Mechanical Assembler /Heavy Duty Mechanic
Resume:
Claremore, OK *****
**********@*****.***
EXPERIENCE
MACY’S FULLFILMENT CENTER 918-***-****
**** * **** ** * Owasso, OK 74055
BALER/BATTERY TECHNICIAN
10/2019-10/2020
Controlled and maintained baler for boxes and trash. My primary duties were to calibrate the machine, observe the meters on the machine during operation, tie bales and take the full bales out of the machine by forklift (MHE) and load into 53’ trailer. Remove and replace batteries on forklifts as needed.
FEMCO MACHINE
8600 W 81st St Odessa, TX 79764 412-***-****)
HYDRAULIC MECHANIC
04/2018 - Current Employer Inspect and diagnose defects in hydraulic and cable operated attachments, hydraulic systems and injection valves and systems for heavy duty oilfield equipment. Tear down and repair hydraulic motors, valve and cylinders and rebuild. Frequent use of hydraulic schematics. $27 hr. end $32 hr. Business closed doors 6/27/2019 Truckmovers Inc
9717 E 42nd St #200, Tulsa, OK 74146 918-***-**** TRUCK INSPECTOR
1/2018 - 3/2018 Inspection of trucks coming out of manufacturing plant. Inspecting for damages, faults and safety before storage, staging and release of trucks for delivery.Temp Job. Reference James Blevins 816-***-****
SUNDT CONSTRUCTION & GENERAL CONTRACTOR
2015 W River Rd Ste 101, Tucson, AZ. 85704 520-***-**** EQUIPMENT OPERATOR - MATERIAL LIFT OPERATOR
01/2016 – 08/2017 Pre-trip inspection of equipment prior and after daily use. My job was to move tools and equipment from one location to another and unload flatbeds on the APS construction project, with safety as the number one priority. Utilized spotters on the jobsite I assist skilled craft workers in performing their assigned duties. My responsibilities included coordinating and delegating other operators to job calls according to their skill levels. My priority was to ensure myself and other equipment operators maintain a good and clear communication with the other craft departments, always follow all safety rules and use their spotters. Though we had various craft teams onsite, I stressed that we all have the same project goal, to give the consumer the highest quality and efficient job we can provide as safely as we can. In observation of our operations, I frequently shared my input on how we could do our jobs more efficiently and some of those suggestions were implemented. Project ended. Started at $22 hr. ended at $24 hr.
Reference Kyle Brady - Supervisor 505-***-****
DAY AND ZIMMERMANN
1500 Spring Garden St. Philadelphia, PA 19130 717-***-**** GENERAL FOREMAN - EQUIPMENT OPERATOR 10/2013-12/2015 Gathered shift information from various departments and delegated duties to crew members each shift. I safely operated heavy equipment as required in building roads, coal pushing, loading ash haul trucks and running end dump to remove waste piles. I ensured my crew operated in a safe manner adhering to PNM and government protocols. I prepared inspection sheets, daily job reports, reviewed crew job performances and directed corrective actions when needed. I reported any equipment inadequacies or malfunctions for repair or LOTO. Enforced good housekeeping in work areas to ensure a safe work environment. Started at $22 hr., ended at
$25 hr. Company Contract Expired. Reference Leroy Blackie 505-***-**** FHI Inc.
2200 E. Williams Field Rd.#200 Gilbert, Arizona 85295 702-***-**** BENEFITED MECHANIC
01/2011 - 01/2013 Maintained and performed preventative maintenance and repairs on various types of fly ash hauling equipment including but not limited to: ash haulers, bulldozers, motor graders, water trucks, rubber tire dozers, front end loaders, light plants, water pumps. Rebuild SKILLS
Mature, responsible, experienced and
dedicated professional with a broad
range of career skills.
1. Experienced Mechanic, Shop
Foreman and Heavy Equipment
General Foreman
2. Over 18 years’ experience in the
maintenance and repair of coal
mining heavy equipment.
3. Completed a 6000-hour
apprenticeship in Diesel and
Automotive Mechanics.
4. Certified in HVAC/R, including EPA
Universal Technician.
5. Safety Conscious, 19 years of
safety awards at BHP and Safety
awards at NECA, Skanska and Sundt
6. Self-starter, excellent
organizational and communication
skills
7. Team leader with strong oral and
written communication skills.
8. Flexible employee, willing to work
any shifts and overtime.
9. Able to handle stressful personnel
situations with diplomacy.
