MUHAMMAD THAHIR

Mobile: +62-813-****-**** / +62-896-****-****

Email: adncw6@r.postjobfree.com

Passport No: C1757935 (valid till 1 Oct 2023)

PROJECT MANAGEMENT PROFESSIONAL PROFILE

Highly motivated, multi skilled Senior Project Engineer/Manager with overall 20 years of experience in project management, executing Oil & Gas EPC, construction project management & control (engineering, procurement, construction, installation and sub contract management, experience of change and claim management, with proven ability to direct all project phases and complete projects scope of works, on time, on cost/budget and as per agreed QHSE standards. Experience in Oil & Gas, Offshore Platforms, Pipelines, LNG Port & Terminal, Energy, Petrochemicals, etc.

Core Competencies

Drives results

Plans and aligns

Customer focus

Collaborates

Effective communication

Being resilient

Business insight

Strategic mindset

Current location:

Karawang, Jawa Barat - Indonesia

Nationality:

Indonesia

Preferred Sector of Employment:

Oil, Gas, Energy and Petrochemical

Spoken languages:

English, Bahasa

QUALIFICATION

1999 Degree S1 Electrical Engineering from Hasanuddin University

PROFESSIONAL RECORD

Jul 2019 – Current

PT SAIPEM INDONESIA – ONSHORE PROJECT

SENIOR PROJECT MANAGEMENT

Projects :

BRITISH PETROLEUM BERAU LTD: EPCC for TANGGUH EXPANSION PROJECT, Natural Gas Liquefaction in Bintuni Bay, Papua, Indonesia.

The facility includes associated onshore infrastructure, two offshore platforms, pipelines and twelve wells. These facilities are the Trains 1 and 2 developments at Tangguh.

Tangguh Expansion Project to commercialize the incremental resource into high margin gas markets based on a single LNG (liquefied natural gas) train expansion (Train 3).

Tangguh Expansion Project consist of new offshore facilities, including wellhead platforms and pipelines, and onshore development on the existing Tangguh brownfield site. The new onshore facilities will include one additional natural gas liquefaction train of a similar design and capacity to the existing trains, an onshore receiving facility (ORF), new LNG and condensate loading berth, additional boil off gas (BOG) recovery, utilities, flares and the infrastructure to support logistics and the associated increase in the temporary and permanent workforce.

Project comprises of the following new facilities:

[New] Onshore Receiving Facility (ORF)

•[New] LNG Train 3

•[New] Condensate Stabilization Train 3

•[New/Inter connection] Plant Utility Facilities

•[New] LNG Loading System

•[New] Condensate Loading System

•[Expansion] Integrated Control and Safety System (ICSS)

•[Expansion] Telecommunication System

•[New] Trestle Jetty Structure

•[Expansion] Onshore Infrastructure

•Hazardous and Non-hazardous Waste Management System

PRINCIPAL DUTIES AND RESPONSIBILITIES

Reporting to the Project Director

- To direct, control and co-ordinate the execution of projects, under the leadership of the Senior Project Manager, involving technology equipment, engineering and services to achieve project completion on time, within budget and at the required levels of quality taking into account safety and reliability.

- To assist the Senior Project Manager in providing project input, in the areas of scope definition and preparation of engineering data, for the preparation of customer bids/proposals.

Responsibilities will include:

Being the overall project lead for the engineering and construction work performed by the assigned Contractor. This will generally involve:

-Linking the office Project Engineering design role with the field construction activities

-Solving technical problems and ensuring the resolution of Technical Queries in a timely manner

-Solving missing material issues

-Anticipating issues before they occur. Having a strong grasp of the manpower and skill requirements of the GC and ensuring that these are available.

-Coordinating the construction management to deliver the work on budget and schedule.

-Maintain an open and effective communication channel with Construction Management and with the Site Project Manager

-Represent the Company in meetings with the Client, interfacing EPC’s, sub-contractors, vendors, and other stakeholders. Lead meetings and record minutes of meetings as required.

