Curriculum Vitae

Dwiti Krushna Panda

E-mail: adncp2@r.postjobfree.com

Mobile No: +91-897*******

Present Address: Permanent Address:

Room no. 209, ‘A’ Wing, Raghunath Temple Street

Prisha Appartment, Behind Kamla Arcade, At/Po: Nalabanta Gothivali village, Rabale, PS: Aska

Navi Mumbai, Maharastra 400701 Ganjam, Odisha 761111

.

CAREER OBJECTIVE:

To achieve a position of excellence in the field of Mechanical Engineering, Welding Engineering, Inspection Engineering, QA/QC Engineering by contributing to the achievement of organizational goals & occupying myself with technical skills for the betterment of my career.

Position Sought: - QA/QC Engineer, Inspection Engineer / Surveyor, Welding Engineer Age: - 38 Years

Experience: - 14+ Years

Preferred Location: - India

Job Category: - Mechanical Engineering – Piping Inspector/Welding Engineer/QA/QC NATURE OF RESPONSIBILITIES:

Prepare inspection test plan (ITP) as per contractual requirements and getting approval from client.

Preparation of Quality control checklists, records & inspection reports.

Preparation of procedures, method of statements and check compliance with project specifications.

Co- ordinate with main contractor, third party & client.

Control of calibrated measuring & test equipment used on the project.

Verification of Raw Materials to the specification as per applicable Codes and Standards.

Controlling of welding consumables and Documents.

Reviewing test certificates of welding electrodes, raw material, bolts & nuts as requirement standards.

Inspection of components as per quality plan, Drawings and Operation Process sheet.

Preparing & reviewing WPS/PQR, weld schedule and related qualification documents as per requirement of project according to ASME Sec IX & AWS D1.1, ASME B31.3.

Perform welder qualification in accordance with WPS.

Inspection & testing activities as per the inspection procedure.

To study the isometric drawing received from the clients and to identify the pipe lines and carry out the inspection work.

To check the fit up stage prior & confirm that root gap, off set, bevel angle are within acceptable limit.

Preparation of weld map & maintaining the weld record.

Witnessing in process examination — Welding Inspection — NDE on components.

Co- ordinate with sub-contractor for NDT activities like radiographic testing, magnet particle testing, ultrasonic testing, penetrate testing, TOFD, PAUT.

To select the joint for the NDT as per the welder coverage & line class percentage.

Carry out Penetrate Testing & report preparation.

To witness magnetic particle testing of fillet joints & check the surface & sub surface defects.

Preparation of RT selection list for the Daily Radiography works.

Fabrication, installation, testing & inspection activities carried out as per QAP.

Preparations of test pack & submit to the higher authorities.

Witness of proper assembly and tightening of bolted joints by manual and hydraulic torqueing with proper torque value as per codes and standards during the construction process.

To carry out reinstatement of piping & report preparation.

Witness of Hydro & Pneumatic tests of piping.

Preparation of punch list & clearance to next stage like Erection & painting.

To carry out line punching during the test pack internal review & assistance for the reports preparation.

Perform final inspection on Cleaning, Surface preparation, Galvanizing, Painting & Powder coating.

Maintaining of all inspection report & related documents in QA / QC department.

Conduct all worker activities in the safe & environmental policies & procedure.

For In line pipe inspection, checking weld procedure approval test and welding operator competency test records to ensure both are qualified in accordance with the code requirements. Checking plate identities and compare with mill certification details. Inspection welds preparations. Examination results of non-destructive testing and review radiographs. Witnessing hydrostatic testing. Final visual examination after completion of all work including witness of hydrostatic test and internal/external examination. Review of heat treatment records.

CAREER SCAN:

Dec 2020 to Continue; with ABS Industrial Verification (India) Pvt. Ltd. Navi Mumbai. As Inspection Engineer / TPI

Project- NWIS-R, Client – ONGC, Hazira (L & T Yard), Gujrat. Jan 2020 to Nov 2020; with VCS Quality Services Pvt Ltd, Mumbai. As Inspection Engineer / TPI

Project- Cluster 8, Client – ONGC, Hazira (L & T Yard), Gujrat. Nov 2017 to Nov 2019; with Naseer S. Al Hajri Corporation, Kuwait. As Welding Engineer / Piping Inspector,

Project – NRP Al Zour, Client – TSHJ / KIPIC, Kuwait. Jul 2014 to Oct 2017; with International Certification Services Pvt Ltd, Mumbai. As Mechanical Surveyor / Inspection Engineer / TPI Project- Revamping of Rig Sagar Laxmi, Client – Pipavav Ship Yard / ONGC, Gujrat. Project- BPA BPB RC, Client – ONGC at Offshore Process platforms BPA, BLQ1, BPB, BLQ2 & belonging unmanned platforms.

