Panda Mechanical Engineer

EDEN B. ANFONE

MECHANICAL ENGINEER

Abhu Hamour, Doha, Qatar

Doha, State of Qatar

Mobile: +974-********

***********@*****.***

Position Applied : HVAC Project & Maintenance Engineer Nationality : Filipino

Qatari ID # : 2 7 6 6 0 8 1 1 2 0 5

Passport # : P2311835B, Valid till 2029

Driving License : Valid Qatar Driving License

Looking towards where my knowledge, creativity, personal skills can be employed, developed. and to contribute and share my expertise and continuous learning of new trend technology.

Self-motivated goal getter and effective communication skills

Professional with over 6 + (17 Years in GCC) of combined experience in OIL & GAS, Industrial & commercial industry, Involve & familiar of all types HVAC Maintenance & Installation, Testing commissioning, Inspection, MEP Project Execution & Maintenance/Estimation & Tender /Project Planning / Safety policy/ Facility Operation, Material inventory also Familiar of Maintenance of all kinds of Plant mechanical equipment Units system and controls.

Solid background in interpreting Mechanical & Electrical design, P& ID, lay-out / Schematic diagrams. CAD models and equipment OEM manuals and evaluating of equipment breakdown, recommended spare parts replacement and root cause analysis evaluation method.

Strong analytical power with excellent capability in resource management and training capability.

Dynamic, skillful, and well-organized approach to modern HVAC equipment & controls.

Well-developed ability to lead, organizes, direct and motivates people at all level.

Able to emphasis and work with people of different backgrounds and cultures. EDUCATIONAL ATTAINMENT

Bachelor of Science in Mechanical Engineering

Manuel L. Quezon University, Manila Philippines

Diploma In Marine Engineering

Technological Institute of the Philippines, Manila Philippines

Secondary – High School

St. James high School – Recoletos,

Subic Zambales, Philippines.

PERSONAL INFO

CARRIER OBJECTIVE

SKILLS AND COMPITENCIES

CV Page 2 of 7

HVAC Equipment, Petra -Chiller Comprehensive Training Doha, Qatar

Commissioning Safety in oil and gas industry PHASE, Doha Qatar

Essential to oil and gas industry PHASE Doha Qatar

Highway Construction & Traffic Management Control PHASE Doha Qatar

Hydrogen Sulfide, H2S Venture gulf training center Qatar

Electrical Safety Venture gulf training centre, Qatar

Confined Space Entry Venture gulf training centre Qatar

Ladder safety Venture gulf training centre Qatar

Basic occupational Health & Safety PHASE, Doha Qatar

Safety Induction Course Qatar Steel, Qatar petroleum NGL, Oryx GTL, and Refinery

Boeing Terminology & Statistical Process Control DJ Aerospace,….American Naval base, Philippines

Computer Aided Design – Metal industry research and development center (DOST)………Philippines

Industrial Exposure Program – Department of trade and industry….DTI, Philippines

Philippine Geothermal plant – Familiarization of Mechanical Equipment & HVAC system…Philippines

American Wire & Cables – Familiarization of Electrical cables Philippines

ISO10012 –Standards for quality assurance requirements for measuring equipment

AS9100 – Aerospace standard for quality system

AS9102 - Aerospace standard for first article inspection

ISO 9001:2000 –Standard for Maintenance / HVAC installation and maintenance.

ASHRAE – American Society of Heating refrigeration and Air-conditioning Engineers.

SMACNA – Sheet Metal Air Conditioning Contractors National Association.

Master Cam / Cad Cam software version. 5.5; 6.13; 7. 2, 8.20 (2D & 3D Model)

Computer aided manufacturing, CAM & Computer aided Inspection, CAI – CMM

WIN CMES software version 14.0 – Programming for aircraft parts/component

HVAC HAP DESIGN Version 4.41 (Hourly Analysis Program), HVAC Heat Load

AUTOCADD 2004 - 2007

Primavera P6 Software - For Planning

Microsoft application, MS word/Application, Excel and Power Point PROFESSIONAL QUALIFICATION – TRAINING, PTW, AND SIMINAR ISO - TECHNICAL SKILLS

COMPUTER SKILLS

CV Page 3 of 7

COMPANY : KASSIM DARWISH FAKHROO & SONS

(DMEC, Darwish Mechanical & Elect. Co.)

