MANIKANDAN. T

Senior Engineer – Civil & Structural

MANIKANDAN T

SENIOR DESIGN ENGINEER – CIVIL & STRUCTURAL (CHENNAI) I have 12+years of working experience in Civil & Structural Engineering. Contact no. +91-996*******

Email id: adnize@r.postjobfree.com

Key Qualifications:

Oil & Gas projects

* Analysis and Design of Steel Modules using STAAD Pro like,

• PAR (Pre-Assembled Rack)

• PAU (Pre-Assembled Unit)

• Stick built

* Following Pre-service Analysis of structures,

• Set down Analysis

• Spring Analogy approach (Land transportation using SPMT)

• Balanced load Analysis (Land transportation using SPMT)

• Barge Analysis (Sea transportation)

* Design code used is American Code & British code.

* Skilled in applications such as STAAD.PRO and MAT3D. Power plant projects

* Analysis of various structures using by STAAD Pro.

* Structural Analysis, Design and Detailing of various RCC & Steel Structures like junction tower, pipe rack, balance of plant (BOP) structure, Equipment foundation and fan foundation in power plant.

* Preparing all design report for steel & concrete Structures.

* Review mechanical and vendor drawings for structural adequacy and for civil input data.

* Active coordination with other departments solving the issues to avoid the clashes as per requirements.

* Active coordination with client to solve the issue in site.

* Knowledge of international standards (Euro) and Indian Standards.

* Skilled in applications such as STAAD.PRO, STAAD Foundation and MAT3D. Paper mill projects

* Analysis of various structures using by STAAD Pro.

* Structural Analysis, Design and Detailing of various RCC Structures and Equipment foundation.

* Preparing all design report for concrete Structures.

* Active coordination with client to solve the issue in site.

* Knowledge of Indian Standards.

* Skilled in applications such as STAAD.PRO.

MANIKANDAN. T

Senior Engineer – Civil & Structural

EXPERIENCE

Saipem India Projects Pvt Ltd, Senior Design Engineer – Civil & Structural From March 2021 to May 2021

Project: MOZAMBIQUE LNG, CABO DELGADO PROVINCE

Owner: Anadarko Mozambique

Design Experience: ACI code

* Analysis and design of structural steel pipe racks.

• Size 15m(W) x 74m (L) x 20.3m(H) (Steel Quantity = 711T)

* Analysis and design of Horizontal Vessel supporting structure.

• Size 19.6m(W) x 24m (L) x 15.8m(H) (Steel Quantity = 143T)

* Design of base plate using by excel sheet.

* Design of foundation using by MAT 3D software.

* Preparation of design document.

From June 2019 to June 2020

Project: CLEAN FUEL PROJECT, SIRRACHA, THAILAND

Owner: Thai oil public company limited

Design Experience: ACI code

* Analysis and design of structural steel pipe racks.

• Size 6m(W) x 24m (L) x 25m(H) (Steel Quantity = 167T)

• Size 6m(W) x 24m (L) x 25m(H) (Steel Quantity = 160T)

* Analysis and design of Horizontal Vessel supporting structure.

• Size 13m(W) x 36.5m (L) x 21.425m(H) (Steel Quantity = 822T)

• Size 12m(W) x 31.5m (L) x 14.15m(H) (Steel Quantity = 173T)

* Design of base plate using by excel sheet.

* Design of foundation using by MAT 3D software.

* Preparation of design document.

Petrofac Engineering Services India Pvt Ltd, Senior Design Engineer – Civil & Structural From Oct 2018 to May 2019

Project: EPC FOR QUSAHWIRA FIELD DEVELOPMENT PHASE-II Owner: Abu Dhabi Company for Onshore Petroleum Operations Ltd. (ADNOC Onshore) Design Experience: ACI code

* Analysis and design of existing pipe racks to check the adequacy for additional piping load.

* Analysis and design of shelters.

• Size 25m(W) x 58m (L) x 30.75m(H) (Steel Quantity = 488T) MANIKANDAN. T

Senior Engineer – Civil & Structural

* Design of base plate using by excel sheet.

* Design of foundation using by MAT 3D software.

* Preparation of design document.

MAY 2014 to OCTOBER 2018

FICHTNER Consulting Engineers, Chennai, India Senior Design Engineer – Civil & Structural From Apr 2018 to October 2018

Project: SUPERCRITICAL COAL BASED UPPUR THERMAL POWER PLANT (2x800MW) Owner: TAMILNADU GENERATION AND DISTRIBUTION CORPORATION LIMITED (TANGEDCO) Design Experience: Indian code

* Analysis and design for non-plant structure of following structure (Substructure & superstructure)

• Administrative building

• Canteen building

• Construction store

• Quality lab

* Analysis and design for Ash handling system of following structure (Substructure & superstructure)

• MCC/Control room

• Ash water recovery pump house

• Ash water sump house with pump house

* Design of Compound wall.

