Curriculum vitae

Name : Hasan Basri

Passport valid Until : 08-06-2025

Date of Birth : 09-11-1977

Merital Status : Merried (M3)

Religion : Moslem

Rass : Asia ( Southeast Asia)

Email Address : admw38@r.postjobfree.com; admw38@r.postjobfree.com Phone Number : +62-813******** ; +62-812********.

Home Address 1 : Tuban Akbar,Merpati street G-56 Tuban,East java,Indonesia Home Address 2 : Santrn Kuripan,Jumenng,Mojoanyar,Mojokrto,East java,Ind Esia (Direction point)

Education : Shipbuilding goverment polytechnic (D4) Institute sepuluh november Surabaya of Technology

(Electrical and instrumentation Engineering)

Languages : Indonesian,English

Nationality : Indonesia.

Point of Origin : Juanda international Surabaya airport,east java,Indones Skill Summary :

1.Calibration Engineer in Instrumentation with many brand and model of equipment

Transmitter of Flow,Temp,Diff,Press,Level(Yokogawa,Rosemount,Foxborro,Smart etc) pneumatic and Hydraulic sysrems.

Control Valve with Smart and non smart Positioner (Masoneilan,Fisher,Neles jemsburry,Valtex,Flowserve,Emerson Fisher and others all instrument type with oversea product and Indonesian Indonesian product etc)

Tankage level monitoring automatic (Tank gauging monitoring ) and Manual : ATG,Level measure tape,Radar etc.

Vibration monitoring systems : Verification of probe sensore and calibration,Probe tranducer,Bentl y nevada 5000 & 3500 series.

Familiar with personal & Common maintenanance tools set & function tools and test.

Expert in Pneumatic and Hydraulic for all applications and control mode systems.

Familiar and strong for Instrumentation Construction,Modification base of function and reliability.

Familiar and strong FAT,SAT and installation manageable on site.

Familiar with WHCP control,Modification and testing.

Etc.

Electrical Calibration and Electrical test:

Familiar with Breaker type and Load test :

Winding Motor test.

Solo Run test and Load test.

Vibration test during performance and live production test.

Phase test (R,S,T)

Familiar with Electrical Personal and Common Maintenance tool sset & test.

Familiar and strong for electrical construction,Pulling cable,Wiring,Insulation test,Precommissioning and Commissioning Test.

Familiar and strong FAT,SAT and installation manageable on site.

Etc.

2.Experience with Various Position and level of organization in Company with technical and non technical of scope of daily work (Ever) :

Pre-Commissioning and Commissioning Superintendent

Electrical and Instrument Pre-Commissioning and Commissioning Coordinator.

Electrical and Instrumentation Engineer.

Electrical and Instrumentation Manager.

Instrument supervisor.

3.Leader Ship in scope of level position on company :

Manage Work flow day by day on site and reporting to hierarchy continuously as verbal and Writing.

Meeting progress on internal teams and Corporate level,With contractor in office scheduled and

Non scheduled.

Update and information to organisation to accommodate and sharing information to understanding of Personal worker to carried out work based on schedule of project and

maintenance activity.

Communicate and Coordination in internal teams and with others department involve and with Contractor & sub contractor if necessary.

Effective and Trouble solver with technical and non technical during duty and back up during non duty.

Make good joining with all of personal in work place to give more work value and easy understanding.

4.Literate skill and Documentation :

Microsoft office Word,Excel,Power point.

AutoCAD

Make Procedures for Pre-Commissioning, Commissioning (Electrical, Instrumentation and piping).

Procedures for maintenance and involve to project.

Manage and monitoring Tools and equipment re certification for support dail y maintenance

work and Pre-Commissioning & Commissioning work. 5.Certification and skill :

DCS Delta v Control systems.

PLC 5

PLC AB

Siemens S700

T-BOSIET

H2S

Instrumentation Advance training.

Quality Control Circle

Safety training observation programs

Behaviour safety for line supervisor

6.Electrical and Instrumentation skill summary.

Manage Teams and providing Tools and equipment for daily work on site.

Manage on monitoring work for pulling cable wiring, Insulation Test, interconnection on field side based on function of equipment refer on vendor and project document.

