Snr. Pdms/E3d Piping Designer

Location:

Kajang, Selangor, Malaysia

Salary:

95/hr

Posted:

June 18, 2021

Contact this candidate

Resume:

POSITION : SNR. PDMS/E*D PIPING DESIGNER

NAME : MOHD DAHARI BIN SABARI

B.O.D : 20.07.1979

NATIONALITY : MALAYSIAN

MARITAL STATUS : MARRIED

HIGHER EDUCATION : Kolej Komuniti YPJ

AND QUALIFICATIONS Certificate CADD (UTM)

AVEVA Certificate of Training

LANGUAGES (SPOKEN/WRITTEN) : MALAY, ENGLISH

SOFTWARE/SKILLS : • Windows, Ms Office (Word, Excel, and Power Point)

• AutoCAD 2008, 2010 and 2013

• Plan Design Management System (PDMS) and Multi Discipline Support

(MDS)

• LFM (Point Cloud/Laser Scan)

• Navisworks

• PDMS Review

• Planview LeanKit

• Aveva E3D

CONTAC NO. /EMAIL : 011-****-****/ ********@*****.*** AREAS OF EXPERTISE : • Conceptual Studies

• Detailed Design

• FEED- Front End Engineering Design

• EPCIC- Engineering, Procurement, Construction, Installation and Commissioning

• EPCC- Engineering, Procurement, Construction and Commissioning

• FPSO

• EPCm- Engineering, Procurement, Construction Management

• Greenfield

• Brownfield

SUMMARY EXPERIENCE

Sixteen (17) years experiences in Onshore/Offshore/FPSO/PowerPlant work. Experience includes PDMS Design/Drafting of Piping, Mechanical and FEED/shop drawings for detail design/fabrication work include PDMS Admin. Completely familiar with various commercial computer software’s such as Windows system Microsoft Office, AutoCAD, 3D Laser Scanning LFM Software (LFM-Light Form Modeler) and competent with 3D model using software AVEVA PDMS/E3D. Experience/exposure attained through working with reputable oil & gas and power plant consultant and fabricators with major clients such as Sarawak Shell Berhad (SSB), IOI Group, Petronas Carigali Sdn. Bhd. (PCSB), Newfield Peninsula Malaysia Inc., Kebabangan Petroleum Operating Company Sdn. Bhd., MURPHY

(Sarawak Oil. Co. Ltd), SembCorp Cogen Pte. Ltd., IOI Group, Electricity Generating Authority of Thailand (EGAT), Malaysia Marine and Heavy Engineering (MHHE), Lundin Malaysia B.V. (LUNDIN), ExxonMobil Exploration and Production Malaysia Inc., SBN Industries Sdn. Bhd., SAPURAKENCANA ENERGY SARAWAK INC. and PETROBRAS. DETAILED WORKING EXPERIENCE

FEB 2019 – PRESENT: Aker Engineering International Sdn Bhd Position : Senior Designer II – Piping Layout (E3D) Project : PETROBRAS FPSO ANITA GARIBALDI MV33 (MARLIM 1) Client : PETROBRAS

Scope of work

> Model all hook-up and continuation lines from/to marine from/to topside guided by Tie-in List provided by marine team for reference and determine the location of support and clash free.

> Responsible for modeling the Fire Water System (fire water, fire hydrant and foam) for three modules. This includes deluge for all equipment and cargo oil tanks area.

> Responsible mark-up P&ID

> Preparing isometric for stress calculation, support team and iso issuance. APR 2019 – JAN 2021: SBM Offshore Malaysia Sdn. Bhd. Position : SNR. PDMS PIPING DESIGNER

Project : FPSO MERO 2

Client : PETROBRAS

Scope of work

> Assign to HP Separation Module team.

> Responsible for the complete PDMS piping design of a project.

> P&ID mark up for official documentation.

> Preparing Vessel Cleat GA using PDMS Draft.

> Preparing isometric for stress calculation, support team and iso issuance.

