Amir Hosseini, P.E, MSc

Process Engineer

Email: admpg4@r.postjobfree.com

**** ***** **** **., ***** Land, TX 77479

Phone: +1-408-***-****

USA citizen

SUMMARY OF QUALIFICATIONS

Engineering and EPC companies experience: Fluor, McDermott, Mott

Field experience working in plants and projects for Operating Companies: TOTAL, Eni (Italian oil, gas, refinery operator)

P.E.; Registered Texas Professional Engineer in Chemical Engineering (TBPE)

Working experience as lead engineer, principal, sr. process in projects such as:

oLNG, Liquefaction, Storage tanks and Loading facilities (FST)

oRefinery- FCC slurry filtration, Amine Treating & Regeneration

oGas Processing-Gas Sweetening plant (MEG), Dehydration unit (TEG), NGL

oOil/Gas production facilities - Oil/Gas wells, manifolds, flow lines, separation and desalting, Gas lift, Gas injection, Water injection (WI)

oPipeline- Compressor stations, oil and gas transferring, metering station, pigging

oWaste Water Treatment

Experience on BASIC DESIGN, DETAIL DESIGN, Revamping projects, preparing process engineering deliverables, technical documents, drawings and calculations like PFD, P&ID, design basis, simulation, H&M balance, PSV sizing, datasheets, Philosophies and process notes

Hands on experience on OPERATION SUPPORT, PROCESS TROUBLESHOOTING, optimization and improving plant quality performance

Experience on Bid technical evaluation, MOC (management of change)

Experience on PSM & responsible engineer or member on PHA, HAZID, HAZOP, SIL

Experience on Safety system, control system, DCS, PLC, SIS

Experience on COMMISSIONING, START UP AND OPERATION

Flow assurance, sizing & hydraulic calculation, slug volume estimation experience familiar with relevant softwares

Proficient in working with process softwares like ASPEN HYSYS (static, dynamic), Fathom, Pipsys, PIPESIM, PROII, Flare net, HTRI, Pump FLO

Simulation-Value recognition award received from Fluor for ExxonMobil project due to 2.8 million$ cost savings in Sakhalin Project in Russia simulated and designed in Houston

MCDERMOTT Houston, USA (2019-July2020)

Principal Process Engineer

Woodfiber LNG Project –Detail Design

Detail design- LNG project with capacity of 2.1 MTPA. Plant is located in Vancouver; Canada and includes gas receiving unit, sweetening unit, dehydration unit, liquefaction, FST (Floating storage tank) and utilities.

Responsible for PFD and P&ID development of gas units and floating storage tanks, design review, Hysys simulation, calculations, material balance, modifying the philosophies, verifying and validating client comments and attending to technical meetings, HAZOP, etc.

MOTT Corp. Houston & Ulsan- Korea (2016- 2019)

Process/engineering Lead

S-Oil Refinery FCC slurry oil product upgrading

Basic & Detail design, Commissioning and Startup, operation and safety

Project was improvements of FCC unit slurry production and increasing the performance of unit making better quality fuel by using LSI catalyst separation technology and filtration system. I worked as process and engineer lead during basic and detail design making sure all required technical documents are delivered and safety aspects and standards are met. We also were responsible on commissioning, start up and debottlenecking/ trouble shooting and operation process support.

Process Engineer Baharat Refinery Kochin, India

FCC slurry oil product upgrading

Basic & Detail design including PFD and P&ID development, engineering deliverables, Hazop, Commissioning and Startup

Increasing FCC unit performance by adding LSI filtration package and responsible on commissioning, start up and debottlenecking/ trouble shooting of the unit considering all safety aspects in plant.

Process Engineer Texas City, USA

Marathon Refinery FCC slurry upgrading

Basic & Detail design including PFD and P&ID development, engineering deliverables, Hazop, Commissioning and Startup

FLUOR Houston (2011 – 2016)

Process Section Lead - Basic & detail design

Sakhalin Project Russia

FEED + EPC

After finishing Conceptual study and Basic design phase of Odoptu (part of Sakhalin project) by our team, project moved to detail design phase. Sakhalin Island is located at the east of Russia. New oil, Gas and water injection wells, manifolds, production pipeline, Gas/water injection pipelines, slug catcher, testing facilities, Gas compression system, TEG Gas dehydration unit, waste water treatment, water injection, Gas injection compression, Gas lift and new utilities are adding to the existing system as part of project in North well site and South well site. Oil production rate is 55 kbpd and Gas production is 220 mmscfd. I was overall process supervisor for design and engineering of process units on this project, responsible for simulation PFD and P&ID development of all plant and meanwhile responsible for process engineering and design of Gas dehydration and regeneration unit.