Manage Pulling, Wiring in Rack Control Room (CCR) Interconnection to DCS Rack, Turbine marshalling, Compressor marshalling.

Interconnection to Power distribution panels, MCC Rooms, Switchgear panel based on engineering Drawing.

Capable for Electrical and Instrument design and estimator based on tender.

Familiar with construction work, Maintenance work, Pre-Commissioning and Commissioning

work, in each place of project must follow Construction.

Familiar in Maintenance work, Preparation, Procurement of spare part, Reliability and durability & observation on site plant.

Follow PSSR during Construction ready for start up (Provided RFC,RFSU if needed)

Familiar with PMC work and responsibility.

Familiar With FAT,SAT and Turn Around work and schedule (WHCP, Turbine F&G, Control valve Analyzer.etc)

Familiar with construction, monitoring and Installation of Turbine,Boiler,IA Package,WHCP,F&G on site.

Familiar with Construction and Pre-Commissioning & Commissioning on onshore, Offshore (Oil

& Gas include on well platform production) and Petrochemical plant with different character, safety type and level.

Familiar in GTS Work, Remote Well and single remote well work over, New Installation, Modification on site.

Experience on Power plant work, Modification and new installation on site with coal fired type.

Follow training as schedule and no schedule yearly Experience Summary

OIL AND GAS ONSHORE & OFFSHORE WORK.

Manage Teams,Manpower and Equipmnt required during projct,PreCommissioning and Commissioning

Development procedures for preCommissioning and Commissioning.

Do PreCommissioning and Commissioning for Electrical,Instrumentation and piping.

Capable to manage work during construction for electrical,Instrumentation on site.

Manage Preparation and work to platform side(include swam water and deep water)

Preparation work during Rig will insert to new well and after move of Rig work.

Coordination with company man during on platform activity.

Familiar with Well Head Control Panel (WHCP) in Green field project and Brown field project.

Familiar with PMC work and responsibility ( Client representative)

FAT,SAT & Punchlist work .

Familiar with electrical construction,switchgear,pulling cable,testing equipment during project.

Fmiliar with Construction and maintenance Instrumentation for documentation,Engineering.

Manage man power for Pulling cable,Wiring,Insulation Test,PreCommissioning.Loop test Each point include setting and alarm set,Commissioning,PSSR and start up plant

Calibration,witnessing,Function test of equipment for all kind and brand of instrumentation on shop and site plant.

Manage and trouble solver if any condition on ste

Communication,Coordination,Discussion during running work on site plant.

Follow HSE rule and safety Work target on site and implementation of potential and risk of act on site plant.

Follow HSE Site survey to contractor to makesure all kind of work save and good productivity.

Make all teams keep spirit and interest during on work for prevent wrong act on site plant or during duty.

Follow training include equipment package of project and regular training by Company rule.

Manage and Monitoring Work eastimation during Construction and PreCommissioning and Commisioning prevent over day of projct schedule.

Familiar with turbine installation,Assist alignment,Construction for Electrical and instrumentation

Familiar with onshore and offshore rule of work,standard and level of concern on site.

Manage and monitoring of tools and equipment certivication yearly.

Familiar with P&ID,Isometric,PFD,FEED Drawing and Engineering data.

Familiar as site engineer activity on site plant

Makesure and reporting during waranty period of project. PETROCHEMICAL PLANT WORK.

Involve during company have project to finishing or additional or modification plant during maximising of production on site.

Witnessing contractor for installation of instrumentation,Electrical equipment shall be follow service of production and specification.

Checking drawing,Markup and function check during running project and before start up plant.

Monitoring and assit vendor during install CTG,GTG,STG on plant for makesure and preparation during maintenance.

Construction for Electrical,Motorizing control systems,testing,switchgear test,Distribution power,Solo Run,Actual run and etc.

Involve to others plant likely Water treatment,utility plant,Process plant,Flaring and Tankage plant in instrumentation and Fire & Gas side.

Manage and Monitoring for Puling cable,Wiring,Insulation test,Loop test,PreCommissioning and Commissioning on site.

Understanding for process work flow and systems for easy more during maintenance.

Improvement equipment during often trouble on running plant.

