Dennis Lamielle

*** *********** **.

Apt. ***

Fort Mill, South Carolina 29708

Cell: 803-***-****

Email: admkgs@r.postjobfree.com

Objective: Seeking an exciting and challenging position in the Engineering field

to utilize my experiences and skillset to further the company’s

product line and financial standing in their market.

Experience

J. J. Jenkins, Inc. Matthews, NC

Designer October 2017 to Jan. 2021

• Primary responsibilities included design & detailing of machines for the Monofilament and Slit

Tape Industries including Draw Stands, Hot Liquid Draw Tanks & Hot Air Ovens.

• Projects included Sheet Metal, Piping, Mechanical & Structural Steel per AISC and AWS.

• AutoCAD Mechanical 2016, Inventor 2016 & Solidworks 2016

Reynolds Industries, Inc. Fort Mill, SC

Mechanical Design Engineer August 2016 to Oct. 2017

• Primary responsibilities included design & drawing of Mixers, Dispersers, vessels and

associated equipment including piping. I assisted in the training of new employees in

procedures, engineering, design guidelines using Soliworks.

• Mechanical details according to ANSI 14.5 GD&T.

• Sheet metal details including small enclosures, guards, light mounting brackets.

• Implementation of Standards using Solidworks.

J. J. Jenkins, Inc. Matthews, NC

Designer October 2014 to July 2016

• Primary responsibilities included design & detailing of machines for the Monofilament and Slit

Tape Industries including Draw Stands, Hot Liquid Draw Tanks & Hot Air Ovens.

• Projects included Sheet Metal, Piping, Mechanical & Structural Steel per AISC and AWS.

• AutoCAD Mechanical 2016, Inventor 2016 & Solidworks 2016

Aerotek

Contract assignment @ J. J. Jenkins, Inc. Matthews, NC

Designer December 2013 to October 2014

• Primary responsibilities included design & detailing of machines for the Monofilament and Slit

Tape Industries including Draw Stands, Hot Liquid Draw Tanks & Hot Air Ovens.

• Projects included Sheet Metal, Piping, Mechanical & Structural Steel per AISC and AWS.

• AutoCAD 2013, AutoCAD Mechanical 2013, Inventor 2013 & Solidworks 2015

• Standards setup including layers, linewight, Best Practices, etc. for use with Autodesk Inventor.

• Creation of Standard Drawing Borders to current National ANSI Standards using Autodesk

Inventor incorporating Auto Populate of Title Block with placement of part views.

• Creation of standard ASME materials for incorporation into Inventor Materials Database.

LCI Corporation Charlotte, NC

Designer III February 2012 to August 2013

• Primary responsibilities included design & drawing of Pressure Vessels including Evaporators

and Vertical Dryers per ASME Section VIII, Div. 1.

• Projects included Structural Support steel per AISC and AWS.

• Piping, Pump and instrumentation packages per PIP and ASME standards.

• AutoCAD 2013, AutoCAD Mechanical 2013, Inventor 2013 & Solidworks 2013

• Reverse Engineering of standard parts off the stock shelf using micrometers and various other gages

to produce manufacturing drawings for machine shop.

• Standards setup including layers, linewight, Best Practices, etc. for use with Autodesk Inventor.

• Creation of Standard LCI Drawing Borders to current National ANSI Standards using Autodesk

Inventor incorporating Auto Populate of Title Block with placement of part views.

• Creation of standard ASME materials for incorporation into Inventor Materials Database.

Aerotek Assignment: LCI Corporation Charlotte, NC

Designer February 2011 to February 2012

• Primary responsibilities included design & drawing of Pressure Vessels including Evaporators

and Vertical Dryers.

• All designs were in accordance with ASME specifications.

Ward Tank & Heat Exchanger Charlotte, NC

Designer June 2010 to October 2010

• Primary responsibilities included design & drawing of Pressure Vessels and Heat Exchangers.

• All designs were in accordance with ASME specifications.

Reynolds Industries, Inc. Fort Mill, SC

Mechanical Design Engineer October 2007 to June 2010

• Primary responsibilities included design & drawing of Mixers, Dispersers, vessels and

associated equipment including piping. I assisted in the training of new employees in

procedures, engineering, design guidelines and AutoCAD.