> Isometric Coordinator – To manage deliverable of isometric as per schedule. 3

Position : SNR. PDMS PIPING DESIGNER

: ISOMETRIC/MANAGEMENT OF CHANGE (MOC)/HOLD COORDINATOR Project : LIZA UNITY – FPSO ECPI

Client : ESSO E&P GUYANA Ltd (ExxonMobil)

Scope of work

SNR. PDMS PIPING DESIGNER

> Assign to Oil Separation Module team.

> Responsible for the complete PDMS piping design of a project.

> P&ID mark up for official documentation.

> Preparing Vessel Cleat GA using PDMS Draft.

> Preparing isometric for stress calculation, support team and iso issuance. ISOMETRIC/MANAGEMENT OF CHANGE (MOC)/HOLD COORDINATOR

> Coordinate with Module Lead to monitor deliverable of isometric as per schedule.

> Preparing weekly PDMS Piping/Equipment/Pipe Support Status Report (graph and percentage) to management team.

> Review/Identify potential/require MOC receive by piping team or from inter discipline.

> Prepare MOC form and submit to Piping MOC Engineer (MOC champion) for preparation of Assessment Card in Leankit Software.

> Populate all field in MOC form from Leankit Software.

> To monitor/make sure all Approved MOC to be implement.

> Prepare Isometric Hold List to manage hold issue (MOC) for communication with yard. OCT 2017 – MAR 2019 : WOOD GROUP ENGINEERING SDN. BHD. Position : SNR. PDMS PIPING DESIGNER/CHECKER

Project : GuDX PIPING, VESSEL, VALVE, STRUCTURAL AND CONSTRUCTION SUPPORT

(BROWNFIELD)

- GUNTONG ’D’-COMPRESSION

- GUNTONG ‘D’-PRODUCTION

- GUNTONG ‘E’

- GUNTONG ‘C’

: SATELLITES TURNAROUND –SATURN (BROWNFIELD)

-TABU ‘A’

-TABU ‘B’

Client : ExxonMobil Exploration and Production Malaysia Inc. 4

Scope of work (Checker)

> Checking from ICR (Issued Client Review) up to IFC piping isometric drawing against latest MFD’s (Mechanical Flow Diagram) with the aid of LMF (Point Cloud), Navisworks, PDMS model, incorporate vendor data/drawings and quality check.

> Perform checking of complex facilities. Work with Piping Design Coordinator and responsible designer in correcting drawings

> Support fabricator and installation contractor in the construction and installation facilities. Project : EMEPMI BROWNFIELD PROJECT

-TAPIS ‘D’ PIPING REPAIR

-GUNTONG ‘C’ PIPING REPAIR

-TABU ‘B’ PIPING REPAIR

Client : ExxonMobil Exploration and Production Malaysia Inc. Scope of work (Designer)

> Checking all clients’ conceptual design drawings included Equipment layout, General Arrangements, Piping plan and P&ID.

> Study on the equipment layout drawing base on conceptual design drawing and test vendor data information. This study shall be included for maintenance purposes, instrument items requirement, piping stressed/routed, accessibility and future connections.

> Determine every single line which is new, demolish and modification based on P&ID with a predetermined tie-in point limits defect mark-up as specified by the engineer at offshore.

> Modeling pipe routing as per P&ID tie-in point limits defect specified by engineer. At the same time using laser scanning point cloud (LFM software) to avoid clash and as per original routing including pipe support location.

> Modeling pipe support using LOFT.

> Pipe support Repair and provide Support Detail.

> Model piping and support refer from point cloud.

> Piping Repair and provide isometric drawing.

> Preparing isometric drawing (demolition and modification) and pipe support detail for construction purposes.

> Preparing Isometric Drawing Index, Tie-in Index and Support Index

> Run clash report to ensure the modeled are clash free with other discipline.

> Red line mark-up on the P&ID.

> Attend PDMS Review meeting with client.