Makesure and Communiacation with vendor of equipment and systems installed overall of plant for avalability and material status on obsolate / discontinue or still continue.

Familiar with PMC work and responsibility.

FAT,SAT during new equipment will installed on site.

Familiar wirh tight of schedule during running construction and PreCommissioning and Commissioning.

Manage and monitoring of tools and equipment certivication yearly.

Familiar with P&ID,Isometric,PFD,FEED Drawing and Engineering data.

Familiar as site engineer activity on site plant. MAITENANCE ACTIVITY.

Manage and monitoring teams for daily work PM,CM and TA activity on site.

Check each sparepaert and maksure availability for Maintenace in 1 years and Preparation material for TA activity.

Check result and documentation on daily work.

Improvement and upgrade of material during often trouble on running production plant.

Reliablity and Correction action to makesure part and plant can work to support productivity.

Manage and implementation cost of maintenanace and reporting monthly and yearly to provide all material needed and cost efectivity.

Improvement personal for special training based on upgrade plant and equipment or upgrade level of personal skill regulary.

Give support and confidence for each personal during on duty.

Give appreciate and special souvenir to make more respect to each personal with company programs. WORK EXPERIENCE (from current to oldest)

Company Namell

PT.GEARINDO PRAKARSA

Electrical and Instrument

Engineer

Dates of Employment:

March 2021 – Present

Rig Name, Type & Design

Oil and Gas Production platform

shallow and deep water

Client

Pertamina EP asset 3

Country of Assignment

indonesia

Details of Job Desc :

Responsibility :

Make sure implementation of project targeted implemented oon site.

Review and monitoring for installation and testing equipment on site.

Manage teams for pulling cable,Wiring,Insulation test on site.

Modification drawing if necessary.

Manage documentation for Pre Commissioning, Commissioning and start up.

Manage teams for calibration, Function test, Logic test and all setting parameter for electrical and instrumentation.

Review and understanding for each equipment for control process needed.

Collaborate with others department during work implementation on site.

Strong and high interest for all work for Electrical and instrumentation.

Familiar and strong work in pneumatic and hydraulic.

Familiar work as per PMC work and responsibility.

Conduct for Cconstruction work for Electrical and instrument in well and Process platform,Distribution line (Pipe lines and accessories on site).

Familiar with safety rule and safety attention during work on site.

Keen for Electrical and instrument drawing,Design review and over all process requirement.

Ready and interesting for all kind of work based on scope of work. Company Namell

PT.MEINDO ELEANG INDAH

Position Held

Construction

,PreCommissioning and

Commisioning

Superintendent

(Include Electrical,Instrument

and Piping)

Dates of Employment:

April 2020 – Jan 2021

Rig Name, Type & Design

Oil and Gas Production platform

shallow and deep water

Client

Pertamina Hulu mahakam

Country of Assignment

indonesia

Details of Job Desc :

Responsibility :

Develope procedure for Pre commissionning and Commissionng work include Piping,Eelectrical and Instrument scope and implemented of project.

Pre Commissioning and Commisioning Leak test,MOP Test,Integrity system of piping connection before Achievement Of Commissioning Certificate (AOCC).

Development for Pre Commissioning and Commisioning supported with ICAPS and OPERCOMM software to easy and traceble report during Pre Commissioning and Commissioning directly.

Include modification engineering, Design and application on site

Survey for Construction work, Likely Piping set up and Construction.

Review for FEED drawing and Study of equipment project for applicated on site.

Development Pre Commissioning and Commisioning for Electrical and Instruemnt based on sope of projct.

Develope and control teams,Equipment,Tools and special tools for full support precommissioning and Commissioning.

Control and follow up all PO during construction phase.

Ensure safety processes and procedures are identified, implemented and followed. This position is responsible for site E&I workforce resource management.

Establish tactical and strategic goals, objectives, policies and procedures in assigned area within the business. Set priorities to allocate resources among various operational or maintenance divisions to meet competing customer needs.

Coordinate and oversee multiple superintendents scope and management and Sub Contractors participating in major projects and/or routine and non-routine jobs requiring with safety awareness and focus, as well as direct to supervisors and other staff in daily operations.

