CHRISTOPHER E. JOHNSON

Phone: 316-***-**** Email: admuxm@r.postjobfree.com

SUMMARY

Self-motivated Mechanic determined to produce top quality parts with precision and keen attention to detail.

PROFESSIONAL EXPERIENCE

Structure Sheet Metal Mechanic, July 2020 - Present

Bombardier Aerostructures

Inspected manufactured products and manufacturing processes to ensure compliance with customer specifications and purchase order requirements.

Inspected vendor supplied products to ensure compliance with contract requirements.

Assisted other employees in the performance of their job assignments through coaching, mentoring, and guidance.

Accepted, rejected, or reworked defective or out of conformance assemblies.

Read and verified conformance with customer supplied engineering drawings and specifications.

Communicated defect details in an effective manner to appropriate parties.

Monitored and verified quality in accordance with statistical process or other control procedures.

Sealed & MVP Certified / Flat Peen Certified / OSHA Certified.

Drilled close tolerance holes. Installed high lock rivets.

Completed all required paperwork in connection with assigned normal duties, document time and work completed in appropriate systems, and create any required documentation.

Expert at using Rivets Guns, Bucking Bars, C-Squeeze Drills, 90 Degree / Straight Grinders.

Trimmed, Drilled, Reamed, Countersunk, Grinded, and Finished parts to specifications, used templates, hand tools, and pneumatic tools

Perform disassembly, cleaning, inspection, repair, fabrication, manufacturing, maintenance, and assembly of aircraft and aircraft parts, components and wiring. Documenting work per company, customer and regulatory requirements.

Sheet Metal Assembly Mechanic Process C-M01C,

Spirit AeroSystems Oct 2019 – Mar 2020

Inspected manufactured products and manufacturing processes to ensure compliance with customer specifications and purchase order requirements.

Inspected vendor supplied products to ensure compliance with contract requirements.

Assisted other employees in the performance of their job assignments through coaching, mentoring, and guidance.

Accepted, rejected, or reworked defective or out of conformance assemblies.

Read and verified conformance with customer supplied engineering drawings and specifications.

Communicated defect details in an effective manner to appropriate parties.

Monitored and verified quality in accordance with statistical process or other control procedures.

Sealed & MVP Certified / Flat Peen Certified / OSHA Certified.

Drilled close tolerance holes. Installed high lock rivets.

Completed all required paperwork in connection with assigned normal duties, document time and work completed in appropriate systems, and create any required documentation.

Expert at using Rivets Guns, Bucking Bars, C-Squeeze Drills, 90 Degree / Straight Grinders.

Trimmed, Drilled, Reamed, Countersunk, Grinded, and Finished parts to specifications, used templates, hand tools, and pneumatic tools

Perform disassembly, cleaning, inspection, repair, fabrication, manufacturing, maintenance, and assembly of aircraft and aircraft parts, components and wiring. Documenting work per company, customer and regulatory requirements.

Heavy Structure Sheet Metal & Avionics & Electrical Mechanic,

Aerotek – Avcon Industries Aug 2019 – Oct 2019

Used predetermined methods, operations, setups, and prescribed specifications to inspect visually in-process and completed units and subassemblies.

Read and verified conformance with customer supplied engineering drawings and specifications.

Read, interpreted, and complied with Repair Station Quality Manual, Production Certificate Quality Manual, Standard Operation Procedures, Federal Aviation Regulations, Technical Manuals, Drawings, and Specifications.

Drilled close tolerance holes. Installed high lock rivets.

Experienced with drilling, counter sinks, rivet shavers, reamers, riveting, jig/fixture usage, and other tools associated with sheet metal repair.

Experienced with thin Contoured Structure, as well as large structural fittings helpful.

Troubleshoot and correct aircraft part and component discrepancies

Order, receive and return parts in accordance with company policies

Performed Lean, Standard Work and Continuous Process Improvements.

Skilled in communicating verbally and in writing in a manner that is clear, concise, accurate, and professional.

SAP Computer Software Experience.

Expert at using Rivets Guns, Bucking Bars, C-Squeeze Drills, 90 Degree / Straight Grinders.