LANGUAGES
English
Navajo
AWARDS
SAFETY - BHP
SAFETY - SKANSKA
SAFETY - SUNDT
SAFETY - NECA
ATTENDANCE - NECA
hydraulic cylinders, hydraulic components, troubleshooting electrical and hydraulic systems as well as diesel engines. On Layoff status due to APS power unit shutdown. Started at $23 hr. ended at $24 hr. New Opportunity as Equipment Operator. Reference Don Shorty 505-***-**** SKANSKA
22419 Road G, Cortez, CO 81321 970-***-**** FIELD MECHANIC - OPERATOR
03/2009 – 11/2010 Worked as a field mechanic on the Highway 491 road project at Little Water, New Mexico to Sheep-Spring New Mexico. Responsibilities included maintaining all highway construction equipment including small water pumps, light duty pickups, water trucks, sheep-foot rollers, 14M motor graders, tracked bulldozers, scrapers and excavators. I was solely responsible for the maintenance of over 100 pieces of heavy equipment. Maintained good teamwork attitude with the various work crews associated on this project, supervisors and fellow employees. Ordered parts via cell phone and laptop computer as needed. Required minimal supervision and performed daily tasks and duties accident free in all weather conditions. I received safety award. Project ended for winter. $19 hr. Contract ended.
F.C.I. FORT WORTH
3150 HORTON ROAD FORT WORTH, TX, 76119 817-***-**** POWERHOUSE TECHNICIAN
2000- 2009 I worked in the powerhouse of a large federal institution. Duties were centered in the operation and maintenance of the institutions boilers. Responsibilities included water testing for alkalinity and salinity levels, temperature and adding chemicals in accordance to test results. Duties also included maintenance and repair of boiler equipment and pumps. Received on the job training in the repair and rebuilding of pumps. PHOENIX UNICOR
37940 N 45th Ave, Ste 1650 Phoenix, ARIZONA 85086 800-***-**** CHEMICAL ROOM CLERK
1997-1999 I maintained the inventory of all chemicals used throughout an Electrical component manufacturing and assembly facility. Duties included ordering and distributing various chemicals, maintaining up to date information regarding handling, storage and disposal of all chemicals, with special emphasis on hazardous chemicals. I was responsible for distribution of MSDS information to all end users
NAVAJO ENGINEERING AND CONSTRUCTION CO. (NECA)
1 Uranium Blvd, Shiprock, NM 87420 505-***-****
SHOP FOREMAN 1995 -1997
Supervised maintenance shop personnel, including mechanics, welders and truck drivers. Responsibilities included monitoring the location of all equipment at all work sites throughout the Navajo Reservation of New Mexico, Arizona and Utah, and ensuring that the equipment was properly maintained and in working order. Also coordinated service and fueling schedules. I operated various types of hand, power, and pneumatic tools and equipment. Job required strong reliance on Word and Excel computer programs. I began as a field mechanic and rapidly advanced to shop foreman.
BHP Billiton
300 W Arrington St Ste 101, Farmington, NM 87401 505-***-**** JOURNEYMAN DIESEL MECHANIC - SHOP LEADMAN
1981-1995 Supervised shop personnel mechanics, welders. Performed preventive maintenance on coal mining equipment, repairs and trouble shoot mechanical issues. Complied with MSHA and OSHA. Responsible for the safe, effective maintenance of CAT type equipment through preventative and corrective maintenance practices. Involved in the completion of work orders, creation of work notifications and provision of feedback onto a planned maintenance system. Basic computer use of Windows programs.
U.S. MARINE CORPS KANEOHE BAY, HAWAII
E-4 CORPORAL / TRACKED VEHICLE MAINTENANCE TECHNICIAN 1979-1981 Graduated from Tracked Vehicle Maintenance School and began work as a maintenance technician in the repair and maintenance of amphibious tracked military equipment. I received meritorious promotions. Honorably Discharge
REFERENCES
Kyle Brady Sundt 505-***-****
Amanda
Clark
FEMCO 412-***-****
Leonard
Palmer
BHP 505-***-****
James
Blevins
Truckmo
ve
rs Depot
CERTIFICATIONS & LICENSES
MSHA 500*-**-**-**
GHS 1-17-16
OSHA 1-18-16
OSHA HAZARDOUS
COMMUNICATIONS
1-17-16
FORKLIFT 4-24-18
CPR 1-18-17
FIRST AID 1-18-17
EDUCATION
U.S. MARINE CORPS
KANEOHE BAY, HAWAII Amphibious
Tracked Vehicle Maintenance
EASTERN ARIZONA COLLEGE
SAFFORD, ARIZONA
Building Construction and HVAC/R
OHIO UNIVERSITY
SAFFORD, ARIZONA
Business
VICTORVILLE VALLEY COMMUNITY
COLLEGE VICTORVILLE,
CALIFORNIA
ASE Certification in Automotive Engine
Performance General Business
F.C.I. PHOENIX
PHOENIX, ARIZONA
6000 hour Electrical Components
Apprenticeship
SAN JUAN COLLEGE
FARMINGTON, NEW MEXICO Commercial
Driver Class “A” CDL
Contact this candidate