CURRICULUM VITAE
MD AZEEM
E-Mail : adnpo2@r.postjobfree.com
Mobile: +91-967*******
To evolve as an efficient, dynamic and productive personality in the field of Engineering, so that my expertise, analytical and theoretical knowledge can be utilized and broadened.
Designing HAVC and Clean room equipment’s following ISO, ASHRAE/ISHRAC standards.
Heating/Cooling Load Calculation followings Carrier E-20, ASHRAE/ISHRAE hand books & software, building survey.
Selection of Indoor and Outdoor units according to calculated CFM and TR.
Selection of diffuser, grills and of GI sheets, calculation of no. of sheets required, selection of AHU after static pressure calculation.
Calculation of duct sizes, Design and Drafting of all types of air conditioning systems and preparation of duct layout with supply and return diffusers, Duct grills with flexible connections.
Detail Production drawings of the HVAC and clean room equipments.
Preparing Quotations, Basic of design and Bill of quantity.
Pipe sizing for Chiller with complete valve and fittings, pipe size calculation for chilled water circuit to AHU, cooling tower, calculation of pipe dia.by considering friction loss, pipe sizing for VRV/VRF.
Course Discipline Institution Board/University Year Of Passing
% of
marks
B-tech Mechanical
Engineering
CMR
Engineering
College
JNTU H 2016-
2019 62%
Diploma Mechanical
Siddhartha
Institute of
Technology&
Sciences
State Board of
Technical Education
and Training
2013-16
69%
SSC ST Peter’s Model
School
Board of Secondary
Education 2012-13 6.0(GP
A)
OBJECTIVE:
EDUCATIONAL DETAILS:
JOB PROFILE:
CURRICULUM VITAE
MD AZEEM
E-Mail : adnpo2@r.postjobfree.com
Mobile: +91-967*******
To evolve as an efficient, dynamic and productive personality in the field of Engineering, so that my expertise, analytical and theoretical knowledge can be utilized and broadened.
Designing HAVC and Clean room equipment’s following ISO, ASHRAE/ISHRAC standards.
Heating/Cooling Load Calculation followings Carrier E-20, ASHRAE/ISHRAE hand books & software, building survey.
Selection of Indoor and Outdoor units according to calculated CFM and TR.
Selection of diffuser, grills and of GI sheets, calculation of no. of sheets required, selection of AHU after static pressure calculation.
Calculation of duct sizes, Design and Drafting of all types of air conditioning systems and preparation of duct layout with supply and return diffusers, Duct grills with flexible connections.
Detail Production drawings of the HVAC and clean room equipments.
Preparing Quotations, Basic of design and Bill of quantity.
Pipe sizing for Chiller with complete valve and fittings, pipe size calculation for chilled water circuit to AHU, cooling tower, calculation of pipe dia.by considering friction loss, pipe sizing for VRV/VRF.
Course Discipline Institution Board/University Year Of Passing
% of
marks
B-tech Mechanical
Engineering
CMR
Engineering
College
JNTU H 2016-
2019 62%
Diploma Mechanical
Siddhartha
Institute of
Technology&
Sciences
State Board of
Technical Education
and Training
2013-16
69%
SSC ST Peter’s Model
School
Board of Secondary
Education 2012-13 6.0(GP
A)
OBJECTIVE:
EDUCATIONAL DETAILS:
JOB PROFILE:
CURRICULUM VITAE
MD AZEEM
E-Mail : adnpo2@r.postjobfree.com
Mobile: +91-967*******
To evolve as an efficient, dynamic and productive personality in the field of Engineering, so that my expertise, analytical and theoretical knowledge can be utilized and broadened.
Designing HAVC and Clean room equipment’s following ISO, ASHRAE/ISHRAC standards.
Heating/Cooling Load Calculation followings Carrier E-20, ASHRAE/ISHRAE hand books & software, building survey.
Selection of Indoor and Outdoor units according to calculated CFM and TR.
Selection of diffuser, grills and of GI sheets, calculation of no. of sheets required, selection of AHU after static pressure calculation.
Calculation of duct sizes, Design and Drafting of all types of air conditioning systems and preparation of duct layout with supply and return diffusers, Duct grills with flexible connections.
Detail Production drawings of the HVAC and clean room equipments.
Preparing Quotations, Basic of design and Bill of quantity.
Pipe sizing for Chiller with complete valve and fittings, pipe size calculation for chilled water circuit to AHU, cooling tower, calculation of pipe dia.by considering friction loss, pipe sizing for VRV/VRF.
Course Discipline Institution Board/University Year Of Passing
% of
marks
B-tech Mechanical
Engineering
CMR
Engineering
College
JNTU H 2016-
2019 62%
Diploma Mechanical
Siddhartha
Institute of
Technology&
Sciences
State Board of
Technical Education
and Training
2013-16
69%
SSC ST Peter’s Model
School
Board of Secondary
Education 2012-13 6.0(GP
A)
OBJECTIVE:
EDUCATIONAL DETAILS:
JOB PROFILE:
Selection of exhaust fans, Blowers and motors for HVAC and clean room equipment’s.
HVAC Design Engineer at ULTRAFIL AIR SYSTEMS (I) PVT LTD, Road No.5, IDA Nacharam, Hyderabad.
July/2019 – Present
Technical subjects: - AUTOCAD, CATIA V5, SOLID WORKS, CNC Programming and Operating, Nicotra software.
Good communication skills summed up to splendid knowledge in the area of HVAC and Clean rooms.
Self-motivated and Eagerness to learn new concepts quickly for the organization.
Good understanding of the cost and scheduling constraints present in the fast track projects.
Determined and ability to face new challenges and new opportunities for good outcome of the organization.
Diploma
Title : Diploma industrial training (2016)
Place : National Small IndustriesCorporation Limited(NSIC) B.tech
Title :Design and Drafting of a HVAC system for a commercial building with a chilled water fan coil unit (2019)
Place : Dhanush Engg Services Private Limited.
Diploma
Title : Different manufacturing processes (2015)
Place : Smart Bridge Engineering.
B.tech
Title : Fabricationand Controlling of robotic arm using hydraulics (2018)
Place : CMR Engineering College.
MAJOR PROJECTS:
TECHNICAL SKILLS:
SYNOPSIS:
MINI PROJECTS:
WORK HISTORY:
Certification from Cambridge English Languageassessment.
Participatedinworkshopon “Lean Six Sigma”.
Participatedin AVIVA YOUNG SCHOLAR NATGEO JUNIOR HUNT.
CNC Milling and Turning Programming and operatingfor 6 months.
Internship at Tata Motors Service Center.
Workshop on Lean Six SigmaforEngineersand its application in automobile manufacturing.
Name :- MD AZEEM
Name of Father :- MD RAFIQ
Name of Mother :- SHAMEEM BEGUM
Date of Birth :- 01 MARCH 1997
Languages Known :- English, Urdu, Hindi & Telugu.
Hobbies :- Playing cricket, Listening music, Travelling. Nationality :- Indian
Permanent address :- 4-4-80, Navya residency, Verrareddy colony, Nacharam, Hyderabad, 500076.
I hereby declare that the information furnished above is true to the best of my Knowledge and belief.
Place: Date: Hyderabad
(MD AZEEM)
ACHIEVEMENTS:
INTERNSHIPS AND WORKSOP:
PERSONAL PROFILE:
DECLARATION: