Jekson B Manalu
Address: Dutamas Resident, Cluster Venezia Block D3 No.12 Batam Centre-Batam, Indonesia, 29463
Telephone: +62812-7609- 9360 (Indonesia), +971********* (Dubai)
E-mail: admi5a@r.postjobfree.com
Position Applied : QA/QC Welding & Piping Inspector / Supervisor/ Engineer / Coordinator
Availability : Immediately
Current Location : Batam-Indonesia
SUMMARY OF EXPERIENCE
More than 20 years experiences in areas of welding, structural, piping, pipeline, Tank and other related control inspections as well as supervisory, engineer and Inspector in the Oil & Gas (onshore and offshore facilities) and Ship building & repairs projects and Manufactures. Various exposures ranging from new constructions including Modules, Jetty, Rigs, Gas Utilities, Platforms, bridges, new building ships and maintenance repair ships.
PERSONAL DATA
• Date of Birth : September 6, 1976
• Nationality : Indonesia
• Marital Status: Married
• Passport No : C5368779
• Languages : English & Indonesian
COURSE AND CERTIFICATION :
CSWIP 3.2, TWI Senior Welding Inspector –GRADE 3, CERT No.69217/2 (UK-Registered)
CSWIP 3.1, TWI Welding Inspector –GRADE 2, CERT No.54213 (UK-Registered)
MIGAS Welding Inspector CWII by IKBAL M YOS, Cert No. 429/WI-XVII/III/2009
Radiographic Interpretation ASNT NDT Level II by DB School NDT, Cert No. RI-13314 (Reg.no.1361671)
Ultrasonic Test ASNT NDT Level II by DB School NDT, Cert No. UT-13960 (Reg.no.1393150)
Magnetic Test ASNT NDT level II by DB School NDT, Cert No. MT-13834 (Reg.no.1372067)
Penetrant Test ASNT NDT level II by DB School NDT, Cert No. PT-13834 (Reg.no.1372067)
BOSIET (Basic Offshore Safety Induction Emergency Training) By M&O GLOBAL, Cert No. 939257073108132611
CSWIP BIGAS Painting Inspector – GRADE 3/2, attendant
CQI & IRCA Certified ISO 9001:2015 Lead Auditor (Quality Management System), Cert No. NCI-P 124548
ACADEMIC ATTAINMENT :
-Bachelor of Sciences in Mechanical Engineering
-Master of Sciences in Management
GENERAL WORK SCOPE & RESPONSIBILITIES :
Perform site inspections to ensure the successful jobs including Material verification, Fit-up, Welding and testing during fabrication, Storage and Delivery.
•Responsible for completing the job scope safely and meeting all quality requirements as required by applicable codes, specifications, standards and client’s recommendations.
•Ensure Contractor compliance with requirements of Inspection Test Plans and work procedures.
•Ensure that all Company and local government Safety and Environmental regulations are followed.
•Work together with project QC personnel on fabrication quality issues as needed.
•Work with HSE Manager and/or HSE personnel to ensure all welding operations are carried out in a safe manner.
•Ensure PPE requirements are strictly enforced. Be an active participant in the safety program and achieving safety goals.
•Monitor status and quality of all welding items from delivery through fabrication and Installation.
•Ensure all welding examinations are conducted as required on fabrication drawings and per specification and code requirements.
•Ensure all procedure, isometric drawing, P&ID follow project requirement. All piping material such us pipe grade, flange, stud, nut and gasket is as per client requirement. Ensure installation and testing as per procedure and all activities is recorded
•Assist Contractor to ensure understanding / interpretation of job requirements, be pro-active and guide whenever needed to minimize rework.
•Actively participate to produce the Quality Surveillance Plan and execute the surveillances in accordance to the plan. Propose improvements and reporting through the correct surveillance report forms and log format.
•Monitor and inspect field construction activities on a day to day basis to ensure design requirements are met in compliance with drawings, specification, and applicable codes. Ensure adequate inspection is completed by the Contractor’s QC departments. Recommend and participate in resolution of corrective action and monitor completion of action for identified non-conformances and deficiencies.
