You are viewing Mostafa CV

Mostafa Fathy Aly Ahmed

Education: -

-B.sc Degree in Mechanical Production Engineering, Faculty of Engineering, Alexandria University. June 2007.

Welding inspection certifications

Certified level two as per the requirement of American society for non-destructive testing (ASNT) recommended practice no.SNT-TC-1A at

Visual and remote inspection VT

Radiographic testing and film interpretation RT

Ultrasonic Testing UT

magnetic particles inspection MT

Dye penetrant testing pt

Radiation Health and Safety course

CWI

Certified welding inspector certificate (CWI) certificate number: 16071901 Safety certificate

IASP certificate

Attendance courses

Level 3 basic preparation course

Level 3 RT preparation course

API 570 piping inspection (in-service)

API 650 storage tank construction

ASME B31.3 process piping

Excellent Computer Skills (Win OS- Microsoft Office Full Package- Internet- Primavera 3-AutoCad). Contact Information »

Resident Home Address Alexandria, Egypt.

- Cell phone: 002-****-**** 506 (Mob.)

- E-Mail: adm46n@r.postjobfree.com

Computer skills:

Languages Skills:

Arabic English

Fluent Very Good

You are viewing Mostafa CV

Personal Information:

Birth date: 22

th

of feb 1984

Gender: Male

Marital Status: single

Military Status: Exempted

Nationality: Egyptian

work experience

-From April 2017 Till April 2021

Maire Tecnimont S.P.A .: Senior mechanical quality control/quality assurance and welding inspector engineer.

Job Description:

The main responsibility is for all quality activities related to the construction of site assembled storage tank

(utility, process and ammonia storage tank) and static equipment delivered from vendors also follow piping

(approximately 450K inches), perform material inspection upon received at site, Review quality document and procedures of subcontractor, Witness and review welding and welding operators qualification(PQR,WPS and WPQ) test, witness and perform the NDT activities, interpreter for radiographic films, In-process welding surveillance during welding to verify compliance with specified procedure including any preheat, interposes temperature control and post heat requirements, Post welds visual inspection and dimensional check of completed element against specification, code requirements and drawings, review the test package documents and perform walk-down

Project- Ammonia and Urea Fertilizer Plant. (Aswan)-turn key An EPCC (Engineering-Procurement-Construction-Commissioning) Contract on lump-sum turnkey basis for the realization of a new Fertilizers Complex The overall project value is approximately 540 million USD.

- One Ammonia production unit of 1,200 ton/day capacity, implementing the KBR “Purifier” technology.

- One Urea melt production unit of 1,575 ton/day capacity, implementing the “Pool Reactor” technology of Stamicarbon.

- One Urea granulation unit of 1,575 ton/day capacity, implementing the urea granulation technology of Stamicarbon.

- All the necessary Utilities & Off-site facilities to support the process units. Location: Aswan, Egypt

Owner: Egyptian Chemical & Fertilizers Industries – KIMA Consultant/ Owner Rep.: Ennpi

Main Contractor: Maire Tecnimont

Sub – Contractor: Orascom Construction Industries

You are viewing Mostafa CV

-From April 2016 Till April 2017

western desert operating petroleum company (wepco) : Team leader QC/QA engineer. Job Description:

Participate at HAZOP study, Review and approval for all subcontractor quality control documents in accordance with project specification codes, material inspection at vendors sites, attend PQRs /WPQ and review documents, witness for all the inspection done by subcontractor and its lower subcontractor for NDT services, In-process welding surveillance during welding to verify compliance with specified procedure, Perform and check post weld dimension, alignment check for the completed parts before, radiographic film interpretation, review the test package documents and perform walk-down, witness the hydrostatic test. Project- Badr -1 extension and El hamra tank maintenance

-Extension for the production Oil& Gas plant for badr concession at western desert by adding gas compressors with its related piping connected to the existing plant piping, upgrading all the plant firefighting system, construction of two crude oil storage tank each is 15000 BBL.

-Floating roof maintenance (inspection and replacement for the defected areas) for one crude oil storage tank with a capacity of 500,000 BBL at EL hamra terminal port. Location: Western Desert and EL hamra port, Alamein, Egypt Consultant/owner rep: western desert operating petroleum company Wepco. Engineering company: Ennpi and onspec Tawakol co.. Main Contractor: Alexandria petroleum Maintenance Company (petromaint)

-From Jan 2015 Till March 2016

KAR group CO.–Erbil, Kurdistan Iraq : mechanical QA/QC welding inspector engineer. Job Description:

QA/QC team leader for the erection of storage tanks farm, review and approval of subcontractor quality document as per project specification and standard, managing a group of inspector witness for the welding and welder qualification, inspection for the material received at site, witness NDT and dimensions check, Post welds visual inspection and dimensional check of completed element against specification, code requirements and drawings, review the test package documents and perform walk-down Project- Erbil refinery extension phase 3

A new extension for the refinery with a capacity of 40,000 BPD include process, utilities and storage tank farms for the process and storage.