-Manage the Client at the Site as necessary

-Support the interests of the Site Project Manager and the Overall Senior Project Manager at the site, in relation to safety, security, cost optimization and management, and schedule control

-Support and promote the implementation of the Project Safety, Security and Quality plans

-Support and promote the implementation of the Project Execution Plan

-Provide strong leadership and coordination to ensure working effectively to achieve the project KPI’s. Identify and address risks and issues, escalating to the Site Project Manager and Senior Project Manager as required

-Provide leadership to ensure prompt prioritization and coordination of all unforeseen issues at the site, escalating to the Site Project Manager and Project Director as required. Provide cross-functional coordination on site, with external stakeholders, and with the offshore team as required.

-Manage all expenditures at the site in accordance with Company and Project Procedures, and Delegation of Authority

-Manage time capture and approvals for all reimbursable supervision team resources

-Deputies for the Project Manager when the Project Manager is not available

-Write regular progress reports as required by the Site Project Manager and Senior Project Manager

2015 - 2019

ASIA PULP AND PAPER, SINARMAS

LEAD I&C PROJECT

Pulp & Paper Projects: To increase the consistency to the range of 15% to 25%, vacuum systems, such as suction boxes or suction rolls, are usually used. The creping process to produce tissue products with higher bulk, absorbency, softness, and stretch.

Projects:

•Tissue Machine Block #15, Stock Pulp Preparation, drying, pressing, cutting, reeling, converting and rewinding.

•Tissue Machine Block #9, Stock Pulp Preparation, drying, pressing, cutting, reeling, converting and rewinding.

•Brown Paper conversion PD#3, Stock Pulp Preparation, drying, pressing, cutting, reeling, converting and rewinding.

RESPONSIBILITIES

-Acquires and understands the Project goals from Contract, specific documentation and the kick-off meeting.

-Contributes to define the Discipline list of activities, list of deliverables, time schedule, control of Discipline activities in accordance with Contract requirements.

-Produces a detailed list of in / out critical information to be closely monitored by PEM for a correct course of the project.

-Produces the methodologies / Design Premises comprehensive of all necessary data, general and specific design guidelines.

-Prepares and performs the Instrumentation design review.

-Ensures the achievement of assigned goals and the fulfillment of the project quality requirements and the contractual obligations.

-Takes any corrective action within the Specialists group necessary for this purpose or reports to PEM for more extensive problems.

-Calculates and monitors performance indicators in accordance with the technical instruction.

-Technical reference for Specialists and Designers and ensures the participation to the interdisciplinary activities.

-Monitors and reports actual progress / check for Discipline activities, including control of men-hours and delivered documents; particular care is required for sub-contracted activities.

-Coordinates the evaluation of the design changes to the original scope of work and verifies the implementation of those approved.

-Is aware and keeps track of all interface ( in / out ) information.

-Checks and signs all produced documents (internal or subcontracted) like design reports, technical specifications, drawings, etc.

-Attends to internal review activities and inter-discipline check meetings.

-Provides technical support to Project group.

-Reports to the Project staff and to the Client whenever required.

-Prepares the feedback dossier.

2014 – 2015

PT. MEINDO ELANG INDAH

LEAD OF INSTRUMENT & CONTROL

Projects :

PT. PERTAMINA PHE ONWJ: EPCI for KL Gas Lift Compressor, Natural Gas Liquefaction in KL Platform, Samarinda, Indonesia.

Scope of work: Installation of Gas Turbine Compressor (2 x 50%) package with capacity 4.5 mmscfd at KLB platform, modification of KLA, KLB dan KLC platform due to additional gas lift system and installation of new 2 pipeline diameter 4” and 10” between KLA – KLB 1.0 mile.

RESPONSIBILITIES

-Acquires and understands the Project goals from Contract, specific documentation and the kick-off meeting.

-Contributes to define the Discipline list of activities, list of deliverables, time schedule, control of Discipline activities in accordance with Contract requirements.

-Produces a detailed list of in / out critical information to be closely monitored by PEM for a correct course of the project.

-Produces the methodologies / Design Premises comprehensive of all necessary data, general and specific design guidelines.

-Prepares and performs the Instrumentation design review.

-Ensures the achievement of assigned goals and the fulfillment of the project quality requirements and the contractual obligations.

-Takes any corrective action within the Specialists group necessary for this purpose or reports to PEM for more extensive problems.

-Calculates and monitors performance indicators in accordance with the technical instruction.

-Technical reference for Specialists and Designers and ensures the participation to the interdisciplinary activities.