•Bring observed non-conformances to the attention of the proper team member.
•Inspect and monitor on a day to day basis the welding preparation, during welding and after welding, also actively contribute on punch-out work for all welding process.
•Ensure daily inspection logs and documentation are properly performed and registered.
•Ensure data sheets are available and understood by operators.
•Establish and maintain communication and teamwork with other disciplines to insure overall successful completion.
EPLOYMENT HISTORY :
1.Orwell Offshore
Position : QA/QC Lead
Client/End Use : PINNACLE OIL AND GAS LIMITED
Contractor : Drydock World Dubai
Project : LEKKI FTZ OIL TERMINAL STORAGE FACILITY.
location : Dubai
Period : September 2020 to Present
Scope Jobs : Procurement Engineering and Fabrication of Single Point Mooring and PLEM for LEKKI FTZ OIL TERMINAL STORAGE FACILITY
Job Description :
To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities.
To carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices.
To treat all information obtained during course of the work with confidentiality.
To review and approved the Quality Documentation applicable to yard construction issued by the Contractor and Subcontractors.
To implement the QC activities based on the criticality assessment.
Coordinate the QC activities during construction at Contractor yard and during Offshore Hook-up.
Participate in the establishment and implementation of a suitable Audit Program to cover Contractor and Subcontractors yards main critical processes.
Manage all Company quality inspections related to material, welding, NDT and coating/painting activities.
Review and approved the material certificates.
Ensure that material, welding and NDT traceability system is maintained throughout the fabrication process.
Ensure that there is no backlog for inspection performance, reporting and data base update.
Review and approved the different inspection reports issued by the Contractor.
Witness inspection activities based on the Quality Control Plan (ITP).
Ensure that Contractor is performing dimensional control activity during fit-up of structural element and validate the dimensional control reports.
Ensure that construction verification activities by the Certifying Authority are in line with Contract requirement.
Issue Non-Conformance reports or review Contractor Non-Conformance reports and validate dispositions. Intervene as necessary where warranted.
Issue or participate in the issuance of CMS Deviation applicable to yard Quality Control Activity.
Be the leader in the implementation of the change management process (DEV/TQ/CON) at construction yard level.
Implement continual improvement processes, (Reporting, KPI, Lessons Learned, Close Out Report).
Participate in the weekly meeting and in the issuance of weekly report and KPIs.
In coordination with Head Projects QA/QC, participate in Contractor investigations of significant Quality failures. Ensure proper root cause analysis of Contractor Quality failures is undertaken, and conclusions are reached and corrective actions undertaken.
Review and validate manufacturing records books.
Attend project meeting
2.Qube International / BOMC
Position : Company Site Representative
Client/End Use : QATARGAS OPERATING COMPANY LTD
Contractor : Mc.Dermott. / SINGATAC ENGINEERING PTE LTD
Project : Nort Field Expansion (NFE) Project.
location : Bintan Island, Indonesia.
Period : April 2020 to July 2020
Scope Jobs : Procurement Engineering and Fabrication of Transportation Frame of Jacket, Pile, Boat Landing and Temporary Drill Deck.
Job Description :
Ensuring yard’s safety is adequate and satisfactorily adhered to (via co-operation with project HSE Manager on procedures review and audit needs)
Review about the fabrication quality plan, work instruction as used for Project.
Receipt, handling and storage of supplies material at the fabrication yard.
Tracking of fabrication progress, initiates any remedial actions to ensure schedule is kept.
Control of costs related to yard’s work and any subcontractors engaged locally.
Monitors all substructure fabrication.
Lead and organize the welding inspector to perform daily inspection activity as per approved welding procedures, Quality Control procedures, NDE procedures, Codes; standards are available at work site.
Follow-up with regulatory body with respect to pressure vessel, crane and other related issues.
Accepting and closing out outstanding punch list items.
Review and approve all inspection report and MDR.
Engaging suitable resources to successfully accomplish all fabrication and Inspection of structure.
