CURRICULUM VITAE
GHUMRA ASIF
Deptt.Of QA/QC Management.
Experience in Oil &Gas and Petrochemical project
Mob No:-+91-816*******,942-***-****
EmaiID:- admyrz@r.postjobfree.com
POST APPLYING FOR:INSPECTION ENGINEER
CAREER OBJECTIVE
I would cherish to serve the organization with the7 years of experience of QC inspector in utilitizing the skills and competencies acquired which makes effective use inOil&Gas and Petrochemical and like to work in an environment where performance is rewarded with new responsibilities.
TECHNICAL EXPERTISE
American Society for Non-destructive Testing(ASNT)-Level II
Liquid Penetrant Testing(LPT)
Magnetic Partical Test(MPT)
Radiography Test (RT)
Ultrasonic Test(UT)
PROFILE SUMMARY
Fit-up inspection of joints.
Dimensions Check, alignment check of Joints.
Preparation of welding process, welding technique, welding qualification, welding inspection As per ASME SEC IX,ITP,Specification,QCP,WPS.
Inspection as per ASME B31.3 And ASME B31.4 In plant and cross country pipeline.
Material inspection as per ASME SEC II
Inspection of refinery pipeline system.
Pipeline internal inspection.
Coordination with NDT team at site and inspection as per ASME Section V.
Conversant with welding process such as GTAW,SMAW,GMAW,SAW,etc.
Conversant with welding materials of various grades and type as P1 To P15Eetc.
Witness of pwht,pre-heat, post-heat as per ASME B31.3,and specification.
Coordinating for the preparation of project specific Procedures, Work Instructions and Quality Plans as required and issue as per the contractor Quality System Procedures.
Coordinating with Management representative for Internal Quality Audits, Quality System and follow-up audits.
Pre-commissioning and commissioning activities.
Working as shutdown engineer in fabrication,static equipment and piping,etc.
Knowledge of pipe, pumps, Heater, valves, heat-exchanger, pressure vessel, etc.
Knowledge of Code / Standards:ASME SEC V,ASME SEC VIII DIV.I 21. API 510, API 570, API 650, API 653.
RELEVENT COURSES
Computer Fundamentals(only basics), Internet & MS Word
Training in AUTOCAD & PRO-E.
PROFESSIONAL EXPERIENCE
CURRENT :-
Company: Larsen and toubro mfg. Complex,HAZIRA,SURAT
Position. : QC Inspector
Duration. : 4th Nov to till
Project: ARAMCO, HSBH64/67 DECK, HAZIRA,SURAT
Company: CR Asia Ind pvt ltd.
Position. : Inspection Engineer(For shutdown also)
Duration. : 14th June to till
Project: DTA reliance Industries Ltd . Jamnagar, Gujarat
Company: THERMAX ENGINEERING CONSTRUCTION
Position. : Inspection Engineer shutdown
Duration. : Jan 1st2019 to 10th June
Project: DTA Reliance Industries Ltd Jamnagar, Gujarat
Company: Reliance industries Ltd,
Position. : QMD Site Engineer(For shutdown also)
Duration. : November 29th2016 to Dec 31st 2018
Project: J3 Refinery off Gas Cracker Plant. Jamnagar, Gujarat
SCOPE OF WORK :-
Here engaged in AG and UG piping erection & fabrication
Knowledge of Material CS, NACE, LTCS, SS(304,316,321,347), ALLOY (P5,P11,P22,P9,P91)
Work as per ITP,WPS, ASME both site and fabrication shop and pipeline.
Site Inspection and Fabrication shop as per approved Quality Management System (QMS)
Inspecting of weld visual of fabricated pipe spools, RT film interpretation, Material identification as per mat code, Heat number, TC and color code such as IBR, NACE, LTCS etc. as per spec. requirement., Routine Hydrostatic Tests, Pneumatic Tests and final dispatch activity as per piping requirement of Line class in Pipe Fabrication shop and pipeline.
Witness of pre-heat, post-heating and pwht as per ASME B31.1 and Specification.
Representing Project QC & attending daily & weekly meeting and set strategy for achieving milestone
Incoming inspection of raw material, welding consumables and preparation of inspection report including overage, shortage and damage
Monitoring electrode baking and holding cycle and review of welding consumable log book and consumable batch certificate
Verification of test certificates of consumables and raw material and calibration certificates for equipment’s and measuring instruments
Co- ordination of piping equipment fabrication, installation activity, inspection on marking fit-up and dimensions
Monitoring Production weld before, during and after welding as per approved WPS,ASME, ITP and Specification of RIL.
Monitoring welder performance & analysis on repair and remedies
Visual examination of welds pipe and refinery pipeline.
Interpretation of Radiography, Identification of defects and remedial action, review of NDE reports
Preparing & Maintaining QC Documentation as per Project Quality Requirement
Preparation of test package & get clearance from client for Pressure test
Co-ordination and Witness of Hydro test Activity
Interface with construction team as well as coordination with company for issues pertaining to QC/Mechanical Completion and report to the QA/QC Manage.
PREVIOUS :-
Company: Chatterjee engineering pvt Ltd.
Client: RelianceIndustriesLtd, Jamnagar
Position: QA/QCSiteEngineer(for shutdown also)
Duration: April6th2016toNovember 28th2016
Company: Larsen & Toubro Limited (Hydrocarbon Engineering)
Client: Reliance Industries Ltd, Jamnagar
Position: QA/QC Site Engineer
Duration: May5th 2015 to April3rd 2016
Project: J3 Refinery off Gas Cracker Plant, Jamnagar, Gujarat
Company : ADAMO PLANNERS AND DEVLOPERS PVT LTD
Position : QA/QC Site Engineer
Duration : From 1st November 2014 to 4thMay
Project : J3 Refinery off Gas Cracker Plant, Jamnagar, Gujarat
ROLE
Inspection of joints fit up, alignment and dimensional accuracy as per drawing requirements
Offering of NDT Test involves to Inspection
Review of NDT Test Report with Client
To ensure related activities are carried out in accordance with project specification
Preparation of welding inspection summary
Maintaining welding inspection/NDT reports and record tracking
Preparation of welding inspection summary
Witness of pre-heat, post-heat, pwht as per ASME B31.3 and Specification.
Follow up with the site engineers and supervisor in their respective areas and preparation of Management Information Report and cost control report
Preparation of daily and weekly progress report
Technical support to client and collogue.
ACADEMIC QUALIFICATION
Bachelor of Engineering
Discipline: Mechanical Engineering
RTU Kota University. 60.36 %
EXPERIENTIAL LEARNING
Company Name :-Reliance Industries Limited
Plant Name :-Coker (DTA)
Duration :-2 Month’s
PERSONAL DOSSIER
Father’s Name : GHUMRA IQBAL
Address :Plot 152C,Banglavadi,Inside-Silver Society,Jamnagar,Gujarat(361005)
Date of Birth : 25th August 1990
Marital Status : Unmarried
Sex : Male
Religion : Islam
Nationality : Indian
Skype Id : ghumra asif
Passport No. : M2206568
Date of issue : 17/09/2014
Date of expiry : 16/09/2024
Languages Known : Gujarati, English, and Hindi & Urdu
Strength : Self Confidence, Positive Attitude.
DECLARATION
I hereby declare that the above mentioned information is correct up to best of my knowledge
And I bear the responsibility for the correctness of the above mentioned particulars.
Place:
Date: GHUMRA ASIF