Career Objective :

Seeking a challenging and satisfying career which will utilize my professional skills and give a creative opportunity to utilize the best out of my knowledge and also develop my professional and technical knowledge.

EDUCATIONAL QUALIFICATION

BACHELOR OF TECHNOLOGY (MECHANICAL ENGINEERING) 64.42%

Rajasthan Technical University KOTA (2017)

GOVERNMENT ENGINEERING COLLEGE JHALAWAL

HIGHER SECONDARY (RBSE) Rajasthan (2012) 71.20%

SECONDARY (RBSE) Rajasthan (2010) 78.33%

WORK EXPERINCE

VEDANTA ( Cairn )Oil and Gas at Barmer through Aarvi Encon Ltd

Utility ( Boiler,,Steam Turbine, Compressor,

Effluent Treatment plant, RO & DM Plant )

Plant Duration :- July 2017 to till working

Experience : - 4 year

Work role:- Utility Engineer

Boiler Details 115T/hr

Boiler Reg. No : RJ-1637-38-48-49-50-2003-2004 :

Boiler Type : Water Tube, Gas fired Boiler. 115 TPH (115 tph 7 units)

Boiler Make : Thermax Babcock & Wilcox LTD. Pune

Boiler Max Continuous Rate : 115TPH

Rated Super Heated Steam Pres. : 42 Kg/sq.cm

Rated Sup. Heated Steam Temp. : 370•C

Heating Surface Area : 4839 m Sq

Cold Start up, Hot Start-up, Warm start up, Normal Operation, Emergency Handling and Safe shut down of Units.

Line up of the unit and its auxiliaries, Change-over of equipments, routine testing of protection system.

Operation of boiler & its process interlocks.

TURBINE

Steam Turbine : multi-stage,Impulse Condensing Turbine(12 mw 5 units)

Turbine Make : Triveni engineering & industries LTD.

Operation of Turbine & its process interlocks.

Steam turbines single and multistage Condensing, and Back pressures steam turbines Capacity 12 MW with different types of Governing system (Make:Triveni steam turbine with Gear box&Alternater)

Electrical Output :- 5x12 MW

COMPRESSORS

Atlas air compressor with Refrigerant air dryer Screw compressor air cooled type chiller Air handling unit Chilled water pump Process Pump R.O 1000LPH

Axial flow centrifugal compressors

Oil Injected Screw Compressors (Make:, Atlas capco)

Atlas copco air compressor dessicant drayer PSA make nitrogen generator IR nitrogen compressor and nitrogen generator

Booster nitrogen generator unit at 40 bar

RO and DM plant

Operation of plant process equipments like ACF,UF, RO,MB, Raw water filters,etc, analysis of their technical problems and their rectification.

Working on XSV, Flow control valves, Ball valves,PCV,pneumatic valve etc.

Knowledge about Mixbed(MB) Regeneration process like backwash injection and air mixing process.

Checking the chemical injection pumps and calibrate as per control room record.

Familiar to Open backwash and close backwash of ACF and Raw Water Filter

Familiar remove choking in membrane by CIP process

Preferring to compete with myself, striving towards better ways of doing things.

ETP (Effuent Treatment plant)

Capacity of Etp plant - 2 x130 m^hr

Operation of plant equipment like Centifuge,Dryer, Surge vessal, Oil removal system, DNF system of plant.

Involve other plant activity like oil skimming and diesel unloading, housekeeping.

Maintain the log sheet and logbook as routine activity

Knowledge about different types of strainer like conical type strainer, T- type Strainer,Y-type strainer etc

Willing to take responsibility.

Shutdown planning to repair and maintain potential critical processes which might cause emergency shutdowns, breakdowns or process efficiencies

PUMPS

Single and Multistage centrifugal pumps with different material of construction.

Positive displacement pumps(plunger, and Diaphragm pumps)

High pressure Boiler feed water pumps ( steam driven)and

Axial flow propeller pumps, Vertical turbine type pumps

Operating Pumps (all types centrifugal pumps and positive displacement pumps)

Experience in controlling and monitoring production parameters.