3.Chevron
Position : QA/QC Engineer
Client/End Use : CHEVRON NIGERIA NIGERIA LIMITED
Contractor : Fenog Nigeria Limited.
Project : 2 Unit Single Point Mooring (SPM) for Escravos CHEVRON NIGERIA.
location : Warri-Delta State, Nigeria.
Period : February 2019 to March 2020
Scope Jobs : Procurement Engineering and Fabrication of Single Point Mooring and PLEM for Escravos Facility. ( Structural, piping and E&I)
Job Description :
Review the procedure, structural drawing, isometric drawing and P&ID
Review about the quality plan, work instruction as used for Project
Lead and organize the welding inspector to perform daily inspection activity
Check & ensure that end preparation prior to welding as per approved welding procedures, Quality Control procedures, NDE procedures, Codes; standards are available at work site.
Review the application of WPS in site base on type material, thickness, diameter and another essential variable
Ensure that all material, fabrication and installation are in accordance with drawings and specifications.
Perform Receiving material, Fit-up inspection, dimensional inspection, Visual Inspection and review radiograph film.
Witness NDE, bolt tightening, flushing, hydrotest activity.
Monitors fabrication activities in the field and ensure project is executed within schedule time and budget.
Coordinated with yard personnel to resolve any construction problem.
Review and approve all inspection report and MDR.
Attend project meeting.
4.Orwell Offshore
Position : Senior QA/QC Engineer
Client/End Use : PERTAMINA and CHEVRON NIGERIA
Contractor : NOV-PROFAB.
Project : 1 Unit Single Point Mooring (SPM) for Balongan Project, 2 Unit for Escravos CHEVRON NIGERIA.
location : Batam, Indonesia and Warri, Nigeria.
Period : July 2017 to January 2019
Scope Jobs : Procurement Engineering and Fabrication of Single Point Mooring and PLEM for Balongan Refinery and Escravos Facility.
Job Description :
Review the procedure, structural drawing, isometric drawing and P&ID
Review about the quality plan, work instruction as used for Project
Lead and organize the welding inspector to perform daily inspection activity
Check & ensure that end preparation prior to welding as per approved welding procedures, Quality Control procedures, NDE procedures, Codes; standards are available at work site.
Review the application of WPS in site base on type material, thickness, diameter and another essential variable
Ensure that all material, fabrication and installation are in accordance with drawings and specifications.
Perform Receiving material, Fit-up inspection, dimensional inspection, Visual Inspection and review radiograph film.
Witness NDE, bolt tightening, flushing, hydrotest activity.
Monitors fabrication activities in the field and ensure project is executed within schedule time and budget.
Coordinated with yard personnel to resolve any construction problem.
Review and approve all inspection report and MDR.
Attend project meeting.
5.ENI Muara Bakau B&V
Position : Senior Mechanical and Piping Inspector
Client/End Use : ENI Muara Bakau B&V.
Contractor : SAIPEM Indonesia and STJO Consortium.
Project : FPU JANGKRIK COMPLEX Project.
location : Karimun and Kalimantan, Indonesia
Period : September 2016 to June 2017.
Scope Jobs : Engineering Procurement Fabrication and Installation of Floating Process Unit (FPU) include top side Module, and FPU hull.
Job Description :
Responsible for verification and witness of all mechanical works in accordance with established procedures and ITP's at different stages of the project execution.
Monitor the mechanical works for conformance with the provisions of the Contract Documents and the Procedures manual.
Coordinate and supervise the work of all mechanical activities.
Assist with the final inspection of mechanical work.
Monitor final completion of the work.
Performs other responsibilities associated with this position as may be appropriate.
Discuss disapproved items with architects, engineers, contractors to obtain plan changes necessary for approval.
Prepare inspection reports.
6.Sapura Acergy
Position : QC Site Representative
Client/End Use : TOTAL MYANMAR.
Contractor : Singatac
Project : Badamyar Project
location : Bintan, Indonesia
Period : February 2016 to September 2016.
Scope Jobs : Engineering Procurement Fabrication LCP Top side Module’s Spreader Bar
Job Description :
To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities.
To carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices.