-Monitors and reports actual progress / check for Discipline activities, including control of men-hours and delivered documents; particular care is required for sub-contracted activities.

-Coordinates the evaluation of the design changes to the original scope of work and verifies the implementation of those approved.

-Is aware and keeps track of all interface ( in / out ) information.

-Checks and signs all produced documents (internal or subcontracted) like design reports, technical specifications, drawings, etc.

-Attends to internal review activities and inter-discipline check meetings.

-Provides technical support to Project group.

-Reports to the Project staff and to the Client whenever required.

-Prepares the feedback dossier.

2012-2013

SHELL SARAWAK BHD (Malaysia)

SENIOR PROJECT ENGINEER

Well Head Platforms (Engineering, Procurement Fabrication, load out,transportation and installation), Subsea Pipelaying, Pipelay Barge, Shallow water pipelaying by shore pull, SBM Installation, Top side modification of existing Oil Well and Process Platforms including Deck Extension (Engineering, pre fabrication of spools, transportation and installation), NG Compressor Trains skids fabrication, load out, transportation and installation on Platform.

Projects: Maintenance Project Technical Integrity and Fix of 32 platforms (Shell assets)

Responsibilities:

•Reports to Head Projects on all administrative, contractual, technical, and budgetary projects. Acts on behalf of as representative's nominated deputy with technical authority.

•Monitors the performance and quality of works being done in-house or by outside contractors.

•Plans and coordinates assigned projects including preparation of budgets, control and timely commitment of same to ensure that facilities can be handed over to Operations on time and within budget.

•Monitors and takes remedial/corrective actions on overall progress of assigned projects and interfaces with other relevant Departments.

•Identifies resource requirements/deficiencies for assigned projects and evaluates them for suitability for subject requirements.

•Prepares descriptions, justifications, review of cost estimates and outline program for new projects to be included in annual budget and submissions.

•Initiates and assist in developing Department procedures/ guidelines.

•Interfaces with Operations, Field development and other departments to develop statement of requirements and maximize use of in-house resources and expertise.

•Initiates risk assessment of assigned projects, reviews and approves risk assessment and ensures implementation of mitigating actions.

•Identifies commercial/schedule related risks and anticipates problems to projects (from the proposal phase to commissioning). Suggests decision on mitigating actions.

•Reviews and endorses critical Engineering and Design Deliverables such as Design Options Reports

•Prepares all necessary project deliverables required for gate approval in line with gate approval procedure.

•Review and endorse deliverables to be prepared by others required for gate approval including Design Readiness Review, Project Quality Plan, and Project HSE Management Plan.

•Manages and controls Capital budgets to ensure expenditure is in line with approved budgets.

•Reviews scope of work for Front End Engineering and Design (FEED) and Engineering, Procurement, Installation and Commissioning (EPIC) as well as review/prepare necessary Contract documents accordingly.

•Validates and endorses the Value of Work Done against Contractor invoices. Handles the assessment of major and/or disputed Contractors time and cost related claims. Reviews and recommends settlement of undisputed final accounts and variations to contracts.

2011-2012

MMC OIL & GAS ENGINEERING SDN BHD (Malaysia)

SENIOR I&C ENGINEERING, (OFFSHORE)

Well Head Platforms (Engineering, Procurement and Fabrication) Top side modification of existing Oil Well and Process Platforms including Deck Extension

Projects:

•Detailed Engineering for Gas Lift Compressors Enhancement.

•Detailed Design Work on E11-SC1/2/5 De-sander Installation.

•Detailed Design Work on F13E-SC4 De-sander Installation.

•Design, Supply, Fabrication, Transportation, Installation, Hook-up and Commissioning of TBG-A Helideck Fire Suppression System.

•Design South Furious Crude Oil Transfer Pump (P-8060) Replacement.

•Detailed Design South Furious Lease Compression.

Responsibilities:

•Manages the interface between Client’s project team and I&A engineering

design team.

•Coordination all discipline related engineering activities, review and approval

(internal and where applicable Client approval) of deliverables, interdisciplinary

checks and assures compliance with contractual requirements,

e.g. complete delivery of LOD, maximum duration of review cycles,

engineering quality, project schedule, etc.

•Supports overall project management, task management, change/contract

management, progress reporting and development of project presentations.