* Design of foundation using by STAAD foundation software.

* Checking of detailed drawing as per Design, Specifications and codal provision.

* Preparation of design document.

From Dec 2017 to Mar 2018

Project: JAWAHARPUR SUPER THERMAL POWER STATION (2x660MW) Owner: JAWAHRPUR VIDYUT UTPADAN NIGAM LIMITED (A UP GOVERMENT UNDERTAKING) Design Experience: Indian code

* Analysis & Design of Junction tower in power plant.

• (Size 13m(W) x 13.5m (L) x 67.45m(H) (Steel Quantity = 455T)

* Design of base plate using by excel sheet.

* Preparation of Load calculation.

* Optimized steel tonnage of junction tower to meet the client fixed tonnage.

* Preparation of design document.

From Apr 2017 to Nov 2017

Project: 1 X 800MW - NCTPP – STAGE III ENNORE & PUZHUDHIVAKKAM VILLAGE, CHENNAI, TAMILNADU Owner: TAMILNADU GENERATION AND DISTRIBUTION CORPORATION LIMITED (TANGEDCO) Design Experience: Indian code

MANIKANDAN. T

Senior Engineer – Civil & Structural

* Review of Analysis and design of balance of plant (BOP) structures such as switchyard control building, sea Water treatment, water treatment facility, Fuel oil system, Coal handling system, Ash handling system.

* Review of Analysis & Design of pipe racks.

From Sep 2016 to Mar 2017

Project: EFFLUENT TREATMENT PLANT, MALAYSIA

Owner: PETRONAS

Design Experience: Euro code

* Analysis & Design of structural steel pipe racks.

* Design of base plate using by excel sheet.

* Design of pile cap using plate models.

* Structural analysis and design as per EN 1993 (Euro code)

* Design of connection (Moment & Shear connection and Horizontal & Vertical bracing) as per EN 1993 (Euro code)

* Lead the team for whole pipe rack in the plant including checking of Sub & superstructure drawings.

* Preparation of design document.

Project: 50TPD TITANIUM DI-OXIDE PLANT

Owner: Kilburn chemicals limited

Design Experience: Indian code

* Analysis and design for process buildings of following structure (Substructure & superstructure)

• Acid concentration section (RCC building with steel roof)

• Illmenite-milling & digestor building (RCC frame to certain height with steel operating floor & roof Truss)

• Black chilling-FSH drying section building (RCC building with steel roof)

• HAG-Calciner-Cooler section building (RCC building with steel roof)

• Hydrolysis-Nuclie-Washing-Leaching building ((RCC building)

• Rutile coating-Finished product storage building (RCC building)

* Analysis and design for Non plant buildings of following structure (Substructure & superstructure)

• Administrative building

• Mechanical store

* Design of pile & pile cap using by MAT 3D software

* Analysis & Design of structural steel pipe racks.

* Design of base plate using by excel sheet.

* Checking of detailed drawing as per Design, Specifications and codal provision.

* Preparation of design document.

Apr 2015 to Mar 2016

On Deputation to Petrofac Engineering Services India Pvt Ltd, From Sep 2015 to Mar 2016

Project: YIBAL KHUFF PROJECT (YKP)

Owner: Petroleum Development Oman (PDO)

MANIKANDAN. T

Senior Engineer – Civil & Structural

Design Experience: British code

* Analysis & Design of Steel Modules by British code

* In-place Analysis: Analysis of structure during operational condition while withstanding gravity, wind, seismic, thermal, frictional, anchor, live, erection loads whenever applicable during its design life.

From July 2015 to Aug 2015

Project: RABAB HARWEEL Integrated project (RHIP)

Owner: Petroleum Development Oman (PDO)

Design Experience: Euro code

* Analysis & Design of Steel Modules like PAR (Pre-Assembled Rack) by BS EN code

* Six analysis is done for a single structure and the analysis are as follows

• In-place Analysis: Analysis of structure during operational condition while withstanding gravity, wind, seismic, thermal, frictional, anchor, live, erection loads whenever applicable during its design life.

* Pre-service Analysis: Structure is analyzed and designed for transportation and lifting purpose. The following are the different pre service conditions considered for analysis

• Set down Analysis (Loss of support): Steel potential ground unevenness when placing the structure on temporary supports shall be considered in thisanalysis.

