ARUNRAJ.K.N

Mobile: +918*********

E-Mail: admlws@r.postjobfree.com

Seeking suitable assignments as an Inspection Engineer/Quality Engineer from oil & gas Refinery Construction with a growth-oriented organization. QA/QC Engineer /Inspector having experience of 13 +years in Oil and Gas, with Kuwait Valid Driving License

(Kuwait society of Engineers membership Holder-KSE Membership No:33146) Professional Synopsis

A competent professional with 13+ years of experience in the areas of Quality Assurance / Control fields like (Welding & installation Inspection of tanks, pipes, pipeline, structure & Material Inspection Etc.). Proven expertise in coordinating with client, consultants, subcontractors and construction workers. Familiar with the codes ASME section II, Section VIII, section V, ASME B31.3, Section IX, AWS D1.1, AISC and API codes API 650, API 510, API 1104 & Shell standards. Career Highlights

Monitoring welder’s performance and conducting visual inspections of welds and repairs of welds in accordance with company procedures and international codes of practice. Profound knowledge in different welding processes like SMAW, GTAW,SAW,EGW and GMAW etc Familiarization of material inspection, dimensional check and documentation as per construction, Material standards such as SA 515, SA 516,SA537 SA 316,ASTM106,ASTM53,ASTM333,ASTM335&ASTM312&IS2062. Checking, inspecting and testing incoming welding and construction materials to ensure they meet project specification requirement.

Coordinating with clients to undertake Procedure Qualification Tests (PQT) and inspections of prepared test specimens and witness destructive tests.

Identifying and reviewing Welding Procedure Specification (WPS) & PQR for jobs as per project specifications and verify Welders meet PQR requirements. Conduct the tie- in work inspection activities.

OIL & GAS Pontoon roof tank construction stage wise inspection as per our ITP. Make sure that any non-conformity has been reported through a Non Conformance Report

(NCR), reviewed by our line construction supervisor. Responsible for all painting inspection. Check at all stages the proper application of contract Specification and the approved procedures related to the applied coating system Make sure that all materials used comply with the approved Material Approval Request (MAR). To conduct inspection of raw materials and review of Material Test Certificates (MTC). Ensure that materials supplied by contractors and producers meet standards and comply with specifications.

Equipment’s (static & rotating) inspection based on ITP Conducting fit up and dimension inspections as per Inspection and Test Plan (ITP) and to provide technical guidance for welding sequence and distortion control. Monitoring of Preheating, Welding and Weld Visual Inspection, NDT / Hardness Test, etc and document verification

Education& Certification

B E(Mechanical Engineering-Anna university Chennai ) MBA-Human Resource (Distance education mode) IRCA

ISO9001-2008 Lead Auditor certification CSWIP-3.1

Welding Inspector (Cer No:60998)

BGAS Painting Inspector Grade-2( Cer no:112128)

ASNT LEVEL-II in UT, RT, MPI&DPT

Professional Experience

From October2018 to October2020 with Saipem Spa Company as a Senior QC Inspector Projects Undertaken:

Project: AL-Zour Refinery Project Kuwait

Job Responsibilities:

Cordinate with KNPC for tie-in inspection activities. Carry out surveillance on Fabrication works, identify areas of non-conformance and raise NCRs upon non- conformances.

Coordinate with subcontractor and witnessed the welder qualification test (WQT) Equipment (static & rotating)overhauled reinstallation inspection based on ITP. Conduct the subcontractor quality auditing and provide audit finings. Arrange and coordinate internal audits

RT film interpretation

Hydro test package review and witnessed the test.

From June2015 to October2018 with Consolidated Contractor Company as a Senior QC Inspector Projects Undertaken:

Project: Clean Fuel Project Kuwait

Job Responsibilities:

Review WPS& PQR and witnessinspection for Welder test (WQT)/Procedure qualification Arrange and coordinate internal audits

Ensure Welding is as per approved Welding Procedure specification and Monitor Storage, handling and baking of Welding Consumable

Carry out visual and dimensional checks of equipment, skid and structures as per approved drawings Perform Fit-up and welding/Final Inspections as per ITP to ensure conformance to respective codes. Conduct tie-in inspection activities.

Coordinate hydro test package preparation & review Monitoring of Preheating, NDT / Hardness Test Performing RT film interpretation

From Aug2014 –Feb2015 date with HOT Engineering & Construction, Kuwait as a QA/QCEngineer Projects Undertaken:

Project: Wara pressure Maintenance Project

Client: KOC/GS E&C

Job Responsibilities:

Review WPS& PQR and witnessinspection for Welder test (WQT)/Procedure Qualification. Arrange and coordinate internal audits

Making quality plan and conducting weekly quality meeting to review and improve the quality of projects. Ensure Welding is as per approved Welding Procedure specification and Monitor Storage, handling and baking of Welding Consumable

Carry out visual and dimensional checks of equipment, skid and structures as per approved drawings RT film interpretation

Hydro test package preparation

Monitoring of Preheating, NDT/ HardnessTest

Preparing TestPackandwitnesshydro testing.