To treat all information obtained during course of the work with confidentiality.
Witness inspection activities based on the Quality Control Plan (ITP).
Perform all COMPANY quality inspections related to welding activity.
Ensure that Contractor’s personnel are qualified for the task they’ve been assigned to.
Ensure that material traceability system is maintained throughout the fabrication process
Review and endorse Contractor quality inspections related to welding and material traceability on a daily basis.
Follow-up the Construction Contractor activities and ensure the contract requirements are applied.
Monitor welding consumables management by Contractor including consumable test report.
Witness welding procedures qualification, welder ability qualifications and production tests.
Participate in the issuance or resolution of Non Conformance reports.
Follow up the welding activities and ensure proper records are maintained (welding/NDE/inspection records follow-up).
Review manufacturing records books.
Attend project meeting
7.TOTAL
Position : Project Quality Coordinator
Client/End Use: TOTAL B&V.
Contractor : PTSC-MC
Project : Maharaja Lela South
location : Vung Tau - Vietnam
Period : December 2014 to December 2015
Scope Jobs : Engineering Procurement Fabrication and Installation jacket and topside module.
Job Description :
To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities.
To carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices.
To treat all information obtained during course of the work with confidentiality.
To review and approved the Quality Documentation applicable to yard construction issued by the Contractor and Subcontractors.
To implement the QC activities based on the criticality assessment.
Coordinate the QC activities during construction at Contractor yard and during Offshore Hook-up.
Participate in the establishment and implementation of a suitable Audit Program to cover Contractor and Subcontractors yards main critical processes.
Manage all Company quality inspections related to material, welding, NDT and coating/painting activities.
Review and approved the material certificates.
Ensure that material, welding and NDT traceability system is maintained throughout the fabrication process.
Ensure that there is no backlog for inspection performance, reporting and data base update.
Review and approved the different inspection reports issued by the Contractor.
Witness inspection activities based on the Quality Control Plan (ITP).
Ensure that Contractor is performing dimensional control activity during fit-up of structural element and validate the dimensional control reports.
Ensure that construction verification activities by the Certifying Authority are in line with Contract requirement.
Issue Non-Conformance reports or review Contractor Non-Conformance reports and validate dispositions. Intervene as necessary where warranted.
Issue or participate in the issuance of CMS Deviation applicable to yard Quality Control Activity.
Be the leader in the implementation of the change management process (DEV/TQ/CON) at construction yard level.
Implement continual improvement processes, (Reporting, KPI, Lessons Learned, Close Out Report).
Participate in the weekly meeting and in the issuance of weekly report and KPIs.
In coordination with Head Projects QA/QC, participate in Contractor investigations of significant Quality failures. Ensure proper root cause analysis of Contractor Quality failures is undertaken, and conclusions are reached and corrective actions undertaken.
Review and validate manufacturing records books.
Attend project meeting
8.Subsea 7
Position : QC Site Representative
Client/End Use : Conoco Philips.
Contractor : Profab
Project : Banyu Undan Phase
location : Batam
Period : October 2014 to December 2014
Scope Jobs : Engineering Procurement Fabrication and Installation dewatering manifold. And FLEET.
Job Description :
To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities.
To carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices.
To treat all information obtained during course of the work with confidentiality.
Witness inspection activities based on the Quality Control Plan (ITP).
Perform all COMPANY quality inspections related to welding activity.
Ensure that Contractor’s personnel are qualified for the task they’ve been assigned to.
Ensure that material traceability system is maintained throughout the fabrication process
Review and endorse Contractor quality inspections related to welding and material traceability on a daily basis.
Follow-up the Construction Contractor activities and ensure the contract requirements are applied.
Monitor welding consumables management by Contractor including consumable test report.
Witness welding procedures qualification, welder ability qualifications and production tests.
Participate in the issuance or resolution of Non Conformance reports.
Follow up the welding activities and ensure proper records are maintained (welding/NDE/inspection records follow-up).
Review manufacturing records books.
Attend project meeting
9.Sapura Acergy
Position : QC Site Representative
Client/End Use : Herema Marine.