Trimmed, Drilled, Reamed, Countersink, Grinded, and Finished parts to specifications, used templates, hand tools, and pneumatic tools.

Heavy Structure Sheet Metal & Avionics & Electrical Mechanic,

Textron – Cessna / Hawker / Beechcraft Aerospace Apr 2018 – Aug 2019

Used predetermined methods, operations, setups, and prescribed specifications to inspect visually in-process and completed units and subassemblies.

Read and verified conformance with customer supplied engineering drawings and specifications.

Read, interpreted, and complied with Repair Station Quality Manual, Production Certificate Quality Manual, Standard Operation Procedures, Federal Aviation Regulations, Technical Manuals, Drawings, and Specifications.

Drilled close tolerance holes. Installed high lock rivets.

Experienced with drilling, counter sinks, rivet shavers, reamers, riveting, jig/fixture usage, and other tools associated with sheet metal repair.

Experienced with thin Contoured Structure, as well as large structural fittings helpful.

Troubleshoot and correct aircraft part and component discrepancies

Order, receive and return parts in accordance with company policies

Performed Lean, Standard Work and Continuous Process Improvements.

Skilled in communicating verbally and in writing in a manner that is clear, concise, accurate, and professional.

SAP Computer Software Experience.

Expert at using Rivets Guns, Bucking Bars, C-Squeeze Drills, 90 Degree / Straight Grinders.

Trimmed, Drilled, Reamed, Countersink, Grinded, and Finished parts to specifications, used templates, hand tools, and pneumatic tools.

Sheet Metal Assembly Mechanic Process C-M01C,

Spirit AeroSystems Nov 2007 – Oct 2017

Inspected manufactured products and manufacturing processes to ensure compliance with customer specifications and purchase order requirements.

Inspected vendor supplied products to ensure compliance with contract requirements.

Assisted other employees in the performance of their job assignments through coaching, mentoring, and guidance.

Accepted, rejected, or reworked defective or out of conformance assemblies.

Read and verified conformance with customer supplied engineering drawings and specifications.

Communicated defect details in an effective manner to appropriate parties.

Monitored and verified quality in accordance with statistical process or other control procedures.

Sealed & MVP Certified / Flat Peen Certified / OSHA Certified.

Drilled close tolerance holes. Installed high lock rivets.

Completed all required paperwork in connection with assigned normal duties, document time and work completed in appropriate systems, and create any required documentation.

Expert at using Rivets Guns, Bucking Bars, C-Squeeze Drills, 90 Degree / Straight Grinders.

Trimmed, Drilled, Reamed, Countersunk, Grinded, and Finished parts to specifications, used templates, hand tools, and pneumatic tools.

Perform disassembly, cleaning, inspection, repair, fabrication, manufacturing, maintenance, and assembly of aircraft and aircraft parts, components and wiring. Documenting work per company, customer and regulatory requirements.

Composite / Graphite,

PCI New Co Nov 2005 – Nov 2007

Forklift Certified. Read & Interpret Composite Sheets. Ability to trim to specifications.

Light duty assemblies and finished work-cutting, sanding, bonding, trimming, smoothed over areas, applied sealing resins.

Experienced of ply orientations and vacuum bagging processes.

Water & Sewer Foreman / Lead

UMC Jan 1998 – Nov 2005

7 years’ experience running earthwork crew.

Set up and used and instrumented, rotary laser and grade control.

Read, Understood plans specifications, details and Performed dimension and takeoff quantities of plans.

Performance with exceeding daily/weekly pipe footages and units.

Daily reported on all crew activities, materials, and trucking.

Advance scheduled materials and inspectors for work to flow without interruption.

Followed schedules and interactions of other subcontractors that conflicted with our work scope and limited production.

Knowledgeable of equipment and its abilities and limits. Safeguarded that all equipment was safe to operate.

Read, Understood plans, percentage of fall, specifications, details, use of proper materials such as bedding and backfill.

CCTV, CPR, Confined Space, Scaffolding, Safety Certified.

EDUCATION

North High School (Graduated) May 1994

Wichita North High School Diploma

Contact this candidate