Conduct the welder qualification test

Performing all TIE IN inspection

Verifying the abrasive and paint materials as per the specification Checking the Environmental conditions before blasting and painting Monitor Climate conditions such as Air Temperature, RH%, Dew point etc Surface preparation Inspection (Garnet, Shot, Grit, Copper Slag) . Conduct Procedure Qualification Test (PQT) for all paint system and Blaster/Painter From January’2013 - January’2014 with GS Engineering & Construction (Korean company), Abu Dhabi ADNOC as a QA/QC Welding Inspector

Projects Undertaken:

Project: Inter Refinery Pipeline project (IRP-2)

Client: ADNOC/TAKREER

Job Responsibilities

Review WPS& PQR and witness inspection for Welder qualification test (WQT)/Procedure Qualification. Identify sourcing for material, verify incoming sources and conduct periodic material inspection. Ensure Welding is as per approved Welding Procedure specification and Monitor Storage, handling and baking of Welding Consumable.

Conduct any additional Test, if required by the project Requirements. To verify materials as per mill certificate and specification. Compiling report for material record and documentation. Perform Fit-up and welding/Final Inspections as per ITP to ensure conformance to respective codes. To carryout Inspection of fabricated structures& Supports.

Carry out surveillance on Fabrication works, identify areas of non-conformance and raise NCRs upon non- conformances.

Conduct the welder qualification test (WQT)

Equipment (static & rotating) inspection based on ITP OIL & GAS Pontoon roof tank stage wise inspection as per our ITP Arrange and coordinate internal audits

RT film interpretation & Hydro test package preparation Co-Ordinate with third party inspection agencies for all related inspection activities. From October’2010-November’2012 with Global Pacific Engineering & Construction as a QA/QC Engineer

Projects Undertaken:

Project: Green Diesel Project, Ruwais Abu Dhabi

Client : ADNOC/GS E&C

Project: Dubai airport oil pipeline Installation

Client : DANATA

Project : Lusail Oil Pipeline project

Client : LUSAIL Development cooperation

Job Responsibilities

To conduct inspection of raw materials and review of Material Test Certificates (MTC) OIL & GAS construction tank stage wise inspection as per our ITP Conduct the quality inspection of pipe fabrication, fitup&welding according to drawing and ITP. (47 km pipe line, size from 2 inch to 52inch& 100% radiography pipeline ) Pipe line (GRE,CS,MS,CI,AL&SS) joint welding,laying & Hydro test inspections Performing welding inspection and welder’s performance qualification. Co-Ordinate with third party inspection agencies for all related inspection activities. Conducting Visual Inspection of weld joints along with interpreting Radiographic films. Prepar Performing welder consumable control.

From January’2009- October’2010 Wilson Enterprise Electrical & Mechanical Contractors India, as a QC Inspector

Projects Undertaken:

Project: Jamnagar Refinery Project Phase -2

Client : RIL/L&T

Job Responsibilities:

To Plan and conduct sub-contractor inspection activities and reviews of sub-contractor activities Conduct the welder qualification test (WQT)

Implementation of the Project Quality Plan

Design plant drawing (Auto CAD) and handling production. Preparing Test Pack and witness hydro testing.

equipment (static & rotating) inspection based on ITP OIL & GAS Pontoon roof tank stage wise inspection as per our ITP Arrange and coordinate internal audits

Leading welding inspection and welder’s performance qualification Performing Non-destructive testing methods and interpreting Radiographic films. From April’2008- December’2008 in Furnace Fabrica (I) Ltd as a Piping Engineer, Konkola

(KCM), Zambia

Projects Undertaken:

Project: Konkola Copper Mine H2SO4 & Oil Pipeline Project Client : KCM

Job Responsibilities:

Field execution of pipe fabrication, erection according to drawing and Process and Instrumentation Drawing.

Assuring the pipe quality as per ASME Standards.

Familiar with SA 312, SA 106, IS 2062, cross country pipe line and Cast Iron Pipes Coordinate the welder qualification test (WQT)

Coordinate the Hydro test activity

From May’2007- March’2008 in L&T Ltd company (contract basis, manpower supply) as a Piping Engineer

Projects Undertaken:

Project : Jamnagar Export Refinery Project

Client : RELEANCE INDUSTIES LTD

Job Responsibilities:

Field execution of pipe fabrication, erection according to drawing and Process and Instrumentation Drawing.

Assuring the pipe quality as per ASME Standards.

Familiar with SA 312, SA 106, IS 2062, ASTM A106, ASTM A53 cross country pipe line and Cast Iron Pipes Assist Quality audit with Qc personnel

IT Skills

MS Excel, MS Word, MS PowerPoint. AutoCAD

Certification & Membership

2018 Kuwait society of Engineers membership Holder-KSE Membership No:33146 2015 IRCA ISO9001-2008 Lead Auditor certification

2010 CSWIP-3.1 Welding Inspector (Cer No: 60998)

2016 BGAS Painting Inspector Grade-2(Cer no: 112128) 2007

2009

ASNT LEVEL-II in UT, RT, MPI&DPT

Indian institute of Engineers -Associate Member

Personal Details:

Date of Birth: 25th August 1984

Permanent Address: Karimbuvalappil (H),

Choolipadam,

Poovanchira (PO),

Trissur

Kerala, PIN- 680652, India

Language Known: English, Hindi, Malayalam & Tamil

Driving license: India, UAE, Kuwait

Nationality: Indian

Marital Status: Married

Passport No.: M 6886298

Date of Issue: 10/03/2015

Date of Expiry: 9/03/2025

Place of Issue: Cochin

All the information furnished above is true to my knowledge till date.

(Arun Raj K.N)

Contact this candidate