Vishal Bhardwaj,

Village+Post Office Maniyala,

Tech. Dehra Disst. Kangra,

H.P. - 177108

Cell No 91-81263586

E-mail: Vishal _ admax0@r.postjobfree.com

admax0@r.postjobfree.com

Dear Sir/Madam,

I am working as Assist Manager - development Centre Kangaro Group of Industries. (Kangaro tools Ltd.)

I am looking for regular position in Tool Room/ Tooling Development / Tool Manufacturing and Precision Section, PPC, OUT SOURCE Department My latest resume is enclosed herewith for your kind consideration.

I am Mechanical Engineer & have 14 years’ experience in Tool Room / Tool Manufacturing, Tool Development and Knowledge of CAD & CAM. Software use for UG (NX-6 & NX7.5) & Mould Wizard Flow 3D Version 10.1 & CAM Software use UG (NX-6 & NX7.5), Del CAM, FF CAM & ELCAM, CAD MACRO

Form Control (Bloom) Software Use for Checking the 3d Profile of VMC Finishing Job

I have in depth experience of Tool Manufacturing, Tool Assembly Press tool, mould, Jig and fixture, HPDC die casting,LPDC,GDC Die casting, Q.C, T.P.M, to meet the requirement of TS16949,ISO 9001 Revision2015 and EMS14001 have supervised & responsible for Development Centre (Tool Room). At shop floor and at supplier end for Components .I have good communication skills and a through knowledge of applicable engineering, manufacturing & Design & Dev standards of most of the automotive companies.

I look forward to hearing from you at your earliest convenience.

Vishal bhardwaj

VISHAL BHARDWAJ Email admax0@r.postjobfree.com

Mobile: 91-812******* admax0@r.postjobfree.com

Job Prospective

Seeking managerial assignment in TOOL MANUFACTURING and TOOL ROOM In charge (CAD & CAM) with a reputed growing Organization

Professional Profile

. Total 14 year Experience.

. 3.9 year experience in Tool Room In charge, Tool Manufacturing Including Tool Assembly, General Machining and Precision section (CNC) Plastic Component, Sheet metal Component,

Aluminum Component and Blister Forming Dies. Sealing Dies

. 1.5 year experience in Development and Design Eng. (Foundry Casting) Manufacturing Industries

. 8 year experience in Tool Room In charge Assembly Section. (H.P.D.Casting & L.P.D.C & G.D.C)

2 Year Experience in (CAD& CAM) Eng. Manufacturing Industries.

. 3D modeling Software use for UG (NX-6 & NX7.5)

. 2D drg. Draw for Software use for Auto- cad . VMC M/C for Programming Manual & CAM Software use for UG (NX-6 & NX7.5), FF CAM,

DEL.CAM & Wire cut Programming Software use for ELCAM, and CAD MACRO & E.D.M

. Conversant with implementation and documentation for Design and Development and techniques

Including ISO 9001, ISO TS, T.Q.M, T.P.M, APQP, PPAP etc.

. An effective communicator with interpersonal skills.Having strong analytical problem solving and

Organizational abitites.Possess a flexible and detail oriented attitude.

Current Organizational Experience

. Since April” 17 working with Kangaro Tools LTD (Ludhiana, Punjab.) as Assist. Manager.

(Development Centre). Kangaro Tools Ltd. Manufacturing capabilities include Aluminum Castings, Plastic Component, and Sheet metal Component. Blister forming dies

Key functional Area

• Planning for all Assembly Section and General Machining (35 M/c), Precision Section Machine Wire cut machines 9, VMC 6 Machine and EDM 3 Machine. Total Machine-18

• Tool Room, Precision Section (CNC Section) Weekly/monthly Utilization and OEE Calculated and Data Maintain

After the First Trail die Moulds, Press tools and Blister Dies Modification as per plan

Rejection Control Our Dep’t due to Programming and Process Variation, Operator, Drawing etc.

• KRA/KPI and Objective Update Monthly and MIS Report Submit to Plant Head.

• Training given to programmer for Reduce the Programming time and EDM Stock Decrease

Process Improvement and add New Tooling (introduce and Innovation.)