Provide oversight to assure effective crew job planning, task efficiency & productivity and assure frontline supervisors and workforce training programs are being conducted and are effective.

Ensure that the Electrical and Instrument workforce and assigned subcontractors function as a team and ensure that all applicable with work plans, quality processes,documentation and procedures are implemented and completed.

Inspect daily operations and projects in progress and upon completion to ensure quality of work. Provide administrative and technical direction to staff; interpret policies and procedures established by regulatory agencies.

Develop,plan, and coordinate the work plan for assigned projects and responsibilities, which may include project management, cost estimates and program development. Coordinate work with other units and site departments.

Participate on company-wide project teams.

Perform other duties as required like prepare document work for others project at same time running project.

Testing,FAT,SAT equipment before installed at filed site

To carry out work in compliance with client values and policies, relevant laws and regulations.

priorities and objectives, PHM standards and procedures and good industry practices,

Review and monitor the availability of drawings, specifications, job instructions, material deliveries and tools

Motivates other for to reach target as schedule affectively.

Responsible for daily monitoring pre-commissioning progress and report to Pre comm/ Comm Manager.

Review contractors construction schedules to ensure they include all required activities as realistic timelines,

logical sequencing, adequate resources to allow for pre-com. activities

Ensure Contractors personnel have sufficient training and experience to carry out safe operations

Identification and follow-up of any Non Conformance linked to Pre-com. in close relation with Construction and QA/QC

Coordinate with Commissioning Team during pre-commissioning phase in close relation with other department.

Manage,Monitoring for installation new WHP and Modification existing to accomodate new eqipment added at project.

Communication with Operation,Maintenance during tie in and Pre comm/Comm.

Effectively and carefully motvation to tems during execution of work at site especially at online existing plant/platform.

Manage and review document and specials tools vendor,Profesional worker skill before execution special work like hot tapping at existing plant.

Development engineering data for support project on site plant during construction still runing on site.

Verification engineering data related malfucntion system during Pre-Commissioning and Commisioning work and test.

Review material purchased for support work on site.

Coordination and colaboration with others department during work on site directly or with indirectly.

Meeting routine with Client or with Sub Contractor for update situation of work flow management implementation for stabilize target of work day by day and speed up of work if any condition.

Makesure work installation for piping at site,Electrical and instrumentation based on Engineering drawing for ensure all item will be Conduct pre Commissioning and Commissioning have not trouble during testing.

Loop test,Insulation test,Signal test from field devices to DCS operator for Electrical and Instrumentation.

Trouble solver and easy then effective during lead of coordinate and work implementation at site.

Strong on technically and respect to each others during handle work and familiar with Electrical Construction and Instruemntation Construction and testing.

Deep Tchnical analysis for feasibility Study before run project for discussion and technical anaysis during maintenance for electrical and instrumentation equipment.

Risk analysis during running process based on equipment to be considered to makesure reliability of general plant.

Familiar with P&ID,Isometric,PFD and standard to support all work during project.

Manage progress for Piping work incude fabrication at workshop,patform site.

Makesure all parameter during fabrication and testing incude manpower and toos

Inspection on real progress for preparation for precommissioning and commissioning.

Preparation for documentation of hand over dossier for Ready to start up pant after Precommissioning and Commissioning compete.

Check material fabricated with design of pant required

Assist Commissioning manager to prepare of competion report hand over to cient representative.

Cose communication to vendor to provided special material ASAP during waranty period of necessery.

Ensure proper coordination between fabrication/installation and pre-fabrication piping activities.

Ensure proper coordination with sub-contractors involved in the assembly stages.

Ensures compliance with safety procedures and quality standards in close relation with the HSE and QA/QC Superintendents.

Searches for the most efficient technical solutions.

Collect quantitative data from its Supervisors for producing the progress reports.

Coordination and coaborate with others entity to makesure all work under control and standarization design.

If finded difference cassification and design sha be dicussed with entity authorized. Company Name

PT CHANDRA ASRI

PETROCHEMICAL Tbk.

Position Held

PreCommissioning and

Commissioning

Coordinator

(Include Electrical and

Instrumentation)

Dates of Employment:

Jul 2018-Apr 2020

Rig Name, Type & Design

Petrochemical plant

Client

Client /Chandra asri

Petrochemical Tbk.

