Flatbed Driver Material Coordinator
Resume:
Anthony Stokes Resume
Name:
Anthony stokes
Email:
adnocp@r.postjobfree.com
adnocp@r.postjobfree.com
Phone:
910-***-****(H) 910-***-****(C)
Home Location:
Fayetteville, NC 28303
Experience: Certificate # 101 6 wheel dump truck with plow, tailgate spreader and tarp-12/11/2009
Certificate # 102 Tractor with side or rear mower 12/11/2009
CPR/AED/First Aid Training- 11/20/2009-11/20011
Drug Alcohol Training for CDL Employees (Delaware Dept. of Transportation)
Saia Motor Freight Line, LLC.
11465 Johns Creek Parkway
Suite 400
Johns Creek GA 30097
Position: Pick-up and delivery driver
7/2019-8/2020
Salary: $23.45 Hourly
Terminal Manager: Tyrone Ellerbe. 910-***-****
Operate Tractor trailer driver pick-up
and delivery of customer’s commodities, responsible for safe operation of company equipment. Operate and maintain forklift in accordance with company and Osha guidelines.
Estes Transport: 866-***-****
3901 West Broad Street
Richmond, VA 23230
Position: Flatbed Driver/specialized division
From: 3/2017 – 7/2019
Salary: $20.83 Hourly
Supervisor: Bobby Colandrea: 919-***-****
Operate Tractor trailer driver pick-up
and delivery of customer’s commodities, responsible for safe operation of company equipment
City of Fayetteville Number of employees supervised: 6
phone number 910-***-****
455 Grove Street
Fayetteville, NC 28304
Position: Transit Supervisor
From: 3/2015 – 3/2017
Salary: 29,000.00 a year
My supervisor: Tony Means
Job Description: To supervise, assign, review, and participate in the work of staff responsible for providing mass transit service with the Transit Department; and to provide a variety of technical task relative to assigned area of responsibility.
Waste Management Hours of work: 45-55 weekly
Tom Starling Road
Fayetteville, NC Hourly salary $13.00 Hr.
11/2014 – 3/2015
Supervisor: Harold Ballard
WM Headquarters
1001 Fan-in, Suite 4000
Houston, Texas 77002
Phone: 713-***-****
Job Description: Drivers are responsible for the collection and hand loading of residential waste, as well as the transporting of this waste by a front-load or rear-load truck to a landfill site. The position routinely requires extensive near-continuous physical exertions such as repetitive lifting, pushing, and pulling receptacles that weigh from 50 to 75 pounds as part of their rigorous daily routine. Note: The level of physical effort may vary from site to site and in some cases be greater or lesser than documented here. Often, these waste receptacles have no wheels or handles for maneuverability, and the driver must have the physical strength to adjust accordingly. This physically strenuous position involves mounting and dismounting the truck between 800 and 1000 times every shift and constantly exposed to unpleasant sights and smells.
Cumberland County
Schools
2491 Gillespie St
Fayetteville, NC
28306
12/2013-11/2014
Operate Dumb truck, backhoe, hand tools and other landscape equipment.
Greyhound Lines Inc.
greyhound.com
Dallas, Texas 75266-0691
4/2013-12/2013
Hours work: 40
Monthly salary $1900
Supervisor: Richard Hurley
Hours worked per week: 45
Monthly Salary: $25,000.00
# of Employees Supervised: 0
Name of Supervisor: Leonard Ellis - City Manager
An Operator drives the motor coach safely with or without passengers onboard, responds to calls from Dispatch; arrives at assigned terminal and picks up trip envelope. Drives to the point of destination in a safe manner according to the schedule; adheres to traffic laws and DOT regulations; follows proper procedures when arriving at a location. Maintains awareness of driving conditions; scans environment for possible safety hazards. Conducts a comprehensive pre-trip inspection and post-trip inspection of the motor coach to ensure safe operating conditions. Obtains and reviews the inspection book from the motor coach before operation; visually inspects the inside and outside of the motor coach and brake system following a checklist; documents mechanical malfunctions or other motor coach problems on the proper form; verbally notifies the mechanic of mechanical malfunctions; receive
notification from mechanic of action to take; determines if the motor coach is safe for operation. Conducts post-trip inspection; manually inspects the lights, tires, safety equipment and brake system following a checklist; documents mechanical malfunctions or other motor coach problems.
City Of Fayetteville
455 Grove Street
Fayetteville, NC 28301
Transit Operator
Pay:$13.00 HRLY
(910) 433 - 1522
4/2/2011 – 4/2013
1.Drive and maintain a transit route and schedule; transport passengers along route; assist passengers in loading and unloading as needed; operate specialized loading and unloading equipment to assist wheelchair passengers.
2.Tactfully greet passengers; answer questions and provide information to the general public regarding transit schedules, rules, regulations, routes and other information; refer sensitive inquiries and complaints to appropriate staff.
3.Collect, count and record transit revenues for assigned route; provide change for passengers as necessary.
4.Operate a two-way radio; report accidents and road hazards; provide staff support in accident investigation.
5.Prepare and inspect assigned vehicle for daily operations; check and maintain fluid levels; perform preventative maintenance and minor repairs as necessary; maintain and submit vehicle mileage records as requested.
6.Ensure safety regulations, rules and codes are enforced and obeyed by passengers in assigned vehicle; report persistent violators.
Cumberland County Schools
Post office box 2357
Fayetteville, NC 28302
Bus Driver
Pay: $11.00 HRLY
11/2010 – 4/2011
Drive gasoline, diesel, or electrically powered multi-passenger vehicles to transport students between neighborhoods, schools, and school activities.
Check the condition of a vehicle's tires, brakes, windshield wipers, lights, oil, fuel, water, and safety equipment to ensure that everything is in working order.
