Yard facility.

Subsea Plem Structure-SSB.

DSF for SU TU VANG Top side – CULONG.

North Belut CPP Topside - Conoco Phillips Indonesia.

SU TU DEN-Subsea Plem structure.

Pluto LNG - Installation Deck and Drilling Caisson-WOODSIDE.

North Rankin B (Jacket)-WOODSIDE.

Platong Gas II (Jacket, LQ and Topside) – CHEVRON.

KIPPER TUNA & TURRUM Gas Phase 2 - ESSO Australia Ltd.

14.September 1999 up to May 2006

PT. McDermott Indonesia

Position : Welding/Material QC Inspector.

Location : Batam – Indonesia.

Job Description :

To performs piping and structural material traceability activities.

To conduct final visual inspection by inviting client to witness material that should be released out after fabricated.

Review NDT drawing / Weld map.

Review and inspection as per inspection test plan to relevant Project.

Review WPS relevant Project.

Inspection before, during, after welding.

Release inspection with client representative.

NDT request / documentation preparation.

Project:

North Pailin Gas Development Project Phase II (Topside)- UNOCAL Thailand.

Bayu Undan (Jacket) Gas Recycle Project-PHILIPS.

Wellhead A & B Jacket and Topside -CONOCO.

FPSO Module SU1 to S7, P1 to P5 & P7 and Pipe Rack-CONOCO.

Dominion Devil Tower.

Rang Dong JVPC.

15.March 1997 up to September 1999

PT. McDermott Indonesia

Position : NDT Drawing Draftsman.

Location : Batam – Indonesia.

Job Description :

Prepare NDT drawing and determine NDT requirement on each joint as per client specification.

Project:

Pogo (Intec) WP ”A” & “B” Topside and Jacket.

Sembawang & Primer Yetagun Project.

Total Bongkot Thailand - Topside

Total Myanmar Yadana Project – Topside.

16.June 1995 up to March 1996

PT. McDermott Indonesia

Position : NDT drawing draftsman.

Location : Batam – Indonesia.

Job Description :

Prepare NDT drawing and determine NDT requirement on each joint as per client specification.

Project:

SSB M3PQ-A Jacket.

EPM Lawit ”A” Project.

Foster Wheeler Modules Project.

Contact this candidate