Calamba Equipment Engineer
Resume:
CHRISTIAN ANTHONY A. SANGELES
******************@******.***
Position: Senior Supplier Development Engineer - Global Function
Company Name: Littelfuse Philippines, Inc.
Company Address: Lima Technology Center, SEZ, Malvar, Batangas
Company Profile: Design and Manufacture of circuit protection fuses for electronic devices, automotive, industrial and power applications
Period of Employment: May 2013- Present
Department: Supply Chain / Global Quality
Detailed Duties and Responsibilities:
- Supplier Development:
Defines, develops and implements Supply base strategies that drive improvements in supplier selection, development, and leverage across customer programs for quality improvements and cost savings.
Measures the supplier performance, defines actions in case a supplier is not meeting the quality expectation and targets.
Drives zero defects and develops supplier capabilities via continuous improvement programs.
Provides insight and assistance on implementing and maintaining Process Improvement and Optimization concentrating on proactive methodologies with the supply base.
Proactively communicate information or issues that may impact the product costs or manufacturability to all affected departments. Monitors and drives PPM issues with the supply base.
- Supplier Audit / Qualification / NPD:
Provides support for NPI activities by participating in the APQP process as required.
Ensures site supplier evaluation is performed. This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells. Performance will be reported internally, to the supplier, and to the customer where applicable.
Works with Engineering (Design and Manufacturing Engineers) team to define process parameters and criteria to ensure supplier process capability is effective to meet product and process requirements. (VDA or PPAP).
- Production Support:
Ensures that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented.
Reviews supplier manufacturing processes, collaborate with suppliers on process improvement and value enhancement opportunities.
Reviews all supplier discrepancies. Coordinates and tracks the corrective/preventative action effort.
Leads SCAR - Supplier Corrective/Preventive Action process for problem resolution and continuous improvement, including critical analysis of supplier DOE, CPK, Gauge R&R studies.
-Outsource Support
Littelfuse`s representative in Silicon Assembly and Test Subcontractors and direct materials suppliers in Asia (China, Taiwan,Thailand, India and Philippines).
Trainings and Seminars:
Green Belt (Six Sigma)
Lean Manufacturing
IATF 16949
Position: Senior Quality Engineer
Company Name: ON Semiconductor Philippines Incorporated
Company Address: Lot C3-10, Barangay Punta Carmelray Industrial Park II, Special Economic Zone, Calamba, Laguna, Philippines
Company Profile: Designs and Manufactures Application Specific Semiconductor Devices for Automotive, Medical, Industrial and Commercial applications.
Period of Employment: November 2009- May 2013
Department: Back End Quality Engineering
Detailed Duties and Responsibilities:
Facilitated the MRB (Material Review Board) of wafer probe.
Designed audit checklists for product and process audit.
Supervised Wafer Probe QA inspection operators.
Conducted Internal and Service Provider Audits to support Performance to Schedule goal base on established yearly audit plan
Issued CAR to areas found to have non-conformances
Drove the implementation of corrective and preventive actions
Qualified equipment transferred to new Manufacturing Sites
Facilitated CAB review.
Audited new ON Manufacturing Site
Trainings and Seminars
VDA 6.3 Internal Auditing
QMS Auditing
Neville-Clarke Phils.
Position: Quality Engineer
Company Name: ON Semiconductor Philippines Incorporated
Company Address: Lot C3-10, Barangay Punta Carmelray Industrial Park II, Special Economic Zone, Calamba, Laguna, Philippines
Company Profile: Designs and Manufactures Application Specific Semiconductor Devices for Automotive, Medical, Industrial and Commercial applications.
Period of Employment: June 2005 – November 2009
Department: Customer Quality Engineering
Number of staff supervised: 6 Technicians
Detailed Duties and Responsibilities:
Quality representative of the Material Review Board for non-conforming materials
Ensured that containment actions requested by Wafer Fab were properly implemented in sort manufacturing sites
Scrutinized dispositions made by the MRB Team on non-conforming materials by recommending additional reliability tests and screenings to assess product quality and reliability.
Reviewed electrical verification reports created by Line Sustaining Technicians.
Assessed the training needs and competencies of CQE Technicians and recommended training programs
Supervised Technicians and schedules manpower support to production.
Special Assignments/Projects Handled and Implemented
Initiated the Neighborhood Analysis Program with the help of engineering representatives from wafer fabrication sites.
Consolidated and standardized the procedure on non-conforming materials from various sites.