SKILLSETS:

Adjust the LIT,PIT,TIT and FIT setting points as per control room instructions .Control room record.

Looking for Operation of Boiler &. Turbine

Monitoring of running Turbine parameters & Auxiliaries

Support commissioning and optimization of new and modified plant.

Routine check up of all process parameters & equipment.

Maintaining smooth & production operation and safe working procedure in the plant

Controlling & maintaining process parameter as per technical specification.

Wearing appropriate safety PPE in designated safety areas

Reporting all the abnormalities and failure to the responsible department and to take corrective measure

Shutdown planning to repair and maintain potential critical processes which might cause emergencyshutdowns,breakdowns or processe fficiencies

Participating in mock drills and attending debriefing sessions.

Team leader, trainer and a motivator with well honed analytical and troubleshooting skills; exceptional talent for problem solving and ability to handle multiple functions and activities in high pressure environments with tight deadlines

Extra-CurricularActivities

Active Participate in Hydrogen Sulfide(H2S)SafetyTraining.

Active Participate in Work at Height Training.

Active Participate in SCBA ( self-contained breathing apparatus )Safety Training.

Participate in Confined Space Training.

Participate in Fire Fighting Training

Participate in vertigo and acrophobia Training.

Participate in RED ZONE Training.

JOBRESPONSIBILITIS

Operation and trouble shooting of Boiler, STG, Air Compressor, EDG and Fire pump.

Routine check up of all process equipment

Time to time training given to all junior as well as PTW, fire and chemical handling.

Looking plant routine and schedule activity as well as weekly trials of EDG, fire water pump and all pump schedule changeover.

Rich exposure across Operation, preventive maintenance, Trouble shooting, Start-up & Shutdown of Utility equipment, Air Compressor, process pump,

Deft in monitoring machine performance to deliver products of desired quality

Maintenance & Operating of All Utility equipment.

Troubleshooting of the process operations during power failure,Instrument Air failure Utility failure.

Pertaining to Safe Operations of the Unit & operating the equipments as per standard operating procedure(SOP)

Co-ordinate with the technical and maintenance service department to solve the problems.

KEY TASKS HANDLED:

Site Inspections & Security:

Knowledge of PTW (Work permits for Cold work, Hot work)

Identify, prepare and apply process isolations(LOTO).

Conducting authorized gas testing.

Production:

Developed production plans & schedules, arranged for resources to ensure achievement of organizational targets as per budgeted parameters.

Optimized the production process to improve yield and established guidelines of the sequence of manufacturing activities on the shopfloor.

Man-power Management

Planned effective manpower deployment & works scheduling of qualified workforce; addressingtrainingneedsofstafftoenhanceskillsandproductivity.

Supervised workmen on the Shop floor to ensure quality control of products manufactured

An effective communicator & team leader with skills in troubleshooting,team building capability & abilities in planning &managing resources.

TRAININGDETAILS

Undergone in Plant Training in KALISINDH THERMAL POWER PLANT, JHALAWAR for 60DAYS

1200 MW (600*2) two units of 600 MW each.

COMPUTER SKILLS

Basic Computer

Microsoft Office

Rajasthan knowledge Computer Learning (RKCL)

FIRE & SAFETY

Knowledge of fire & Safety procedure.

Familiar with personal protective equipment, escape mask& breathing apparatus.

Familiar with operation of fire extinguishers like foam, DCP,CO2 etc.

PROJECT DETAIL WIND TURBINE

PERSONAL PROFILE REFERENCE PERSON

Father’s Name: Mr.Gouri Shanker Bhargav

Date of birth:14-09-1993

Gender:Male

Marital Status : Married

Nationality:Indian

Language known : English, Hindi.

Declaration:

I hereby declare that the above furnished information is true to the best of my knowledge and belief.

Place: Manish Bhargav

Contact this candidate