Calamba Brgy

* * * *

Blk-** Lot-* Villa Palao Brgy. Banlic Calamba City Laguna

Philippines 4100

Mobile: +639********* / +639********* / +639********* Email: ************@*****.***

Ronelito Mogro Lopez

Educational Background:

Vocational :Guzman Institute of Technology

Quiapo Manila, Philippines

Electrical Technology

(1984-1986)

POSITION ■ Electrical Technician

OBJECTIVE

■ To establish a career in my chosen field of profession in a suitable company that provides excellent opportunities for career advancement and development and where my practical experience and skills can be used to it’s best advantage.

CAREER SUMMARY

Broad Technical Experience in repairing, troubleshooting and maintenance of Plant Electrical Aspect.

Expertise covering PLC Controlled Machines, Electrical Facilities such as:

■ Refrigeration System

■ Steam Boiler System

■ Motor Control Center

■ Pumping Station

■ Generators and Power Station

■ Water Treatment Plant Facility

■ Heavy Equipments Maintenance Facility

EXPERIENCE

February 2014 to March 2019

Saudi Chevron Phillips

Jubail Industrial City Saudi Arabia

BASA Contracting Est.

Electrical Maintenance Contractor to Saudi Chevron Phillips November 2010 to November 2013

Saudi Chevron Phillips

Jubail Industrial City Saudi Arabia

AL HUGAYET Company

Electrical Maintenance Contractor to Saudi Chevron Phillips 2 o f 6

Electrical Technician

■ Electrical machines and power tools repair and trouble shooting.

■ Check lubes oil heaters including preventive maintenance.

■ Breaker Rack in / Rack out, Lock out / Tag out & Try

■ Insulation testing.

■ Resistance testing.

■ Rotation testing.

■ Pump motor run test.

■ Control circuit loop checking.

■ Control function checking.

■ Ground fault trouble shooting.

■ Wire up MCC starter as per design (480V square D).

■ 4160KV / 480V switchgear preventive maintenance.

■ 4160KV / 480V MCC preventive maintenance.

■ 4160KV / 480V function checking.

■ 480V dry type transformer installation and testing.

■ Heat tracing installation and preventive maintenance.

■ Heat tracing trouble shooting.

■ 480V / 277V perimeter lighting preventive maintenance and trouble shooting.

■ Performs plant shutdown for electrical activities. February 2006 to February 2010

HYOJONG Industrial Co. Ltd.

Ras Laffan Industrial City, Qatar

Industrial Electrician

■ Inspection and reporting of on going works and accomplishments.

■ Responsible for the material requisition and preparation prior to the commencement of each work assignments.

■ Gathering technical data on the machine/equipment need to maintain and/or repair.

■ Responsible for the local inventories and supply of electrical spare parts and issuance.

■ Responsible for the electrical items receivables and accountable.

■ In charge to other special project of the Electrical Section such as cable inspections, power panel fabrication, extension building electrical lay outing, civil works estimation and other infrastructure works assigned to the team.

■ Hands on to the troubleshooting and repair whenever needed. (Optional)

■ Responsible for the maintenance of the following equipments: Lincoln Welding Machine SAE 400 (6 units)

Lincoln Welding Machine Vantage 500 (5 units)

Miller Welding Machine Big Blue 500X (19 units)

3 o f 6

Engine Air Compressor Atlas Copco XAS-760

Diesel Engine Generator Atlas Copco Cummins AKSA AC703, 700kva (3 units) Diesel Engine Generator Detroit, 1250kva (2 units) Diesel Engine Generator Cummins NTA 855-G2, 375kva (2 units) Heavy Forklift TCM FD200, 20Ton

Heavy Forklift TCM FD300, 30 Ton

Heavy Forklift HYSTER V-903-C, 42 Ton

Forklift TCM FD -50, 5 Ton

Forklift Caterpillar DP – 70, 7 Ton

Mobile Telescopic Crane Tadano TR – 200 – M, 20 Ton Process Machines such as:

Bending Machines (Roll, V, Flange)

CO2 welding machines, Chowel OK 500 III, (30 units) CO2 welding machines, ESSAB Auto K400, (20 units)

Gantry Cranes 30/10 Ton dual lifter – one unit

Gantry Crane 30 Ton – One unit

Gantry Crane 10 Ton – two units

Spiral Pipe Milling Machine 406 -3200mm Diameter capacity (Wilson Byard SP3200)

Pipe Hydro Testing Machine – PLC controlled

Blasting and Coating equipments such as:

Auto Fitting Blasting Machine – PLC controlled

Auto Pipe Blasting Machine – PLC controlled

Auto Pipe Coating Machine – PLC controlled

Garnet recycling machine

January 2003 to February 2006

EMIRATES NEON Co. L.L.C

P.O Box 5975, Sharjah. U.A.E

Electrician

■ 3D Manufacturing & Preventive Maintenance

■ Preventive Maintenance of Indoor/Outdoor Signage like NEON Signs/FLEX Signs/Plastic Sign & Others.