• Land Transportation analysis: Structure to be transported by trailers is capable of withstanding imposed loading without member over-stress or unacceptable deformations. This analysis is performed by two approaches

Spring Analogy Approach: In this approach the analysis is carried out by modeling the SPMT (Self Propelled Module Trailer) supports as spring supports.

Balance load Method: In this method three zones are created in a set of load out trailers which can provide a statically determinate support system for the structure. The Centre of Gravity of the structure must lie within the stability triangle formed by the hydraulic centers of the three zones.

• Sea Transportation analysis: Structure to be transported by barge is capable of withstanding imposed loading without member over-stress or unacceptable deformations.

From Apr 2015 to July 2015

Project: Upper Zakum 750 Islands Surface Facilities Project-EP2, Abudhabi Owner: ZADCO (Zakum Development Company)

Design Experience: American code

* Analysis & Design of Steel Modules like PAR (Pre-Assembled Rack). Example for

• Pipe rack Sizes 7m(W) x 54m (L) x 15.085m(H) (Steel Quantity = 154T)

• Pipe rack Sizes 7m(W) x 54m (L) x 12.085m(H) (Steel Quantity = 134T)

* Six analysis is done for a single structure and the analysis are as follows MANIKANDAN. T

Senior Engineer – Civil & Structural

• In-place Analysis: Analysis of structure during operational condition while withstanding gravity, wind, seismic, thermal, frictional, anchor, live, erection loads whenever applicable during its design life.

• Future Analysis: Analysis of structure during operational condition by also considering the future piping and equipment loads in the design.

* Pre-service Analysis: Structure is analyzed and designed for transportation and lifting purpose. The following are the different pre service conditions considered for analysis

• Set down Analysis (Loss of support) : Steel potential ground unevenness when placing the structure on temporary supports shall be considered in this analysis.

• Land Transportation analysis: Structure to be transported by trailers is capable of withstanding imposed loading without member over-stress or unacceptable deformations. This analysis is performed by two approaches

Spring Analogy Approach: In this approach the analysis is carried out by modeling the SPMT (Self Propelled Module Trailer) supports as spring supports.

Balance load Method: In this method three zones are created in a set of load out trailers which can provide a statically determinate support system for the structure. The Centre of Gravity of the structure must lie within the stability triangle formed by the hydraulic centers of the three zones.

• Sea Transportation analysis: Structure to be transported by barge is capable of withstanding imposed loading without member over-stress or unacceptable deformations.

From May 2014 to Mar 2015

On Deputation to Technip Engineering India Pvt Ltd, from Project: Yamal LNG Project

Design Experience: SNIP II-23-81 (Russian code)

* Analysis & Design of Steel Modules like West Inter-connecting Pipe Rack, LNG Train, Power Generation, Flare and Pipe Bridges at road crossing. See procedure below, INPLACE ANALYSIS

* Review of Piping, electrical and instrumentation inputs.

* Review Pipe loads.

* Preparation of Load calculation.

* Optimization of the structural sizes with respect to Weight control report (WCR).

* Preparation of foundation loading data.

* Providing inputs for TEKLA modeling.

* Review of Steel GA drawings, extracted from TEKLA.

* Preparation of design calculation.

LAND TRANSPORTATION (LT) ANALYSIS

* In-place STAAD model is carried to LT analysis and design.

* Stability calculation with respect to trailer arrangement (SPMT – Self-propelled Modular transporters).

MANIKANDAN. T

Senior Engineer – Civil & Structural

* Strength check for trailer arrangement beams.

* Load balancing calculation (Wind Load, Acceleration & slope due to road).

* Strength and Serviceability check by AISC ASD Manual.

* From the above results, structural adequacy is verified and if required additional members shall be introduced in the STAAD model to take care of the stability.

* Analysis and design of LT support girder beam.

* Preparation of Calculation note.

* Review of inter disciplinary drawings from piping, electrical & instrumentation prior to issue for review and construction.

* Review of 3D model for clash checks.

HAMON RESEARCH COTTRELL INDIA PVT LTD, Chennai, India Senior Engineer – Civil & Structural DEC 2012 to APR 2014

Project: SCRUBBER FABRIC FILLTER

* Design of Front and side wall.

* Preparing design document.

* Checking the output drawings & give the comments to designers.

* Inter Discipline/Departmental co-ordination.

Project: O MON UNIT 2 THERMAL POWERPLANT (1x300MW)

* Analysis and Design of pipe rack.

* Design of base plate using by excel sheet.

* Preparation of Load calculation.

* Checking of detailed drawing as per Design, Specifications and codal provision.

* Preparation of design document.