The tank farm includes a 29-storage tank with different capacities (17 tank single deck floating roof and 12 fixed roof tank). The sum

Location: Erbil, Iraq

Owner: KAR Group

Engineering contractor: Ventic,USA

Main Contractor: Silver tecknic company, Turkish

You are viewing Mostafa CV

-From August 2012 Till December 2014

Alexandria petroleum Maintenance Company (petromaint ): QA/QC site manager Job Description:

Participate with the engineering company to identifies Tie-inn location, Prepare the quality control documents, procedures and all the welding and welder qualification, perform PQRs and welder’s qualification, material inspection at vendors sites, material fabrication inspection, follow and perform the required NDT and dimension inspection during construction, perform surveillance for the welding and erection activities, Post welds visual inspection and dimensional check of completed element against specification, code requirements and drawings, prepare the hydrostatic test pack, Project- Egyptian Linear Alkyl Benzene (ELAB) EXTENSION Project- turn key An extension for the Egyptian linear alkyl benzene Co. for increases the storage capacity of the existing plant by building a four storage tanks (5000m3 jet tank,2*3500m3 paraffin tank,2500m3 benzol tank), two vessels, pipe-rakes, piping network and interconnecting piping (20,000 inch). Location: Alexandria, Egypt

Owner: Egyptian Linear Alkyl Benzene (Elab)

Consultant: Engineering Consultants Group (ECG)

Main Contractors: Petromaint

-From January 2010 till august 2012

Quality control Egypt Company [NDT service company] : QC engineer and welding inspector. Job Description:

Working as QC engineer and NDT inspector owner representative at different onshore and offshore sites, review and approve contractor and subcontractor quality documents, material delivery inspection, witness NDT done by contractor and sub-contractors, radiographic film interpretation, witness the hydrostatic test. Project- offshore line pipe laying 10, 12 inches at red sea Belayim marine field Petrobel Two offshore pipelines laying connecting wells to offshore platform 12 and 12 inch with a length of 6 kilometers each.

Location: Gulf of suze, Red sea, Egypt

Owner: Petrobel

Consultant: Germanischer Lloyd,

Main Contractor: Petoleum marin service co. PMS

Project- storage tank fabrication and construction for Khalda petroleum company for EL salam field Fabrication and assembly of twenty-one 21 crude oil storage tanks each is 1000 BBL at Alexandria petroleum maintenance co. at the main workshop, reviews for all quality document (PQR, WPS, NDT procedures, inspection and test plan ITP, PWHT procedures) before fabrication start, received material inspection, witness the NDT and hydrostatic test

Location: Petromaint workshop, Alexandria

Owner: Khalda petroleum company (Apache partner)

Engineering: Peromaint

Main Contractor: Petomaint workshop

Project- fabrication for khalabsha plant oil facility for khalda petroleum company You are viewing Mostafa CV

Monitoring and witness all the project material fabrication( piping fabrication, storage tank plates fabrication and steel structure fabrication) at petrojet workshop before released for shipment to the site, review and approve quality documents, attend PQRs and review/approve the WPSs, review and approve NDT procedures, witness and approve NDT done, document and final inspection before materials released for shipment.

Location: Petrojet workshop, Alexandria

Owner: Khalda petroleum company (Apachi corporation partner) Main contractor: Petrofac.

Sub-contractor: Petrojet

-From july 2009 To December 2009

Mega Construction industries CO. : QC welding inspector. Job Description:

Control and the inspection of piping fit-up as per approved drawing and with approved WPS, monitoring preheat and PWHT, surveillance during welding, performing finial visual inspection, perform all required NDT as per approved ITP and specification, perform punch list before hydrostatic test of piping loops, prepare hydrostatic test package, check the hydrotest limits, witness hydrostatic test. Project- at Sidi Krir power plant (750 mv)

Sidi Krir power project consists of two 250 MW combustion turbine generators (CTGs). Each one feeds exhaust gases to its respective unfired heat recovery steam generator (HRSG). Steam from the two HRSGs is fed to one 250 MW, single reheat, condensing Steam Turbine Generator (STG). The company scope of work is mechanical scope, Equipment installation, Large bore piping works carbon/stainless and alloy steel, support fabrication/erection and welding, chemical cleaning, flushing, insulation, steam blowing include erection & commissioning and start up support Location: Alexandria, Egypt

Owner: Western delta for Electricity Production Company Consultant: PEGASCO (power generation engineering and service company) Contractor: Toshiba Tsusho Corporation

Sub-contractor: Mega construction industries

-From august 2008 To June 2009

Port said engineering works CO. : QC welding inspector. Job Description:

Control and the inspection for the plates fit-up as per approved drawing and with approved WPS, surveillance during welding, performing finial visual and dimension check, perform all required NDT as per approved ITP and specification, radiographic film interpretation, prepare hydrostatic test package, witness hydrostatic test.

Project- at EL Tebbin thermal power plant 2X350 MW the project is including a 2x350 MW thermal power plant. two identical cycle turbine generator units, each with a nominal rated capacity of 350 MW. The units running either by natural gas, residual (mazout) oil, or a combination of both

You are viewing Mostafa CV

The company scope of work is including the design, procurement and construction of the storage tanks Two mazout tank each is 15000 M3

Two demineralized water tank each 1000 m3, one solar tank 2000 m3 and one filter water tank 1000 m3 Location: Cairo, Egypt

Owner: Cairo Electricity Production Company

Consultant: PEGASCO (power generation engineering and service company) Contractor: Port said engineering works

-From august 2007 To august 2008

Comibassal International controller and inspection services: welding inspector. Job Description:

Perform all the nondestructive testing for piping, tanks and pressure vessels, radiographic film interpretation, perform the destructive test with reports, witness the hydrostatic test for equipment, pipeline or pressure vessels,

Location: Alexandria, Egypt

Owner: Different clients at Oil & Gas sector

Contractor: Comibassal

Contact this candidate