Recognition award received for saving 2.8 MM$ of project cost by presenting an idea on arrangement of process equipment after simulation of plant (Aspen Hysys) and therefore deletion of few vessels.

Principal Process Supervisor

Fluor

Engineering support on projects

Preparing deliverables and calculations

Sadara Chemical complex- Saudi Arabia

Sasol GTL project- LA, USA

BG-LNG project- LA, USA

Eni London, Tripoli (2007 – 2011)

Senior Process Engineer/Operation support

Melitah/Wafa/Sabrata

Onshore/Offshore Gas and oil Plant/Projects

Working in de-bottlenecking and trouble shooting of offshore & onshore / oil and Gas plants

oWafa Sweet Gas Onshore Plant (14,000,000 sm3/d or 495 mmscfd)

oSabrata Offshore Sour Gas Plant (27,000,000 sm3/d or 995.7 mmscfd)

oMellitah Sour Gas complex (24,000,000 sm3/d or 850 mmscfd)

oWafa NGL Plant(30,000 sbpd),Wafa Oil Field (30,000 sbpd)

Technical support of Offshore & Onshore Gas plants including Gas sweetening, Gas dehydration, NGL recovery, tank farms, export facilities, etc. by utilizing simulation software, sizing tools, international oil & Gas codes and standards along with practical experience

Member of Bid technical evaluation committee, organizing technical meetings, presentations and reporting, Hazop, Peer review, and design review meetings

Projects:

Inlet Gas Compressor project-Turbo compressors

Onshore Gas Plant Capacity Enhancement Project

Oil Plant Capacity Enhancement Project

Pipeline/Trunk-line/ Flow-line hydraulic studies; Single and Network; using Pipsim, Pipsys

Waste Water Treatment system de-bottlenecking

Preparing and issuing technical documents and technical advises for offshore/onshore Projects & Plants.

DALEEL

Lead Process Engineer (2005 – 2007)

Operation Support Engineer

Muscat, Oman

Sizing of new oil pipelines and networks on oil gathering station and Gas pipelines and supervision of all process activities, attendance in Hazop studies, member of new Gas plant project /tender and responsible for some projects as project engineer. Technical support of new projects, reviewing of the plant necessities for future required production capacity.

BINA (2001 – 2005)

Lead Process Eng

Bina Multiple Projects

Tehran, Iran

Supervision of process engineers involving to the basic design and detail design engineering of some projects. Several projects have been done i.e. Tehran Oil Refinery project, Shazand Oil Refinery or Four Compressor Station project, which installed on four different points of main Gas transmission Trunk LINE in Iran.

Basic Design engineering and EPC of Tabnak Gas refinery including reception facilities, NGL extraction and NGL fractionation The Project was basic engineering and EPC of Tabnak Gas field with capacity of 760MMscfd.

TOTAL (1999 – 2001)

Senior Process Engineer Operation Support

(Offshore/Onshore) Phase 2&3

TOTAL (2 x 1000 mmscfd) Gas-Condensate

Project was commissioning, startup and troubleshooting of a big offshore and onshore gas condensate plants with production rate of 2000 mmscfd Gas and associated condensate from South Pars Field including wells, manifolds, Sealine and all production and utility plants. As senior process engineer I was responsible for process engineering activities in offshore facilities, sea-lines & few onshore units in Gas treating and processing plant. Plant was including processing units like condensate stabilizer, Gas sweetening, Gas dehydration, NGL recovery, tank farms, export facilities, etc. Provision of process notes and trouble-shooting at-site during commissioning and startup of project was other part of my activities.

EDUCATION and PROFESSIONAL License

Bachelors of Science, 1992, Chemical Engineering, Abadan Institute of Technology (AIT), College of Oil, Abadan, Iran

Masters of Science Industrial Engineering, 2000, Tehran Azad University, Tehran, Iran

SUMMARY OF SKILLS on SOFTWARES

Aspen Hysys Simulation (basic & advanced), Pipesim

Pipe Phase, Olga 2000 (Scandpower ), PROII, Fathom, VESA, PALS

Pipe Line Management System, Flare Net, PMS Simulation, INDISS

OTHER

Fluent in English and Persian (Farsi); moderate in Azeri (Turkish) and basic in Arabic

References available upon request

Contact this candidate