Contractor : Singatac Offshore Centre
Vessel : Myclin 3317
Project : Boyancy Tank Sea fastening
Location : Bintan
Period : August 2014 to October 2014
Scope Jobs : Engineering Procurement Fabrication and Installation Sea fastening for Wheatstone Buoyancy Tank.
Job Description :
To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities.
To carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices.
To treat all information obtained during course of the work with confidentiality.
Witness inspection activities based on the Quality Control Plan (ITP).
Perform all COMPANY quality inspections related to welding activity.
Ensure that Contractor’s personnel are qualified for the task they’ve been assigned to.
Ensure that material traceability system is maintained throughout the fabrication process
Review and endorse Contractor quality inspections related to welding and material traceability on a daily basis.
Follow-up the Construction Contractor activities and ensure the contract requirements are applied.
Monitor welding consumables management by Contractor including consumable test report.
Witness welding procedures qualification, welder ability qualifications and production tests.
Participate in the issuance or resolution of Non Conformance reports.
Follow up the welding activities and ensure proper records are maintained (welding/NDE/inspection records follow-up).
Review manufacturing records books.
Attend project meeting
10.EMAS AMC
Position : QA/QC Offshore Supervisor
Client/End Use : Husky Oil Chine Ltd.
Contractor : Saipem Portugal
Vessel : Lewek Centurion
Project : LIWAN 3-1 Area facilities Development Project
Location : South China Sea
Period : May 2014 to August 2014
Scope Jobs : Installation pipe line, wellhead platform, topside including pipe end terminal (PLET’s) and lifting support spool. Material CS and Cladding Pipe.
Job Description :
Ensure all on board QA/QC activities in accordance with approved ITP,
Monitored & witnessed daily overall inspection status progress report.
Updated and submit daily, weekly and monthly report to QA/QC Manger.
Coordinate with welding, NDE and coating team for QA/QC Issue.
Maintain all instruments list and calibration records on board, keep track repair rate and consumable.
Attend project meeting.
11.PRETROLEO BRASILIERO SA – PETROBRAS
Position : Senior Welding Inspector
Client/End Use : PRETROLEO BRASILIERO SA - PETROBRAS.
Contractor : Saipem SA
Vessel : SAIPEM FDS
Project : P55 SCR – MODULE 3 RONCADOR FIELD
Location : Northern area of Campos Basin (Brazil offshore)
Period : November 2013 to April 2014
Scope Jobs : Pipe Line for Depth Water, Material CS and CRA
Job Description :
Record and witnessed receiving material WPQT against mill certificate.
Record Electrode receiving and monitoring of handling and storage of the electrode as per specification and procedure.
Checking Matrix welder qualification. Checking and monitoring all preparation (Fit-Up) include U bevel for Automatic Welding before welding and keep monitoring on during process welding.
Monitoring all welding stage and record the actual welding parameter in according to WPS.
Doing Visual Inspection as per applicable spec
12.HANSA ENGINEERING
Position : Welding Engineer
Client/End Use : GE Oil and Gas Singapore.
Fabrication : HANSA ENGINEERING
Project : Ophir Gabon
Period : August 2013 to November 2013
Scope Jobs : Welding Butt joint drilling pipe for Depth Water, Material CS and Cladding Pipe
Job Description :
Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering
principles:
Conducts research and development investigations to develop and test new fabrication processes and procedures,
Improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures,
Discover new patterns of welding phenomena, or to correlate and substantiate hypotheses.
Prepares technical reports as result of research and development and preventive maintenance investigations.
13.INWHA
Position : QA/QC Coordinator
Client/End Use : Exxon Mobil Ltd.
Fabrication : INWHA -Indonesia
Project : Banyu Urip Project –Indonesia
Period : February 2013 to August 2013
Scope Jobs : Piping and Storage Tank fabrication and installation for EPC1 Production Processing Facilities, Material CS and CRA.
Job Description :
To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities.
To carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices.
To treat all information obtained during course of the work with confidentiality.
To review and approved the Quality Documentation applicable to yard construction issued by the Contractor and Subcontractors.