•Ensure the changes within the process discipline are managed and

communicated to the other discipline in cases they are affected.

•Responses to Technical Queries (TQ’s) and written clarification requests by

3rd parties and attend clarification meetings.

•Technical Document Review: provision of comments, elaborations and recommendations and approval of Basic Design and FEED documents in a timely manner to ensure the design meets the needs of the field development and complies with contractual requirements.

•Review of System Architecture, System block diagram, control narrative, etc.

for control system.

•Review, provision of comments, elaborations and recommendations and

approval of provision of instrumentation and automation discipline analyses

and calculation notes required for the design of the instrumentation

engineering works.

•Review, provision of comments on technical recommendations on the

selection of instrument materials to meet project requirements.

•Review of various instrumentation and automation engineering deliverables

(instrument datasheet, instrument list and I/O list, instrument sizing for flow

element and valves

•Review, provision of comments for scope of work for SIL workshop.

•Review of control system design deliverables for DCS, ESD, and fire and gas

systems, mechanical package control system PLC.

•Review of other discipline documents e.g. P&IDs, Piping GAs, hook-up

drawings, Electrical Control Narratives, HVAC heat dissipation calculations for

the alignment with I&A discipline.

•Actively participates in HSE document reviews & workshops, such as HAZOP,

SIL/LOPA, SIMOPS, etc.

•Actively participates in 3D model reviews.

•Strict adherence to established procedures.

•Support during Tendering

•Provide support during the LLI and EPIC tendering phase.

•Assist with preparation, supervise, review and comment tender documents.

•Assist with bidder pre-qualification.

•Assist with bid evaluation.

•Assist with preparation of final orders, contracts and related documentation.

2008-2010

IMCO ENGINEERING & CONTRUCTION WLL (Kuwait)

SENIOR I&C ENGINEERING

Responsibilities:

•Site survey for data collection of existing system, design & detailed engineering, preparation of data sheets for the field instruments, Preparation of Material requisitions for the instrumentation and control system.

•Evaluation of technical bids, Vendor finalization, Review of vendor documents, preparation of engineering deliverables for the projects, Preparation of BOQ of instrumentation as a part for tendering.

•Review contract requirements for project execution, organize the preparation of the Technical Document Register (TDR), identify requirements and scope of work; review specifications Process Data Sheets (PDS), Piping Material Specifications (PMS), Piping & Instrumentation Diagrams (P&ID’s), Plot plans, General Arrangement (GA) drawings, Review Philosophies, Area Classification Drawings, Fire and Gas Detector Layout Drawings and other relevant documents.

•Interface and regularly meet with client and vendor representatives, conduct internal staff meetings, to ensure the progress of project in accordance to schedule.

•Interact with Quality Assurance for quality issues; strictly ensure compliance with Company’s ISO Quality procedures. Coordinate Internal and Client audit requests; facilitate audit procedures of engineering systems within the department.

•Participate in HAZOP meeting and undertake SIL studies with client and representatives of other engineering disciplines.

•Coordination of hook-up, calibration, cabling, installation, loop-checking, pre-commissioning and commissioning of process control

•Coordination punch list clearance and handover to client.

Project Achievement:

•Installation of Additional Water Injection Pump at MWIP & Brackish Water Transit Pump at Abduliyah Pump Station

•Replacement of Existing Oily and Effluent Water Lines Using RTRP Pipe In GC 23 & GC.

•Capacity Expansion for Compression and Medium Crude Processing At GC-28

List Customer:

•Kuwait Oil Company

DETAILS OF EARLIER EXPERIENCE CAN BE PROVIDED UPON REQUEST

KEY ACHIEVEMENTS & SKILLS

Overall management and safe execution of the large projects ensuring the objectives of the company within the approved budget and resources, managing all aspects of projects including but not limited to budget & business forecasting for EPC operations, engineering management, procurement, logistics, construction and commissioning.

Completed challenging life cycle EPC/M onshore and offshore projects 20 Million to 100 million $ project cost.

Astute in management of budgets, project milestones & project/ equipment performance guarantees

Leadership and team building skills.

C literate in relevant software.

Motivation and supervision skills.

Technical competencies.

Problem solving skills.

Project Management skills

Conflict resolution and negotiating skills.

Presentation skills.

Contact this candidate