JUN 2017 – OCT 2017 : WOOD GROUP ENGINEERING SDN. BHD (SECONDED TO KEMAMAN SUPPLY BASE (KSB)) Position : SNR. PDMS PIPING DESIGNER/ASSIST’N BAG AND TAG SUPERVISOR Project : EMEPMI PROJECT

-GUNTONG ‘A’ -METERING (PALAS ‘A’, IRONG BARAT ‘A’, PALAS ‘A’)

-GUNTONG ‘C’ -SEMANGKOK ‘A’

-GUNTONG ‘D’ -LARUT ‘A’

-GUNTONG ‘E’ -IRONG BARAT ‘A’

-IRONG BARAT ‘A’ (FREE FLOW)

Client : ExxonMobil Exploration and Production Malaysia Inc. Scope of work

> Received Work Pack complete with MTO from CPE for documentation and reference.

> Work Pack is distributed to the Sapura Pine well MC staff to check availability, shorting components and provide Bag and Tag for offshore shipping purposes during shut down.

> Supervise Sapura Pine well MC personnel while preparing Bag and Tag.

> Preparing daily bag and tag progress report and planning next boat for offshore shipping purposes for every platform and send report to WG Yard Lead for overall report purpose. Overall report will send to WG project top management and Client.

> Assist and advice production team to interpret isometric drawing such as ARF, OPCR etc. for fabrication purpose.

> Do filing COG for reference purpose.

JAN 2017 – JUN 2017 : WOOD GROUP ENGINEERING SDN. BHD Position : SNR. PDMS PIPING DESIGNER

Project : EMEPMI BROWNFIELD PROJECT

-PALAS ‘A’ PIPING REPAIR

-GUNTONG ‘A’ PIPING REPAIR

-GUNTONG ‘B’ PIPING REPAIR

Client : ExxonMobil Exploration and Production Malaysia Inc. Scope of work

> Checking all clients’ conceptual design drawings included Equipment layout, General Arrangements, Piping plan and P&ID.

> Determine every single line which is new, demolish and modification based on P&ID with a predetermined tie-in point limits defect mark-up as specified by the engineer at offshore. 6

> Modeling pipe support using LOFT.

> Pipe support Repair and provide Support Detail.

> Model piping and support refer from point cloud.

> Piping Repair and provide isometric drawing.

> Preparing isometric drawing (demolition and modification) and pipe support detail for construction purposes.

> Preparing Isometric Drawing Index, Tie-in Index and Support Index

> Run clash report to ensure the modeled are clash free with other discipline.

> Red line mark-up on the P&ID.

> Attend PDMS Review meeting with client.

NOV 2016 - JAN 2017 : NAIM ENGINEERING SDN. BHD.

Position : SENIOR DRAFTER

Project : PROJECT MASS RAPID TRANSIT LEMBAH KELANG- JAJARAN SUNGAI BULOH - KAJANG

Client : MASS RAPID TRANSIT CORPORATION SDN. BHD.

Scope of work

> Preparing, checking and updating Architecture shop drawing for construction as per IFC drawing.

> Updating Architecture shop drawing for construction as site comment.

> Visiting site to ensure all site comment already installed as per shop drawing.

> Converting all architecture shop drawing to As-Built as final doc. FEB 2016 - SEP 2016 : SAPURA KENCANA PETROLEUM SDN. BHD. Position : SNR. PDMS PIPING DESIGNER

Project : SK310 B15 DEVELOPMENT PROJECT

Client : SAPURAKENCANA ENERGY SARAWAK INC.

Scope of work

> Preparing, checking and updating the catalogues and specifications in PDMS model accordance with standard specification.

> Catalogue and Specification Addition/Modification.

> Creating .rvm and .rvs file for Design Review.

> Updating Skey’s, Comp. & Mat'l Descriptions at PDMS Paragon. 7

> Preparing iso’s option/backing sheet (title block) for ISO’s and G.A’s as per SPKHL standard and client approval.

> Performing a clash check after project 3D model received from client.

> Checking a consistency for all pipes that has been modeled.