■ Responsible in Safe Guarding/Troubleshooting of Electrical Installations Routine Checkup of Timer.

■ Perform Other Duties that may be assigned to me by the Electrical Maintenance Supervisor.

May 2002 to November 2002

RRN INCORPORATED

Makati City, Philippines

Electrician

■ Installation of Cable Tray/Cable Type Size 60 cm to 120 cm Power Fixture and Switches.

4 o f 6

■ Installation of Conduit Pipe Works/PVC Cable Pulling.

■ Fixing of Power Cable and Instrument Cable.

■ Fabrication of Support for Panel Base and all support for Conduit and Cable Tray.

April 1999 to February 2002

PALMPHIL GARMENTS PHILIPPINES CORPN.

San Pedro Laguna, Philippines

Electrician

■ Perform Preventive Maintenance of electrical equipments such as 3 units of 30 Tons Centralized AC, 440 Volts AC 14 Hp Boiler & Water Treatment using in Boiler Operations.

■ Responsible in safeguarding & troubleshooting of electrical installation Machines and likewise connected within facilities.

- Power Room, power panel board and stepdown

transformer.

- Repair defective, machine motor and controller for any Brand of sewing machine equipment.

- Responsible for the preventive maintenance and

check UPS system for computer operation in case of power failure breakdown.

- Lighting Emergency Power, Circuit Breaker, Fire

Alarm System, communication system like

Telephones, Intercom and others.

October 1990 to September 1998

LEE WON INDUSTRIAL CORPORATION.

Paranaque, Metro Manila, Philippines

Shift Supervisor / Technician

■ As Shift Supervisor /Technician, required to work on shift basis changing work hour every month.

■ Operation tending maintenance of any electrical equipments or take charge in any electrical wiring installation.

■ Repair/Troubleshoot of electrical controller, automatic transfer switch, control motor timer and other related works.

■ Perform preventive maintenance of electrical controller of the different equipments such as conveyor machine, extruder, take off machines, cutting machine, mixing compound machine, automatic printing machine, blower dryer and other equipment pertaining to the company.

■ Perform Installation and repair, troubleshooting of the following Electrical equipments, specially those directly involved in the Production equipments:

- AC/DC Motor

5 o f 6

- Electrical control such as motor timer, solenoid valve, - DC motor, speed controller.

- Defective electrical equipment such as auto conveyor, Extruder machine, take off machine, cutting machine, auto printing machine, mixing compound machine,

blower dryer.

■ Building and Residential Wiring/Telephone and Intercom Wiring Installation.

■ Check Electrical and Electronic Control like Temperature of Heater, Fan Motor, Air Blower and Thermocouple before operation of Extruder Machine

■ Repair and clean all electrical parts during no production operation to maintain good condition of machines and electrical equipments. November 1989 to April 1990

NOVELTY PHILS. INC.

Taguig, Metro Manila, Philippines

Electrician

Operation tending maintenance of electrical generating plant Employing voltage up to 700 volts or takes charge in any electrical Wiring, installation of utility equipment, Repair troubleshoot of Electrical controller such as WYE-DELTA magnetic starter, Pneumatic controller motor timer and Other related works.

■ Perform preventive maintenance of electrical controller of different equipment such as Giant Photo marker, Belt Conveyor machine, cutting machine, Lace winder, automatic transfer switch, washing machine, dryer and other equipments pertaining to the company.

■ Routine maintenance of electrical equipments and accessories during shutdown periods such as equipment may be stopped when the plant is operating.

■ Constant observation and inspection of electrical equipment in order to spot and repair trouble before it develops into a more extensive damage.

■ Maintenance of general lighting to keep the building and the yard in optimum illuminations.

■ Handling the rewinding of burned electrical motor.

■ Practice safety procedures at all times in undertaking the functions.

■ Tender Caterpillar Standby Generator Set, Model SR-4. 1800 RPM, 60 Hertz, 3Ø, 10 Wire. Standby Rating 3000 KVA, 2400 KW,8 PF 6 o f 6

PERSONAL INFORMATION

■ Birth Date November 7, 1965

■ Birth Place Magdalena Laguna, Philippines

■ Sex Male

■ Height 5’ 4”

■ Weight 120 Lbs.

■ Nationality Filipino

■ Belief Christian

■ Civil Status Married

■ Home Address Calamba City Laguna, Philippines 4100

■ Passport No. P3211524A

■ Date Expire 29 MAY 2022

REFERENCES

■ Furnished upon request.

“I certify that the above given information are TRUE and CORRECT to the best of my knowledge and capabilities.”

Ronelito Lopez

Applicant

Contact this candidate