Project- Vendor Inspection (in line MS pipe, PE pipe inspection, fittings, valves inspection at vendor’s location), Maintenance, fabrication & hook up jobs, Client – HPCL Refinery Mumbai, BPCL Refinery Mumbai, GGCL, GSPC, Jain Irrigation Systems Ltd., Jalgaon, Bhushan Steels Ltd. Khapoli. Nov 2013 to Jun 2014; with Mathew Associates Hook-up & Weld Services, Navi Mumbai. As Sr. QA/QC Engineer

Project- C3 / C4 Campaign, Client – BG India, at Offshore Panna Field, Mumbai. Sep 2012 to Nov 2013; with Dolphin Offshore Enterprises (I) Ltd., Navi Mumbai. As QA/QC Engineer

Project- DDW1 & PLQP, Client – LnT / GSPC, at Offshore DDW1 Platform, Kakinada. Mar 2009 to Sep 2012; with Alvi Tech Services Pvt Ltd, Mumbai. As QA/QC Engineer

Project- Heera Redevelopment, Client – Punj Lloyd Limited / ONGC, at Offshore Heera field, Mumbai. Project- Fabrication of Conductor Follower, Client – Punj Lloyd Limited / ONGC, Mumbai. Project- Fabrication of Temporary Guide Base, Client – ONGC, Mumbai. Project- Replacement of HVAC System, Client – Anchor Offshore Services (I) Pvt. Ltd. / ONGC, at offshore BPA, BPB & BLQ2 Platform.

Project- G1 GS15 DP (SHALLOW WATER), Client – Leighton Contractors India Pvt. Ltd. / ONGC, at Offshore Platform GS15 -1& GS15 -4, Kakinada.

Project- Creation of Test Metering Facilities at B#55 Project, Client – ONGC, at offshore B55 platform, Mumbai.

Project- Valve Replacement, Client – ONGC refinery, Uran. Oct 2006 to Feb 2009; with Inspection Advance Technology, Navi Mumbai. As Workshop Engineer / NDT Supervisor

Project- Maintenance & Modification of piping & Tank Fabrication, Client – ONGC, Uran. Significant Highlights:

At ABS Industrial Verification (I) Pvt. Ltd, Navi Mumbai.

Lead and supervise inspection team to carry out QA/QC activities on various projects which includes new facility expansion project and brown field retrofit project.

Review contractors ITPS, Quality plan, Execution procedures and method statement.

Ensure that contractors executing the works as per SOW and schedule and provide work guidance if required.

Assess contractor implementing the requirements of approved QCP and ITP inspection intervention points and reports are maintained.

Assess contractor’s quality control procedure implementation and recommend for further improvement.

Escalate process failure and work deficiencies as NCR and follow up to close out.

Confirm that contractor procured materials is traceable and properly stacked and preserved.

Ensure that inspection and measuring equipment and instruments are properly calibrated and maintained. At VCS Quality Services Pvt Ltd, Mumbai.

Monitor the tasks of project inspectors (TPA) involved in day-to-day inspection activities on behalf of client.

Participate / perform stage wise and final inspections of fabricated and installed structure, piping & equipment.

Ensure that any non-conformities (NCRs) identified are effectively addressed and closed.

Review / comment on the Project Quality Plan, Project Execution Plan & other project procedures / documents submitted by EPC / PMC / Contractors.

Review / approve inspection & test plans, QA / QC Procedures, method statements and monitor their implementation at site.

Review / comment on technical queries / concessions / deviations related to project. At Naseer S. Al Hajri Corporation, Kuwait.

Spearheaded the shop floor inspection and testing of fabrication of pressure vessels, Pipes, Pipelines, exchangers and storage tank, etc.

Performed the implementation of the site Quality Plan and all procedures and specification concerning the inspection of the project.

Successfully coordinated for Quality inspection matters liaising with sub-contractor management and work force.

Reviewed and ensured that appropriate consumables were distributed to welders in order to make sound weld.

Inspected dissimilar metal joining such as stainless steel to carbon steel; qualification & performance monitoring of welding personnel.

Monitored various welding process like GTAW, SMAW.

Effectively witnessed the tests such as vacuum test, measurement accuracy test UT, PT, MPI & Oil of tank bottom plate and shell.

At International Certification Services Pvt Ltd, Mumbai.

Devising and implementing company quality assurance program in compliance with company requirements.