Country of Assignment

Indonesia

Details of Job Desc :

Daily work Responsibility:

Manage of instrumentation and Electrical Construction filed site and marshalling panel at Central Control Room (CCR).

Coordinate for all actifities during preparation at Workshop,Internal check and internal test before installation at site and minimizing error during final Construction.

FAT and SAT instrument equipment during project running.

Guide amd manage Inspection, Calibration test procedure for each equipment as per ISO 9001 Standard.

Manage worker during implementation job on filed base on each scope of work and collect all progress day by day before reported on hierarchy.

Give solution and information during running work for minimize lost time and lost energy.

Interactive communication and advice all work planning and implementation field gradually.

Advise and review skill and work system during job excution base on safety rule and ecessery equipment needed on field site.

As build drawing and administration completely during running project and after project finish for hand over document based on actual installation, position and operation of equipment.

Preparation and scheduling work during Shutdown plant for effectively time and correction target of progress during shutdown for minimized work before Re-start up plant.

Coordinate all contractor during project for maximize progress.

Give solution for many trouble shooting during project and maintain project on RUN plant with save and safety rule.

Coordinate with production teams for do work during running plant.

Guide, weekly and monthly meeting progress for make sure all progress on the plant with contractor.

Hand over all status of project to production after all project finish and clear from about punchiest item.

Make sure and maintain all HEAT REVAMPING PROJCT and CREAKER PLANT UNIT as per Company schedule and reliability during start up plant.

Hook up all variant job likely Tubing impulse line installation, Modification on existing plant and function test and commissioning test on new plant and existing plant.

Hook up all cable wiring destination and variant modification for accommodate instrumentation control and system.

Hook up for pulling cable, dressing cable,panel arrangement wiring and include continuity test, Insulation test, Loop test and commissioning test.

Manage and Monitoring installation electrical control equipment,Wiring diagram and panel distribution on site based drawing.

Load test breaker,solo run Motor and motor load test during commissioning.

Test winding,elighment motor and shaft on site.

Installation and wiring connection for lighting and panel.

Monitor and install distribution panel at MCC.

Review engineering design,FEED Doc for electrical and isnstrumentation for project.

Include on Bidding,Fisibility of study before priject inline.

Precommissioning and Commissioning for electrical and instrumentation from site to Control room.

Create Instrument and Electrical drawing and wiring during Project runing or Revesion drawing based on fuction test actually.

Makesure power distribution as per field site actually.

Familiar to be PMC for Client representatove and responsibility during runnig Project.

Familiar with P&ID,Isometric,PFD and standard to support all work during project.

Familiar with Electrical Construction,Electronic and Instruementation construction with all testing parameters.

Repair tools, Equipment for testing and support Production teams.

Familiar with tight work and urgency work level.

Cooperation and Communication with others department day by day and urgency case on site.

Check and make technical data if necessery to acomodate all part for support plant reliability to ensure all equipment project can work with high durability inline on plant. Company Name

Pertamina Asset 3 Cirebon

Position Held

Electrical and Instrument

Engineer

Dates of Employment:

Ju 2017 – Jun 2018

Rig Name, Type & Design

Ofshore production platform and

deep water

Client

Pertamina Assest 3 Cirebon

Country of Assignment

Indonesia

Details of Job Desc :

Responsibility:

Installation electrical and instrumentation and in charge supervising for depurator tank on X-Ray jatibarang field.

Review design based on project implementation.

Experience and familiar with PMC work and responsibility.

Installation at FPSO facilities for Electrical and Instrumentation Construction,Precomm/Comm at X-ray Project.

Understanding for activity and work WITH Manageble personil at FPSO Plant.

Familiar with P&ID,Isometric,PFD and standard to support all work during project.

Survey and pointment equipment before installation electrical and instrument equipment.

Protection Panel installation based on control and protection system installation on switchgear area.

Pre commissioning and commissioning after installation then start up and find tuning plant during guaranty of project.

FAT and SAT applying during running project.

Monitor turbine from OPPRA during guaranty time after project.

Make sure sequence and logic of turbine base on original document and try running turbine base on synchronizing of many turbines as per schedule time.