To implement the QC activities based on the criticality assessment.
Coordinate the QC activities during construction at Contractor yard and during Offshore Hook-up.
Participate in the establishment and implementation of a suitable Audit Program to cover Contractor and Subcontractors yards main critical processes.
Manage all Company quality inspections related to material, welding, NDT and coating/painting activities.
Review and approved the material certificates.
Ensure that material, welding and NDT traceability system is maintained throughout the fabrication process.
Ensure that there is no backlog for inspection performance, reporting and data base update.
Review and approved the different inspection reports issued by the Contractor.
Witness inspection activities based on the Quality Control Plan (ITP).
Ensure that Contractor is performing dimensional control activity during fit-up of structural element and validate the dimensional control reports.
Ensure that construction verification activities by the Certifying Authority are in line with Contract requirement.
Issue Non-Conformance reports or review Contractor Non-Conformance reports and validate dispositions. Intervene as necessary where warranted.
Issue or participate in the issuance of CMS Deviation applicable to yard Quality Control Activity.
Be the leader in the implementation of the change management process (DEV/TQ/CON) at construction yard level.
Implement continual improvement processes, (Reporting, KPI, Lessons Learned, Close Out Report).
Participate in the weekly meeting and in the issuance of weekly report and KPIs.
In coordination with Head Projects QA/QC, participate in Contractor investigations of significant Quality failures. Ensure proper root cause analysis of Contractor Quality failures is undertaken, and conclusions are reached and corrective actions undertaken.
Review and validate manufacturing records books.
Attend project meeting
14.Bechtel Corporation
Position : Field Welding Engineer.
Client/End Use : Conoco Philips
Fabrication : Bechtel Corporation – Batam -Indonesia
Project : Module Yard AP LNG Project, Australia
Period : August 2012 to February 2013
Scope Jobs : Piping Module LNG Facilities Curtis Island, Material CS and CRA
Job Description :
Review about the quality plan,client spec, code, work instruction as used for Project
Ensured effectiveness and timely execution of the activities defined in the project inspection and test plan.
Check & ensure that end preparation prior to welding as per approved welding procedures, Quality Control
procedures, NDE procedures, Codes; standards are available at work site.
Check that all applicable equipment’s related to welding are calibrated and has valid certification.
Check & ensure that welding processes in the work station are carried out in accordance with approved
procedures, specification & Inspection and confirmation of welding consumables as per the specifications.
Ensuring that Fabrication Operations are monitored to ensure compliance with specified and approved
measures.
Witnessed welding activities, NDE activities, Leak and Hydro test.
Verified the base materials and consumable welding materials and conformed Welding activities.
Verified the welding equipment capability to meet the applicable requirements of the welding procedure.
Verified welder’s qualification record.
Performed the required visual examinations, before welding, during welding, after welding.
Supervised performing Repair of welds those are defective.
Carried out external visual and NDE inspection surveys of piping and structural as per Inspection program.
15.Hanjung Indonesia
Position : QC Welding Coordinator
Client/End Use : Chevron /KJV
Fabrication : PT.Hanjung Indonesia-Bandar Lampung-Indonesia
Project : Gorgon LNG plant Project – Fabricate Structural Jetty Facilities
Period : March 2011 to August 2013
Job Description :
To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities.
To carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices.
To treat all information obtained during course of the work with confidentiality.
To review and approved the Quality Documentation applicable to yard construction issued by the Contractor and Subcontractors.
To implement the QC activities based on the criticality assessment.
Coordinate the QC activities during construction at Contractor yard and during Offshore Hook-up.
Participate in the establishment and implementation of a suitable Audit Program to cover Contractor and Subcontractors yards main critical processes.
Manage all Company quality inspections related to material, welding, NDT and coating/painting activities.
Review and approved the material certificates.
Ensure that material, welding and NDT traceability system is maintained throughout the fabrication process.
Ensure that there is no backlog for inspection performance, reporting and data base update.
Review and approved the different inspection reports issued by the Contractor.
Witness inspection activities based on the