• Mechanical details according to ANSI 14.5 GD&T.

• Sheet metal details including small enclosures, guards, light mounting brackets.

• I managed my own projects my final year with the company.

The Babcock & Wilcox Company Copley, Ohio

Component Technical Designer III October 2006 to October 2007

• Primary responsibilities included design & drawing of Superheater, Reheater, and Economizer sections following B & W and ASME codes using bent tube construction of various alloy and carbon steel tubing. My duties are split between checking coworker’s work and doing my own design/detail projects. Also included in my duties was the design and drawing of Water Walls for various sections of the boiler utilizing B&W membraned wall construction. Along with the designs, sheet metal was utilized as a Gas Seal to seal enclosures to prevent gas leakage. Knowledge of AWS standards was very important in this design due to the necessity of all welds being Gas Tight. AutoCAD 2006 (2-D & 3-D Modeling), SolidWorks 3-D and various proprietary programs were utilized in conjunction with MS Office. After completed layout, PMO'S were written with B&W software for material procurement. In many cases, due to lead time involved on the contracts, a material take-off needed to be done prior to beginning design of the contract and the PMO'S were written well before design was started to ensure the materials were in the shop ahead of manufacturing dates. Completed all Solid works Training Courses and was awarded Certificate of Completion.

The Babcock & Wilcox Company Barberton, Ohio

Project Technical Design Group, Technical Designer III May 2005 to October 2006

• Prepared Proposals, General Arrangements, Layouts and Pressure Part drawings for Boiler Design following B&W standards. Knowledge of Tube Standards such as material specifications for different grades of tubing materials, bending standards for different size tubing, various openings for equipment along with associated attachments and welding standards were required for this type of Preliminary design project work.

Babcock & Wilcox Corporation Barberton, Ohio

Component Technical Design Group, Technical Designer III March 2001 to 2005

• Primary responsibilities included design & drawing of Superheater, Reheater, Economizer sections following B & W and ASME codes using bent tube construction of various alloys and carbon steel tubing. Part of my duties included the design and drawing of Water Walls for various sections of the boiler utilizing B&W membraned wall construction. Along with the designs, sheet metal was utilized as a Gas Seal to seal enclosures to prevent gas leakage. Knowledge of AWS standards was very important in this design due to the necessity of all welds being Gas Tight. AutoCAD 2006 (2-D & 3-D Modeling), SolidWorks 3-D and various proprietary programs were utilized in conjunction with MS Office. After completed design, PMO'S were written with B&W software for material procurement. In many cases, due to lead time involved on the contracts, a material take-off needed to be done prior to beginning design of the contact and the PMO'S were written well before design was started to ensure the materials were in the Fab shop ahead of manufacturing dates.

Midlands Millroom, Inc. Canton, Ohio

Mechanical Designer Contract Assignment February 2000 to November 2000

• Assisted in the layout, design & detailing of machinery for the Rubber Industry. Windows based AutoCAD release 14 for Windows 98 was the CAD package being used.

• Mechanical Details done in accordance with ANSI 14.5 GD&T.

Ebner Furnaces, Inc. Wadsworth, Ohio

Piping CAD Designer Contract Assignment September 1999 to February 2000

• Responsibilities included the design of piping systems associated with company's annealing bells for heat treating of steel, aluminum and copper.

Steel Equipment Specialists, Inc. Alliance, Ohio

Project Engineer November 1997 to June 1999

• Assisted in the layout, design & detailing of machinery for the Steel Industry. DOS based AutoCAD release 12 & AutoCAD R14 for Windows NT was the CAD package being used.

Steel Equipment Specialists, Inc. Alliance, Ohio

Designer Contract Assignment June 1996 to November 1997

• Assisted in the design, layout & detailing of machinery and material handling equipment for the steel industry including coil, slab & billet handling. DOS based AutoCAD Release 12, Norton Commander and Windows 3.1 was the computer software used in the work environment with each CAD station. With exception of major difficulties, each individual operator managed stations.

FDM Corporation East Palestine, Ohio

Mechanical Designer Contract Assignment May 1996 to June 1996

• Layout, design and detailing of machinery for the Plastics processing industry.