As build drawing after project completion and hand over to production teams.

Monitoring for installation metering fuel gas production system and transfer system for monitoring actual using gas for gas turbine combustion.

Modification instrumentation for gas distribution base on SIL and safety plant system.

Advise maintenance during Optimation and durability for gas distribution.

Monitoring calculation on monitor and pro active maintenance for each equipment during transfer gas from site to turbine.

Solo run test or no load test to each motor and load test motor before commissioning.

Correction and inspection during electrical equipment during project as per spec document and acual.

Familiar to be PMC for Client representatove and responsibility during runnig Project.

Familiar Construction of electrical and instruementation with all testing parameters

Familiar with P&ID,Isometric,PFD and standard to support all work during project.

Manage and monitor for Switch gear installation,wiring,Pre comissioning and Commissioning.

Test all step of logic and start up.

Reporting day by day during Project to hierarchy.

Familiar to be PMC for Client representatove and responsibility during runnig Project.

Familiar with P&ID,Isometric,PFD and standard to support all work during project.

Familiar with Electrical Construction,Electronic and Instruementation construction with all testing parameters.

Handle hydropower package (Turbine and Generator ) for hook up installation,Wiring,Insulation testingt,Hi holtage test,PreCommissioning and Commisioning,PSSR then start up plant or star up package.

During installation,Check all part position,standard,FAT,SAT if necessery.

Cooedinate with cliet during running project to ensure everything for smoothly all work based on duration and schedule project.

Estimation work and ensure all parameter on site inline on schedule.

Coordination and Meteeing strategic if necessery.

Good communication and cooperation with all entity and personal to support work normally of project.

Handle hydro power package on site include Turbine and generator.

Handling and manage hook up installation for electrical,Instrumentation and Mechanical for makesure everything work can running normally based on inle schedule on site.

Manage preparation personal and tools for work execution on site.

Follow work procedure,Permit and safety role to makesure all work can running normally without accident.

Estimation and acessement during running project to eliminate trouble on site.

Discussion and meeting if necessery.

Montoring during piping fabrication on site and workshop to ensure a work can running based on schedue in ine.

Monitoring perform testing in the workshop based on stanadard.

Manage and control manpower dring running project. Company Name

PT JAYA INDO MULYA

ABADI.

Position Held

Electrical and Instruemnt

Engineering Manager

Dates of Employment:

Jan 2017 – Jun 2017

Rig Name, Type & Design

Power plant

Client

PT.Jaya Indo Mulya Abadi.

Country of Assignment

Indonesia

Details of Job Desc :

Summary Job desc:

Estimator project,Tender and calculation modification project.

Cosultant electrical and istrumentation to Pembangkit Listrik Jawa Bali (PJB) Area tanjung awar awar jenu Tuban.

Provided wiring system to can applicated on plant.

Accommodate spec material by user for small project.

Modification and development equipment during running process

Coordinated all man power during start project, Monitoring progress to propose project on time.

Handle issues on filed for clear and solution condition on field.

Active communication with owner during project and to find best solution.

Modification and restore truss track for normally used operation clean up waste on water intake on power plant.

Build and re-wiring arrangement equipment then reprogramming that truss track

Mmonitor and check during warranty time after commissioning truss track on field

Develope all project design based on requirement.

Handle cal fired package and maintenance.

Maintenance all of instrumentation system on filed devices and Control system.

Monitoring and maintain equipment can working properly.

Stabilize,Improvement and develop reliability of plant during running plant. Responsibility:

Modification conveyor system to accommodate easy iidentifies trouble on operational of coal conveyor.

Motorizing control and system,Testing and performing monitor.

Build and performance for Switch gear,PDB and transmition until field devices

Provide and install instrumentation on existing plant.

Understanding and installation motorized, wiring, calculation to application on field.

Check and identify and trouble shooting for camera CCTV all plant area.

Modification drains line on existing plant.

Estimator and budgeting project base on spec and offering by user.

Monitor and input respon during excute project on field.

Estimate day job and progress and reported to hierarchy.

Manage teams and schedule during Runing project.

Reporting and documentation day by day as per working schedule.

As build drawing as per actual project

Contact this candidate