Prioritizing quality assurance responsibilities based on the integration of new designs and products into current production schedule.

Inspecting and testing the products at various stages in the production process.

Establishing testing procedures to determine a product's dimensions and characteristics.

Performing testing on the materials, parts, finished products to measure product performance under a variety of conditions.

Leading supplier selection, assessment and ongoing monitoring initiatives.

Supporting supplier quality goals and site-wide improvement initiatives through effective identification of opportunities and execution of departmental projects and site-wide initiatives.

Ensuring the supplier base consistently achieves the company’s delivery and quality requirements.

Reviewed all types of process documentation required for fabrication, erection and commissioning, etc.

Handled painting inspections and quality control activities.

Development and implementation of inspection checklist and report/format.

Reviewed QA/QC procedures.

Surveillance inspection (Fit up, Weld Visual, Weld consumables check and Monitoring of various welding process). At Mathew Associates Hook-up & Weld Services, Navi Mumbai.

Prepared QA/QC procedures for various clients; coordinated for all destructive and non-destructive testing at various sites for different clients.

Inspected fabricated pipes & structures, welding inspection, quality control, Radiographic Film interpretations etc.

Managed alloy verification and familiarized with Approved Drawings, Governing Standards and Specification

Arranged the various Test Packages and Conduct the Inspection (Hydrotest &. pneumatic test) with clients. At Dolphin Offshore Enterprises (I) Ltd., Navi Mumbai.

Responsible for coordination of all inspection activities such as NDT, visual, dimension, material, fit up, welding and painting inspections carried out in accordance with inspection plans with relative standard level of control in order to assure that contractual requirements are met.

Initiated, recommended and assisted in providing effective solutions to such problems that may arise concerning visual inspection, magnetic particle testing, inspection, penetrant testing and ultrasonic testing inspection.

Communicated for quality inspection matters liaising with sub-contractors management and work force. At Alvi Tech Services Pvt Ltd, Mumbai.

Reviewed and accepted material receiving inspection for Plates/Pipes, Fittings, Valves, Instruments, and vendor supplied Equipments.

Instrumental in initiating, recommending and assisting in providing effective solution to problems that raised concerning visual inspection, magnetic particle testing, penetrant testing and ultrasonic testing inspection.

Ensured Quality Standard and Procedures were maintained and oversaw Radiographic interpretation.

Supervised and inspected Welding, Pre-heat and Post Weld Heat Treatment of weld.

Conducted Welder qualification test and issued certificates.

Monitored various welding process like GTAW, SMAW.

Addressed settlement checking of Tanks, line checking, mechanical and QC clearance of hydro test packages.

Performed line checking/prepare and check official test pack prior to release for hydro testing by ensuring that all welding inspection and NDT activities affecting the quality of welds contained in each piping spools of an isometric have been completed and accepted.

At Inspection Advance Technology, Navi Mumbai.

Coordinated for all destructive and non-destructive testing at various sites for different clients.

Prepared QA/QC procedures for various clients

Day to day Co-Ordination and regular inspection activities with third party and client.

Preparation of daily progress report of the project. EDUCATIONAL QUALIFICATIONS:

PASSPORT DETAILS:

Passport No. J8013025

Date of Issue: 16/07/2012

Date of Expiry: 15/07/2022

Place of Issue: Bhubaneswar, Orissa

PROFESSIONAL QUALIFICATIONS

Corrosion Management & Cathodic Protection of Pipelines & CGD Network. ASNT LEVEL II IN FOLLOWING METHODS.

Dye Penetrate Testing (DPT)

Magnetic Particle Testing (MPT)

Ultrasonic Testing (UT)

Radiographic Testing (RT)

BOSIET & HUET from NAMAC.

COMPUTER SKILL:

Operating Systems : Windows

Packages Known : MS Office (Word, Excel)

Year Institution Degree/Certificate Percentage

1996 - 97 Panchayat High School, Nalbanta, Orissa HSCE 61 2001 - 04 Nilachal Polytechnic, Bhubaneswar, Orissa Diploma in Mechanical 65 2011 - 14 RVD B Tech in Mechanical 64

PERSONAL PROFILE:

Father’s Name : Late Shree Chinta Mani Panda

Date of Birth : 1st July 1982

Enthusiastic : Hard working and self-learner

Marital Status : Married

Nationality : Indian

Languages : Oriya, Hindi, English, Bengali, Marathi DECLARATION

I hereby declare that the information above are true to the best of my knowledge and belief. Thanking you Sir,

Dwiti Krushna Panda

Contact this candidate