> Preparing and checking of overall model, Equipment layout, Piping Plan drawings and Pipe Supports.

> Resolving all the clashes prior to issuance of IFC drawings.

> Preparing fabrications isometrics, piping and equipment layout, pipe support details and G.A drawings.

> Using Spooler module to produce isometrics.

> Modeling all the new equipment as provided by mechanical disciplines and incorporating all the vendor data given.

> Modeling and detailing of pipe supports by using MDS (Multi-Discipline support).

> Preparing and routing small bore pipes as per P&ID and site requirements.

> Coordination with other disciplines in conjunction with clash checking or other new interfacing activities.

> Liaise closely with piping engineer and others to ensure all executed works have been done.

> Assist and provide technical support to project team and subcontractor. APR 2015 - APR 2016 : WOOD GROUP ENGINEERING SDN. BHD Position : SNR. PDMS PIPING DESIGNER/PDMS ADMINISTRATOR Project : P-123 OFFSHORE EXECUTION FOR TAPIS B BROWNFIELD PROJECT Client : ExxonMobil Exploration and Production Malaysia Inc. Scope of work

> Checking all clients’ conceptual design drawings included Equipment layout, General Arrangements, Piping plan and P&ID.

> Determine every single line which is new, demolish, combine phase, phase 3 and modification

> Modeling equipment and pipe routing as per equipment layout, latest vendor data received and piping plan conceptual design drawing.

> Preparing isometric drawing included proposed pipe support location and issued for stress analysis team.

> Preparing isometric drawing as per piping specification and issued for material take-off (MTO) team.

> Preparing, checking, producing and issuing Isometric drawing using ISODRAFT in the PDMS.

> Modeling pipe routing as per client drawings (conceptual design).

> Run clash report to ensure the modeled are clash free with other discipline.

> Red line mark-up on the P&ID, equipment layout and piping plan. 8

> Preparing, checking and updating the catalogues and specifications in PDMS model accordance with standard specification.

> Preparing iso’s option/backing sheet (title block) for ISO’s and G.A’s as per WOOD GROUP MUSTANG standard and client approval.

> Performing a clash check after project 3D model received from client.

> Creating User Defined Attributes (UDA) to suit with requirement.

> Preparing and checking piping Bill of Material (MTO). Keeping track of changes due to revisions.

> Preparing and checking Bolt MTO. Keeping track of change due to revisions.

> Perform System and software troubleshooting.

> Catalogue and Specification Addition/Modification.

> Creating .rvm and .rvs File For Design Review.

> Updating Skey’s, Comp. & Mat'l Descriptions at PDMS Paragon.

> Check & Incorporate Engineer/Designer Iso's Comment for isometric production.

> Generate Spec Check Report for Catalog and Spec Internal Check. JAN 2015 - MAR 2015 : ARMADA DINAMIK RESOURCES SDN. BHD. Position : SNR. PDMS PIPING DESIGNER /COORDINATOR

Project : CATALOG AND SPECIFICATION DEVELOPMENT

Client : SBN Industries Sdn. Bhd.

Scope of work

> Attending meetings and discussions on issues related to technical requirements and data needed to catalog and specification development.

> Liaise closely with PDMS admin to ensure the necessary client’s data is accurate.

> Checking output PDMS catalog and specification

> Submit a document for review, comment and approval from clients. OCT 2014 - JAN 2015 : MALAYSIA MARINE AND HEAVY ENGINEERING SDN. BHD. Position : PDMS PIPING DESIGNER

Project : TLP MALIKAI DEEPWATER PROJECT

Client : SABAH SHELL PETROLEUM COMPANY Ltd.

Scope of work

> Preparing, updating and extract pipe support detail form pdms draft for construction purpose

> Checking pocket, high point and low point every pipes line via PDMS model.

> Preparing piping hydrotest mark-up for pdms hydrotest diagram team.

> Checking consistency between hydrotest markup and hydrotest diagram.