To Tanning given the Supervisor for add the new Technology and Problem Solving method.

Previous Organizational Experience

. Since JAN” 16 to March’’17 working with Continental Engines Limited (Bhiwadi, Raj.) as Junior

Manager. (Design & Development). Continental Engines LTD is Baxy Group Company

Continental Engines LTD manufacturing capabilities include Aluminum Castings, Complex

Machining Manufacturing for component in Cyl Head

Key functional Area

• Tool Manufacturing and Assembly DIE & Core box (LPDC & GDC) OK in First Trail.

After the First Trail die & core box Correction point Implement the 3d model & 2d drg.

Rejection Control Due to die & core box

•Tool manufacturing in out sauce plan LPDC & GDC Die and Core Box,

• All LPDC, GDC Tool Manufacturing as per target date

Previous Organizational Experience

. Since June” 2009 to Dec’’2015 working with Rockman Ind. Limited (Hardware, UTH.KD) as Tool Room Senior Eng. And (CAD&CAM). Rockman is HERO Moto Group Company

Rockman manufacturing capabilities include Iron and Aluminum Castings, Complex Machining

Manufacturing for all component Hero Moto (HPDC, LPDS, GDC) & Mahindra & Mahindra

Previous Key functional Area

• Tool Manufacturing of Core box and All Insert (HPDC & LPDC & GDC) by using CAM Software UG (NX-6 & NX7.5) and Manual programming in V.M.C & E.D.M (Makino)

• Planning of outsource work as per target date

planning of in house Manufacturing. Work to achieve the target on time

T.P.M Implements in TOOL ROOM & Design section.

• lead the Tool Assemble section Tool Assembly as per plan

• Help the Tooling extraction with the help of 3D model

Last Employment

Organization Duration Position

3. RockMan Ind.LTD (Haridwar). June 2009 TO JAN.2016 (Sr. Eng. Tool Room)

Organization Duration Position

2. Amtek India LTD (Bhiwadi). NOV 2007 TO JUNE. 2009 (CAD&CAM Eng.)

Organization Duration Position

1. RockMan Ind.LTD (Ludhiana). SEP 2004 TO OCT. 2007 (Asst. Eng.CAM)

Development of the components according to the specification given by the customer, which includes-

Making of the die as per drawing given by the customer.

Dimensional checking of the die.

Job Responsibility for the machine section

6 VMC M/C for the manual and CAM programming (software use for U.G)

3 VMC – Control use for FANUC (AGMA & HARD FORD M/C name)

3 VMC- Control use for HIDNA (DECKAL MAHO)

3 WIRE CUT M/C for the Programming- CONTROL use for FANUC

3 E.D.M M/C

Convocational M/C section (LATHE, MILLING, SHAPER, GRINDING DRILLING& another tool

Room)

Maintaining 5S, TPM .

Quality Control:

• System Implementation Adherence (ISO-9001, EMS 14001).

• PCS and Control Plan Change for the the Requirement of the customer.

• Q.C MADE Every Two month and two kaizen implement ever month

• Ever items for the Trail Sheet Preparing.

• Gold Awards in Q.C.F.I Kanpur (2012) & Second Position Award in CII Chapter in

Haridwar (2013) .

ACADEMIC CREDIENTIAL

Matriculation 1999 Mark Obtained: 67%

10+2 2001 Mark Obtained: 55% (Private Pass

Techicnal Qualification

THREE YEAR DIPLOMA IN MECH. ENGG. IN(2000- 2003)

AUTO-CAD 2004,U.G.(NX3) .MASTER CAM (1 YEAR COURASE)2004

B.E IN MECH. ENGG. IN 2011 ( I.M.E ) Indian Instute of ENG. STUDIES (Corresponding ) Private PASS

Personal details

Permanent address:

S/O SHRI HANSRAJ

VPO MANIYALA

TEH. DEHRA

DISTT KANGARA (H.P.)-177108

PHONE 812-***-**** (019**-******

Declaration

I here by declare that the above information furnished by me in true to the best of my knowledge.

Place:

Signature:

Date:

Contact this candidate