Comply with traffic regulations in order to operate vehicles in a safe and courteous manner.
Follow safety rules as students are boarding and exiting buses, and as they cross streets near bus stops.
TMC Transportation
6115 SW Leland Avenue Des Moines, IA 50321
Position: Truck Driver
9//2010 - 11/2010
Operate Tractor trailer flat bed truck pick up
and delivery of customer’s commodities, responsible for safe operation of company equipment.
Department Of Transportation
800 Bay Road
Dover, De 19903
Position: Equipment Operator I
9/ 2009- 9/ 2010
302-***-****- Libby Craven
Drives and controls on/off-road equipment to haul supplies to and from the work site. This may include public highway systems.
Manipulates equipment with integrated mechanical, hydraulic, and electronic systems/controls by coding computers and or adjusting levers, gears, valves, switches and related controls.
Operates mobile equipment and hand tools to dig, ditch, slope, strip, grade, backfill, mow, and clear and excavate.
Loads and unloads rock, debris, earth, trees and materials, such as abrasives, de-icing chemicals/hazardous material using hands, loaders, trucks, hand-truck, forklift, dolly-lift and hoist.
Operates hand tools such as jackhammers, mechanical tampers, power saws, air compressors, hydraulic drivers, and similar equipment to make general repairs of roads, grounds, and/or structures.
Performs construction/maintenance and repairs in a variety of labor/trades fields such as carpentry, welding, and masonry.
Responds to environmental/highway emergency situations to control snow, storm water, hazardous debris, oil spills, etc. on roads, grounds and related areas.
Uses traffic control techniques to control high/low speed vehicular traffic movement.
Performs preventive maintenance, operational checks, pre, and post walk around inspections, and makes minor repairs/adjustments of assigned equipment; reports damage and /or required maintenance.
May operate draw and swing bridges to permit both water and roadway traffic to pass safely.
HL Trucking & Sons
Bridgeville, DE
Regional Driver (Reefer) 9/2009-9/2010
Contact: Hank Lovett: 302-***-****
MC# 390510
DOT#897680
Operate Tractor trailer driver pick up
and delivery of customer’s commodities, responsible for safe operation of company equipment.
Lear Siegler Service
Bldg: 2-2404 woodruffs St.
Ft. Bragg, NC 28310
Ft. Bragg Truck Driver
5/ 2008- 9/2009
Material Coordinator Utilize precision-measuring equipment such as calipers, tape measures, and micrometers.
Work involves operating a tractor-trailer, heavy truck, light truck, and/or forklift in support of daily operations responsible for transport/route materials to designated end. user or storage locations~ verify materials against shipping/receiving documents, note and report discrepancies or obvious damage, mark material with identifying information, store, stack and palletize materials, rearrange and conduct physical inventories of stores material, examine stored materials and report deterioration or damage remove material from storage and prepare material for excess using proper procedures, fill requisitions, work orders, or requests for material. Perform other duties as position requires.
Eaton Electrical Inc.
1900 Doc Bennett Rd,
Fayetteville, NC 28306
7/2004- 5/2008
Contact: Jamita O’Bannon 910-***-****
Responsible for performing fabrication work on a repetitive and /or non-repetitive basis
Skills.
As required dial in programs manually or existing programs.
Provide assistance to other sheet metal fabricators. Operate
spot welding machine, power grinder, power
sanders, hand-tools, band saw, drills, temporary fix Turing
devices, jigs, and fixtures, and other metal
fabrication equipment. Forklifts, hand jack and overhead cranes were
Also part of job certification.
Inspect parts periodically or as directed utilizing
manufacturing information such as
drawings/blueprints, make necessary adjustments as
required. Keep accurate piece count and other.
Employer: Eaton Corporation
Title: Manufacturing technician
Location: Fayetteville, NC
Duration: 07/2004 - 09/2007
Job Duties: feeder operator:
electrical feeder operator Assume responsibility for
Overhead crane operation: certification, 11.5 contact Hours, 1.2 continuing Education Units. September 9, 2004.
Perform fabrication work on a repetitive
and/or non-repetitive basis. As required dial in programs
manually or existing programs. Provide assistance to
other sheet metal fabricators. Operate spot welding machine,
power grinder, power sanders, hand-tools, and band
Manufacture technician:
Eaton electrical assemble parts for standard and configured
power units .Point to point wiring of small power units.
This position can have responsibility in the following
Areas: Assemble, fit, and mount sub-assemblies, components,
standard, and near-standard fixed assemblies in Aftermarket
and Service Center area. Perform assembly required for test
preparation and final inspection.
Assemble and wire units, relay panels, circuit breakers,
And transformers. Bend and install power wires and harness
as required. Assemble and install doors and panels. Understanding electrical schematic/drawings/method sheets
is necessary to completely assemble products. 1/2004 – 1/2008
J.B.HUNT TRANSPORT; May 2001- January 2004;
615 Corporate Drive Lowell, Ark 72745 over the road driver; pick up and delivery of
Customer commodities. Responsibilities required for safe operation of company equipment.
Education:
LAKEWOOD HIGH SCHOOL, LAKEWOOD NEW JERSEY
BASIC STUDIES, grade point average 2.0, graduated: 1979
Fayetteville Technical Collage
Hull road Fayetteville N.C.
Major:
Business Administration: 2005-2006and 2007-2008 enrolment 3.0
CERTIFICATES AND LICENSES
CDL class a #22329971 North Carolina
Additional Skills And Qualifications; 364 hour Aircraft pneudraulic systems Mechanic course, PDS code ACP,USAF Technical Training school Chanute AFB, Illinois, July 30 1981
Overhead crane operation: certification, 11.5 contact Hours, 1.2 continuing Education Units. September 9, 2004. Forklift training and safety class, August 2004.
Contact this candidate