> Liaise closely with PMT for hydrotest package documentation. MAR 2014 - OCT 2014 : TABUNG HAJI HEAVE ENGINEERING SDN. BHD. Position : PDMS PIPING DESIGNER

Project : BLOCK PM 307 BERTAM FIELD DEVELOPMENT PROJECT Client : LUNDIN MALAYSIA B.V. (LUNDIN) AND PETRONAS CARIGALI SDN. BHD. Scope of work

> Preparing, checking and updating the catalogues and specifications in PDMS model accordance with standard specification.

> Catalogue and Specification Addition/Modification.

> Creating .rvm and .rvs file for Design Review.

> Updating Skey’s, Comp. & Mat'l Descriptions at PDMS Paragon.

> Preparing iso’s option/backing sheet (title block) for ISO’s and G.A’s as per THHE standard and client approval.

> Performing a clash check after project 3D model received from client.

> Checking a consistency for all pipes that has been modeled.

> Preparing and checking of overall model, Equipment layout, Piping Plan drawings and Pipe Supports.

> Resolving all the clashes prior to issuance of IFC drawings.

> Preparing fabrications isometrics, piping and equipment layout, pipe support details and G.A drawings.

> Modeling of cable trays, HVAC & tertiary structures if there any requirement from other respective disciplines.

> Modeling all the new equipment as provided by mechanical disciplines and incorporating all the vendor data given.

> Modeling and detailing of pipe supports by using MDS (Multi-Discipline support).

> Preparing and routing small bore pipes as per P&ID and site requirements.

> Coordination with other disciplines in conjunction with clash checking or other new interfacing activities.

> Liaise closely with piping engineer and others to ensure all executed works have been done.

> Assist and provide technical support to project team and subcontractor.

> Extracting As-Built drawings for final documentation. 10

JUN 2013 – FAB 2014 : ALSTOM ASIA PASIFIC SDN. BHD. Position : PDMS PIPING DESIGNER

Project : NORTH BANGKOK POWER PLANT BLOCKS 2 DEVELOPMENT PROJECT Client : ELECTRICITY GENERATING AUTHORITY OF THILAND Scope of work

> Study the general arrangement site layout drawing to understand the actual layout site for every plant Arrangements, Piping plan and P&ID.

> Modeling equipment, civil structure and pipe routing as per equipment layout, latest vendor data received and piping plan conceptual design drawing.

> Preparing isometric drawing included proposed pipe support location and issued for stress analysis team.

> Preparing isometric drawing as per piping specification and issued for material take- off (MTO) team.

> Design pipe support by using LISEGA.

> Preparing piping plan drawing (including dimensioning, equipment items labeling and instrument items labeling) as per PDMS modeled using Draft database.

> Preparing, checking, producing and issuing Isometric drawing using ISODRAFT in the PDMS.

> Modeling pipe routing as per client drawings (conceptual design).

> Modeling underground (buried or in trenches) pipe routing such as process waste, spillage, reclaimable hydrocarbons, sanitary and storm water, firewater and drinking water system.

> Run clash report to ensure the modeled are clash free with other discipline.

> Red line mark-up on the P&ID, equipment layout and piping plan.

> Issued equipment layout, piping plan, and isometric drawing for AFC. APR 2013 – MAY 2013 : ARMADA TPCE SDN. BHD.

Position : PDMS ADMINISTRATOR

Project : CENTRAL DIYARBEKIR DRILLING PLATFORM A (CDDP-A) Client : PETRONAS CARIGALI (TURKMENISTAN) SDN BHD

Scope of work

> Preparing, checking and updating the catalogues and specifications in PDMS model accordance with standard specification

> Preparing iso’s option/backing sheet (title block) for ISO’s and G.A’s as per MMC standard and client approval.

> Performing a clash check after project 3D model received from client.

> Importing 3D structural model from BOCAD to PDMS. 11

> Creating User Defined Attributes (UDA) to suit with requirement.

> Preparing and checking piping Bill of Material (MTO). Keeping track of changes due to revisions.