Subsidiary of M/s KDS group of state of Qatar)

is a EN ISO 9001:2000 accredited company

PROJECT: MAINTENANCE & INSTALLATION OF HVAC EQUIPMENT Site Location: QATAR PETROLEUM - Around Qatar

Natural Gas Plant, NGL Doha Qatar - Mesaieed

Refinery Plant Doha Qatar - Mesaieed

Dukhan Facilities Doha Qatar - Dukhan

Ras Laffan Gas Plant Doha Qatar, Ras Laffan Ras abhu abuod QP Facilities Bldg… Doha, Qatar

Oryx GTL, Ras Laffan Plant Doha Qatar, Ras Laffan Qatalum Facilities Doha Qatar - Mesaieed QVC Facilities Doha Qatar – Mesaieed

Qatar Airways Facilities Building Doha, Qatar main Qatar Military, Shooting range Camp...Doha, Qatar

DATE : October 2009 TILL DATE, Currently working in QP Dukhan Facilities POSITION : Sr. HVAC – Project & Maintenance Engineer JOB AND REAPONSIBILITIES:

Handling /Supervision and Coordination to the client of all HVAC Maintenance & Installation, Inspection, & servicing of various types of plant mechanical equipment, Include all types of MEP Maintenance, in all government sites in the state of Qatar.

Implementation of HVAC Maintenance planning (by Monthly, Quarterly and Annual)

Responsible of verifying of work orders and execution of MEP Maintenance and installation plan.

Guiding of HVAC Installation and Maintenance of different types of system and BMS control

Participation in new tender and Stock inventory controls.

Manpower planning and related labour and staff issues.

Projects costing and budgeting & prepare commercial proposal / BID price.

Implementing of new HVAC equipment modifications of systems as per client’s requirements

Monthly reports on site progress /Planning status and follow up of work orders.

Prepare project work schedule/ PPM and MEP Maintenance plan including toolbox talk.

Responsible for all handing over project document submission

Handling project execution, planning, Review and prepares QA Procedure and safety procedure

Review of different HVAC standard such ASHRAE and SMACNA.

Knowledge of making heat load calculation using HAP 4.41 system design.

Responsible of making Air Balancing Test Report and RFI reports.

Responsible of INSPECTION of all HVAC installation maintenance &their associated equipment

Responsible of making PPM Plan, LIFTING PLAN, JHA and METHOD STATEMENT for HVAC maintenance and installation project.

Perform site inspection and compliance and Liaise to third parties consultant for equipment certification approval.

PROFESSIONAL EXPERIENCE

CV Page 4 of 7

COMPANY: AL OHOOD CONTRACTING COMPANY

3rd. bldg. Al Atlal District Abdullah Bldg.

P.O Box 54352, Jeddah KSA

PROJECT: MEP - HVAC Installation and Maintenance

Site Location: Around KSA, Jeddah, Riyadh, Dammam, Taif, etc. Saudi Aramco Plant & Facilities, HVAC Maintenance…..Jeddah/ Riyadh KSA LG Complex tower Riyadh KSA

Sabola Group Jeddah, KSA

Saudi royal Palace Riyadh KSA

Saudi Royal Housing and Facility Jeddah, KSA Toys R Us Jeddah, KSA

Red Sea Mall Jeddah, KSA

Panda Hypermarket Mall Project Jeddah, KSA Saudi Processing Cement plant Dammam,KSA Taif resort & Hotel Taif, KSA

Date: November 2005 – May 2009

POSITION: MEP – HVAC Mechanical Engineer

JOB AND REAPONSIBILITIES:

Handled & supervision of all Installation & HVAC Maintenance, MEP Mechanical equipment, Pumps, Ventilation, Cooling tower, Actuator, Valves, Control room BMS etc., in all facilities plant in Saudi Aramco.

Estimation, planning, procurement, project execution for construction, renovation and fit-out works.

Review and establish as per contract drawings, project specification & contract bill of quantities

Implement site mobilization, temporary facilities required at site and deploy the manpower required to begin the work.

Daily monitoring activities of preventive & corrective maintenance & to follow up of work orders and work notification

Prepare project work schedule, material submittal schedule, drawing submittal schedule, material enquiries with all required data and send to suppliers for quotation and evaluate the same against specification.

Attend site meetings with the client / general contractor client and provide site progress report.

Prepare RFI’s and get approval from consultant.

Decide approved specialized sub contractors to get the best possible prices to manage control project cost.

Prepare and develop testing procedures & O & M manuals.

Scheduling, planning Testing and Commissioning and proper handing over of HVAC equipments and project documentation.