Project: THAI BINH 2 THERMAL POWERPLANT (2x600MW)

* Analysis and design for Ash handling system of following structure (Substructure & superstructure)

• MCC/Control room

• Ash water recovery pump house

• Ash water sump house with pump house

* Analysis and design for Coal handling system of following structure (Substructure & superstructure)

• Junction tower

• Cooling water pump house

* Analysis and design for Fire water pump house of following structure (Substructure & superstructure)

• Fuel oil unloading pump area

* Analysis and design for Water treatment facility of following structure (Substructure & superstructure)

• Filter water tank and pump house

• RO stage building

• Electro chlorination building

• CPU regeneration RCC building

* Analysis and design for Pipe racks (Substructure & superstructure).

* Design of base plate using by excel sheet.

MANIKANDAN. T

Senior Engineer – Civil & Structural

Project: CEMIG THERMAL POWERPLANT (1x300MW)

* Analysis and Design of pipe rack.

* Design of base plate using by excel sheet.

* Preparation of Load calculation.

* Checking of detailed drawing as per Design, Specifications and codal provision.

* Preparation of design document.

VICI ENGINEERS AND CONSULTANTS INDIA PVT LTD, Chennai, India Design Engineer – Civil & Structural SEP 2010 to NOV 2012

Project: MARIB POWER PLANT SUBSTATION (132KV)

* Analysis and design of RCC Control room building (Size = 23m (L) x 19m (W) x 7m (H))

* Analysis and design of following structure (Substructure & superstructure)

• Post Insulator (BPI)

• Current Transformer (CT)

• Isolator Structure (IS)

• Light Arrester (LA)

• Potential Transformer (PT)

• Circuit Breaker (CB)

* Design of base plate using by excel sheet.

* Checking of detailed drawing as per Design, Specifications and codal provision.

* Resolving Site Clarifications.

* Preparation of design document.

Project: JK PAPER MILL

* Analysis and design of following RCC structure (Substructure & superstructure)

• Evaporator & Recaustisizer MCC room (Size = 30 (L) x 12m (W) x 12m (H))

• New chipper house (Size = 12m (L) x 12m (W) x 12m (H))

• Recovery boiler & cooling tower (Size = 32.5m (L) x 12m (W) x 12m (H))

• CLO2 Plant (Size = 41.5m (L) x 24m (W) x 37.45m (H))

* Analysis and design for Pipe racks (Substructure & superstructure).

* Design of base plate using by excel sheet.

* Design of pump foundation in Evaporator, Limekiln, recaustizing plant & recovery boiler area.

* Checking of detailed drawing as per Design, Specifications and codal provision.

* Resolving Site Clarifications.

* Preparation of design document.

Project: BILT PAPER MILL

* Analysis and design of following RCC structure (Substructure & superstructure)

• Evaporator & Recaustisizer MCC room (Size = 30 (L) x 12m (W) x 12m (H))

• CLO2 Plant (Size = 41.5m (L) x 24m (W) x 37.45m (H))

* Analysis and design for Pipe racks (Substructure & superstructure). MANIKANDAN. T

Senior Engineer – Civil & Structural

* Design of base plate using by excel sheet.

* Design of pump foundation for Caustic circulation pump, NAOH booster pump, Condensate supply pump, H2O2 booster pump, H2O2 pump storage tank, Shower pump, Sulphuric acid truck supply pump.

* Checking of detailed drawing as per Design, Specifications and codal provision.

* Resolving Site Clarifications.

* Preparation of design document.

HOCHTIEF INDIA PVT LTD, Chennai, India Engineer – Civil JUNE 2008 to AUG 2010

Project: EKPPT MOTORWAY BRIDGE

* Worked as an engineer in this project and the works involves preparation of design documents, preparation of detailed drawings and checking of detailed drawings for various structures. Project: ELBPLHARMONIE HAMBURH PROJECT

* Worked as an engineer in this project and the works involves preparation of design documents, preparation of detailed drawings and checking of detailed drawings for various structures. Project: NATIONALWIDE CHILDREN HOSPITAL

* Worked as an engineer in this project, and the works involves 3D Modeling for the whole building using by ADT Software

Project: BARWA COMMERCIAL AVENUE DOHA

* Worked as an engineer in this project, and the works involves preparation of detail drawings and Estimation of whole project.

EDUCATION

Master of Engineering – Structural (2012-2014)

St’s peters University, Chennai, Tamilnadu, India

Bachelor of Engineering – Civil (2005-2008)

IRTT, Erode, Tamilnadu, India

Diploma in Civil Engineering (2003-2005)

Salem polytechnic, Salem, Tamilnadu, India

CERTIFICATION

I, the undersigned, certify that to the best of my knowledge and belief, these data correctly describe me, my qualifications, and my experience.

DATE: SIGNATATURE

Contact this candidate