> Preparing and checking Bolt MTO. Keeping track of change due to revisions.

> Perform System and software troubleshooting.

> Catalogue and Specification Addition/Modification.

> Creating .rvm and .rvs File For Design Review.

> Updating Skey’s, Comp. & Mat'l Descriptions at PDMS Paragon.

> Check & Incorporate Engineer/Designer Iso's Comment For Isometric Production.

> Create new MDB, create new user and Setup new Database for all discipline in PDMS Admin Module

> Generate Spec Check Report for Catalog and Spec Internal Check. FAB 2012 – MAR 2013 : MMC OIL & GAS ENGINEERING SDN. BHD. Position : MDS PDMS DESIGNER

Project : PROVISION OF DETAILED FOR ANGSI FACILITIES UPGRADING PROJECT – BOOSTER COMPRESSION MODULE

Client : PETRONAS CARIGALI SDN. BHD.

Scope of work

> PDMS MDS pipe support modeling based on pipe support standards.

> Prepare Pipe Support Standard GA using PDMS Draft Module. Position : PDMS ADMINISTRATOR

Project : FRONT END ENGINEERING & DESIGN FOR BELUM TOPSIDE FACILITY Client : MURPHY (Sarawak Oil. Co.Ltd)

Scope of work

> Preparing, checking and updating the catalogues and specifications in PDMS model accordance with standard specification.

> Preparing iso’s option/backing sheet (title block) for ISO’s and G.A’s as per MMC standard and client approval.

> Performing a clash check after project 3D model received from client.

> Importing 3D structural model from BOCAD to PDMS.

> Creating User Defined Attributes (UDA) to suit with MMC requirement.

> Preparing and checking piping Bill of Material (MTO). Keeping track of changes due to revisions.

> Preparing and checking Bolt MTO. Keeping track of change due to revisions. 12

> Perform System and software troubleshooting.

> Catalogue and Specification Addition/Modification.

> Creating .rvm and .rvs File For Design Review.

> Updating Skey’s, Comp. & Mat'l Descriptions at PDMS Paragon.

> Check & Incorporate Engineer/Designer Iso's Comment For Isometric Production.

> Create new MDB, new user and setup new Database for all discipline in PDMS Admin Module.

> Generate Spec Check Report for Catalog and Spec Internal Check. Position : PDMS ADMINISTRATOR

Project : PROVISION OF FRONT END ENGINEERING PROVISION OF FRONT END ENGINEERING DESIGN SERVICES FOR DALAK PIPELINE PROJECT

Client : PETRONAS CARIGALI SDN. BHD.

Scope of work

> Preparing, checking and updating the catalogues and specifications in PDMS model accordance with standard specification.

> Preparing iso’s option/backing sheet (title block) for ISO’s and G.A’s as per MMC standard and client approval.

> Performing a clash check after project 3D model received from client.

> Importing 3D structural model from BOCAD to PDMS.

> Creating User Defined Attributes (UDA) to suit with MMC requirement.

> Preparing and checking piping Bill of Material (MTO). Keeping track of changes due to revisions.

> Preparing and checking Bolt MTO. Keeping track of change due to revisions.

> Perform System and software troubleshooting.

> Catalogue and Specification Addition/Modification.

> Creating .rvm and .rvs File For Design Review.

> Updating Skey’s, Comp. & Mat'l Descriptions at PDMS Paragon.

> Check & Incorporate Engineer/Designer Iso's Comment For Isometric Production.

> Create new MDB, new user and Setup new Database for all discipline in PDMS Admin Module.

> Generate Spec Check Report for Catalog and Spec Internal Check. 13

Position : PDMS ADMINISTRATOR

Project : BORF CENTRIFUGAL COMPRESSOR PROJECT

Client : MURPHY (Sarawak Oil. Co. Ltd)/PETRONAS CARIGALI SDN. BHD. Scope of work

> Preparing, checking and updating the catalogues and specifications in PDMS model accordance with standard specification.