.

PROFESSIONAL EXPERIENCE

CV Page 5 of 7

COMPANY: DJ AEROSPACE

American Naval base Argaunot Industrial Park

Naval Magazine Area, Subic Bay Philippines.

PROJECT: MILITARY AIRCRAFT AND

COMMERCIAL AIRCRAFT COMPONENTS

Boeing Aircraft Parts

Cesna Aircraft

Lockhead Martin

Date: July 2001 – June 2005

POSITION: QA/QC – Mechanical Engineer

JOB AND REAPONSIBILITIES:

Responsible of making programs using LK CMES SOFTWARE for every aircraft component.

Supervise shop technician and machinist and coordinate to the shop manager.

Checking of aircraft component using CMM (Coordinate Measuring Machine) precision tools such as caliper, high gage, micrometer, pin gage, bore gage etc. & inspection of all standard gages, test equipment and tooling used to manufacture product.

Responsible for documentation of QA/QC test report and validation of result.

Checking of finished product on their measurement and tolerances and as per aerospace manufacturing standards & in reference with Aircraft international standard and first article inspection.

Preparation of inspection report, incoming materials and preparation of traceability reports.

Check and review mechanical drawing and verify using cad model if there are any changes

Implement and maintain the equipment control program including equipment calibration, validation and report quality system performance for management review and quality improvement, documentation of necessary inspection and test instruction.

Conduct test & analyses of aircraft parts & materials to determine their grain direction and other characteristic, Prepares aerospace standard programs and schedules for operation.

Prepares test result and evaluate non - conformance for improvement. PROFESSIONAL EXPERIENCE

CV Page 6 of 7

COMPANY: EEI – ELECTRODYNAMICS CONSTRUCTION & DEV’T. Bagong ilog, Pasig city, Manila, Philippines

PROJECT: POWER, FACTORY,CEMENT PLANT

Site Location COMMERCIAL AND INDUSTRIAL BUILDING- Around Philippines Bulacan Cement Plant Philippines

Coca Cola Bottling Plant Philippines

Pepsi Cola Bottling Plant Philippines

Pagbilaw Geothermal Plant………Philippines

RCBC Tower – Makati City………Philippines

Date: December 1997 – April 1999

POSITION: Junior Site Coordinator

JOB AND REAPONSIBILITIES:

Handle all accreditation, site inspection and documentation.

Coordinate with Sr. Mechanical Engineer & Assist in mechanical Equipment installation schedule during construction project of HVAC, Electrical Panel, Pumps, Ventilation, BMS Controls, Chiller, Plumbing & Piping works etc.

Attend site survey and inspection for costing purposes.

Daily monitoring at site / and submit project status report on percentage basis and safety related concern

Check and review mechanical plan, prepare & arrange necessary work permits.

Liase to 3rd. party consultant for approval of heavy equipment certificate validation.

Compliance of RFI, Request for inspection of project as per approved design & drawings.

Philippine Society of Mechanical Engineers

Association of Marine Engineers of the Philippine

Association of Safety Engineers - Doha, Qatar.

PROFESSIONAL EXPERIENCE

AFFILIATION

CV Page 7 of 7

1000 ton capacity York YK Centrifugal chiller +Cooling tower, Pumps, BMS (Allen Bradley)

300 – 200 ton capacity YCAS York Air cooled (Screw type Chiller)

80 – 120 ton Millennium York Screw chiller YCUL York Air cooled condensing unit (CDU)

155 - 210 ton capacity Trane Screw chiller

30-50 ton capacity scroll Compressor, York

70/80 ton capacity SKM Air cooled chille (Semi hermetic)

100- 120 ton capacity 30GX I 30xa Carrier Chiller

17 ton Capacity Mcquay, Mcenergy Evolution model

50-100 ton SKM capacity water cooled & air cooled

Tandem Compressor Bitzer/ Copeland and from 15 to 100 ton capacity package and central Split units in different make York, Trane, LG, Petra PPHc, Carrier, Mcquay/Daikin, Royal water cool, Explosion proof Central AC, SKM, AHU, Split, VRV/VRF, BMS Fans, Pumps, Exhaust Fans, Ventilations, Actuator, Valves, Piping, Ducting, Water Cooler, Split AC,

Upon Request

The above information is true and correct to the best of my knowledge EDEN B. ANFONE

Applicant

END

MECHANICAL - HVAC FAMILIAR EQUIPMENT & MAKE

REFERENCE

Contact this candidate