Trainings and Seminars
Failure Analysis
AMIS-P
6 month training program from Nov ’07 to May ‘08
Perform X-Ray, CSAM, High Magnification Inspection, Bench Test, Deprocessing / Delayering of parts submitted for analysis.
Training Course for Advanced QMS Auditor
Mandarin Hotel
20-21 July 2006
Basic Lean Six Sigma Training
Advanced Research and Competency Development Institute, Alabang Muntinlupa
Quality Representative Orientation
Advanced Research and Competency Development Institute, Alabang Muntinlupa
7 and 11 July 2006
Digital Test Technology
AMIS-P Calamba Plant
23-27 October 2006
Position: Final Test Process Engineer
Company Name: AMI Semiconductor Philippines Incorporated
Company Address: Lot C3-10, Barangay Punta Carmelray Industrial Park II, Special Economic Zone, Calamba, Laguna, Philippines
Company Profile: Designs and Manufactures Application Specific Semiconductor Devices for Automotive, Medical, Industrial and Commercial applications.
Period of Employment: May 2002 – June 2005
Department: Process and Equipment Engineering
Number of staff supervised: 12 Technicians
Detailed Duties and Responsibilities:
Final Test setup troubleshooting, repairing and proposing mechanical design improvements to help improve electrical and mechanical yield of production lots.
Improved and modified existing processes as a result of evaluation and studies.
Created training modules and performed skills assessments of Technicians
Monitored the availability of spare parts used for setup.
Special Assignments/Projects Handled and Implemented
Established an extended testing facility in subcontractor which zeroed out delinquencies and generated US $ 10.8 M additional revenue.
Kaizen Awardee for the project on “Optimization of Compressed Dry Air Usage” which helped reduce CDA consumption.
Implemented procedures, techniques on how to conserve usage of Liquid Nitrogen.
Trainings and Seminars
Seminar on Pneumatic Control Technology
AMIS-P, Sucat Paranaque City
5 February 2004
AMIS-P, Sucat Paranaque City
15-16 July 2004
Failure Mode and Effects Analysis (FMEA) Training
AMIS-P, Sucat Paranaque City
1 September 2004
Basic Statistical Process Control
AMIS-P, Sucat Paranaque City
4 and 11 April 2003
MT9510 Handler Maintenance Training
AMIS-P, Sucat Paranaque City
25 June 2003 and 11 July 2003
Failure Mode and Effect Analysis Training
AMIS-P, Sucat Paranaque City
18 and 28 June 2002 / 19 July 2002
Basic Supervisory Training
AMIS-P, Sucat Paranaque City
25 July 2002
Measurement Systems Analysis
AMIS-P, Sucat Paranaque City
20 and 27 July 2002
J750 Test System Programming
AMIS-P, Sucat Paranaque City
15, 16, 23 26 and 27 August 2002
8D Problem Solving
AMIS-P, Sucat Paranaque City
17 September 2002 and 3 October 2002
Position: Test Equipment Engineer
Company Name: Maxim Philippines Operating Corporation
Company Address: Gateway Business Park Cavite
Company Profile: Designs and Manufactures Semiconductor Devices
Period of Employment: May 2001 – May 2002
Department: Equipment (Handler) Engineering
Number of staff supervised: 12 Technicians
Detailed Duties and Responsibilities:
Supervision of Maintenance technicians supporting all equipment related issues.
Monitoring of Equipment downtime and identification of improvement areas.
Improvement of site utilization of test systems.
Setup verification and hardware repair
Special Assignments/Projects Handled and Implemented
Supported the transfer of equipment from subcontractors.
Company Name: Dallas Semiconductor Philippines, Incorporated
Company Address: Science Park Cabuyao Laguna
Company Profile: Designs and Manufactures Semiconductor Devices
Position: Test Equipment Engineer
Period of Employment: October 1999 – April 2001
Department: Test, Product and Equipment Engineering
Detailed Duties and Responsibilities:
Maintenance support on tester systems and handlers.
Qualification of new devices for test including needed hardware and peripherals
Support to critical setups.
Overall procurement of test systems and handler spares.
Educational Attainment:
Masteral Program : Letran, Calamba
Degree : Master in Science Major in Engineering Management
Inclusive Dates : June 2010 – March 2012
College : Polytechnic University of the Philippines
Degree : Bachelor of Science in Electronics and Communications Engineering
Inclusive Dates : 1994 to 1999
Contact this candidate