> Preparing iso’s option/backing sheet (title block) for ISO’s and G.A’s as per MMC standard and client approval.

> Performing a clash check after project 3D model received from client.

> Importing 3D structural model from BOCAD to PDMS.

> Creating User Defined Attributes (UDA) to suit with MMC requirement.

> Preparing and checking piping Bill of Material (MTO). Keeping track of changes due to revisions.

> Preparing and checking Bolt MTO. Keeping track of change due to revisions.

> Perform System and software troubleshooting.

> Catalogue and Specification Addition/Modification.

> Creating .rvm and .rvs File For Design Review.

> Updating Skey’s, Comp. & Mat'l Descriptions at PDMS Paragon.

> Check & Incorporate Engineer/Designer Iso's Comment For Isometric Production.

> Create new MDB, new user and Setup new Database for all discipline in PDMS Admin Module

> Generate Spec Check Report for Catalog and Spec Internal Check. JULY 2011 – FAB 2012 : SECONDED TO ALSTOM ASIA PASIFIC SDN. BHD. Position : PDMS PIPING DESIGNER

Project : DEVELOPMENT OF A COMBINED CYCLE PLANT PROJECT SEMBCOGEN CCP3 @ BANYAN Client : SEMBCORP COGEN PTE. LTD., SINGAPORE

Scope of work

> Study the general arrangement site layout drawing to understand the actual layout site for every plant Arrangements, Piping plan and P&ID.

> Modeling equipment, civil structure and pipe routing as per equipment layout, latest vendor data received and piping plan conceptual design drawing.

> Preparing isometric drawing included proposed pipe support location and issued for stress analysis team.

> Preparing isometric drawing as per piping specification and issued for material take- off (MTO) team. 14

> Design pipe support by using LISEGA.

> Preparing piping plan drawing (including dimensioning, equipment items labeling and instrument items labeling) as per PDMS modeled using Draft database.

> Preparing, checking, producing and issuing Isometric drawing using ISODRAFT in the PDMS.

> Modeling pipe routing as per client drawings (conceptual design).

> Modeling underground (buried or in trenches) pipe routing such as process waste, spillage, reclaimable hydrocarbons, sanitary and storm water, firewater and drinking water system.

> Run clash report to ensure the modeled are clash free with other discipline.

> Red line mark-up on the P&ID, equipment layout and piping plan.

> Issued equipment layout, piping plan, and isometric drawing for AFC. MAY 2010 - JUNE 2011 : SECONDED TO AKER SOLUTIONS SDN. BHD. Position : PDMS PIPING DESIGNER

Project : KBB NORTHERN HUB PROJECT

Client : KEBABANGAN PETROLEUM OPERATING COMPANY SDN. BHD. Scope of work

> Checking all clients’ conceptual design drawings included Equipment layout, General Arrangements, Piping plan and P&ID.

> Modeling equipment and pipe routing as per equipment layout, latest vendor data received and piping plan conceptual design drawing.

> Preparing isometric drawing included proposed pipe support location and issued for stress analysis team.

> Preparing isometric drawing as per piping specification and issued for material take-off (MTO) team.

> Design pipe support by using MDS (Multi-Discipline support)

> Preparing piping plan drawing (including dimensioning, equipment items labeling and instrument items labeling) as per PDMS modeled using Draft database.

> Preparing, checking, producing and issuing Isometric drawing using ISODRAFT in the PDMS.

> Modeling pipe routing as per client drawings (conceptual design).

> Run clash report to ensure the modeled are clash free with other discipline.

> Red line mark-up on the P&ID, equipment layout and piping plan.

> Issued equipment layout, piping plan, and isometric drawing for IDC, IFR and AFC. 15

JAN 2010 - MAY 2010 : AKER SOLUTIONS SDN. BHD.

Position : PDMS PIPING DESIGNER

Project : PM329 EAST PIATU DEVELOPMENT PROJECT (FAST TRACK PORJECT) Client : NEWFIELD PENINSULA MALAYSIA INC.