• AutoCAD Release 12

Kohler Coating Machinery Corporation Greentown, Ohio

Mechanical Designer November 1990 to May 1996

• Assisted in the design of the companies Coating Kitchens for the paper mills incorporating state of the art instrumentation & control for full automation and documentation.

• Assisted in the design of various tension control systems in coating line for better quality coat weight using the finer control of line speed & tension.

• Design, layout & detail of "single coating station" paper line using single-sided arch drying & the company's ROD/BLADE coater with suction pull stand tension control.

• Participated in the standardization of proposal & general arrangement drawing standards for implementation into company design standards.

• Mechanical Details done in accordance with ANSI 14.5 GD&T

• Thorough knowledge of IBM computers, including DXF, IGS & IGES file transfer for use in other CAD packages.

• Experience in computer aided design (CAD) using AutoCAD second party software for implementation into AutoCAD drafting environment including Rel. 10, 11, 12, 13 & 14.

• Designed various programs for personal use in determining required line speed, coat weight & base stock necessary for daily output requirements using HEWLETT PACKARD programmable HP48GX computer.

• Educated myself on the use of the programmable HP48GX through diligent & dedicated study of various programming manuals sold by HEWLETT PACKARD included with plug-in engineering application cards. Included in these plug-in cards is the MECHANICAL ENGINEERING APPLICATION card which includes equations for beam & column analysis, fluid mechanics, gas laws, heat transfer, mechanics, stress analysis, vibration & machine design. All these equations have become very useful to me, especially in Coating Kitchen applications where all of the above does frequently occur in various form or another throughout the coating process. Also included in this software package are steam tables, universal, magnetic, mechanical & thermal constants, water physical properties, valve/fitting loss coefficients & relative wall roughness coefficients.

• Developed required computerized Bill of Material for each assignment which included such pertinent information as material specifications, vendors & various suppliers, cost & required lead time for timely delivery for incorporation into project.

• Interfaced with various other departments such as PRODUCTION CONTROL, FIELD SERVICE & PURCHASING to assure fairly smooth & orderly progression through project design to installation in the customer's facilities. Occasionally, this also involved correspondence directly with the customer for custom design of their facilities.

• Software used during my experiences at Kohler Coating included UNIX, DOS, Norton Utilities and AutoCAD REL. 10, 11, 12 & REL. 13 for Windows.

Seifert Technologies, Inc. Massillon, Ohio

Mechanical Drafter 1988 to 1990

• Assisted in the design of various steel mill equipment including CONTINUOUS CASTER FACILITIES, PICKLING DEPARTMENT designs including acid waste pipeline & storage facilities, coiling equipment & miscellaneous material handling including roll & belt conveyors.

• Detail of structural steel for supports & building steel.

• Detail of miscellaneous mechanical details for power transmission, material transfer & processing in the PAPER & PULP INDUSTRY.

• Detailing of various details for the steel industry.

• Detailing of piping systems for processing of liquid wastes.

American Electric Power Service Corporation Columbus, Ohio

Designer A 1979 to 1988

• Miscellaneous structural steel design & detailing associated with the generation, transmission & distribution of electrical power for residential & industrial uses using INTERGRAPH micro & mainframe cad stations.

• Concrete & reinforcing bar design/detailing for various steel support structures in electrical substation design including 765 kV down to 12.5 kV substations.

• Industrial building steel designs using AISC building, detail and design standards for the nuclear & fossil fuel power plant industries. Included were column schedules, vertical bracing & floor framing, roof & wall framing crane runway girders & miscellaneous support steel.

• Plant & substation site plan layout including required cut & fill data required for grading of property sites. Computer programs incorporating punch cards were often used in the process in addition to such devices as planimeters & geometric construction devices.

• Trained in the use of INTERGRAPH system using both the Interact Color Terminal and the Interpro Desktop Workstation.

Education:

Stark Technical College Canton, Ohio

Basic Structural Design, Part Time Courses 1980 to 1983

American Electric Power Service Corporation Canton, Ohio

5 year Apprenticeship, Structural Design 1979 to 1984

References: Available upon request

Contact this candidate