Last Name: Agbara Current Position: Snr. Project Engineer/Company Site Rep.

First Name: Chibueze Jonah Country of Residence: Nigeria

Marital Status: Married Number of children: Four (4)

State of Origin: Rivers Local Government Area: Obio/Akpor

Language: English Sex: Male

Qualifications

Registered Member with Society for Underwater Technology (SUT) 2010 till date

Registered Member with Pipeline Professionals’ Association of Nigeria (PLAN). 2006 till date

Certified NDT Level II with American Society for Non-Destructive Testing in Magnetic Particle Testing

Certified Protective Coating Inspector Level 1 - The Society for Protective Coatings SSPC -2011

UFR & OLT Subsea Structural Design Technology with CSL, Aberdeen & MCS, Galway -2009

Rivers State Polytechnic Bori, Nigeria - HND Mechanical Engineering. 1997 - 2002

Vantage Plant Design (Plant Design and Management System-PDMS) – Equipment Modelling and Piping Design- AVEVA. UK. 2007

National Business and Technical Certificate Examination 1996 Session

Govt. Technical College PHC. Federal Craft Certificate in Mechanical Engineering Practice.1989 - 1996

Trade Test 1, 2, and 3 Certificate in Mechanical Engineering Practice (General Fitting and Turning). Nigeria.

Community Primary School, Elelenwo, Rivers State. First School Leaving Certificate - 1983 -1988

Valid BOSIET, Valid DPR Offshore Safety Permit, and Valid NIMASA Medical Fitness Certificate

Expertise

Core Mechanical and Subsea Structural Engineering,

Oil and gas Production/Facilities engineering systems covering

oSubsea/Offshore Project Management, Design, Installation, construction and operations

oSubsea Inspection, Repair and Maintenance engineering

oInstallation Analysis and Offshore/Onshore Methodology & Procedures,

oOffshore Field and Interface Engineering

oSubsea Flowline/Pipeline Design Analysis

oField Pre-commission and commissioning of Production system, HSE, HSEQ

Additionally versed in

HAZID & HAZOP of Risk Assessment, Conceptual, Front End Engineering, Detail Design phase, Inspection for integrity checks and Operations

Background

Over seventeen (17) years experience in the field of Oil & Gas Structural Engineering Design, Construction & Installation, operations, Inspection Analysis, Offshore/Onshore Field activities, Pre-Commissioning, NDT, Certification, in Oil & Gas Deep water, swamp and land Projects in Nigeria.

Software Skills/Others:

Proficient in the use of TEKLA, OrcaFlex, Auto-PIPE, ABAQUS, GeoUTM, MathCAD, SAGE

FLEXCOM, Microsoft Office, VBA, Auto-CAD, DnV FatFREE

Structural verification and Protective Coating Inspection Capability

Non -Destructive Test (NDT) Capability & Interpretation of P&IDs and PFDs

Use of Codes &Standards –DNV, ASME, API, BS, ISO,ASNT and TOTAL and SNEPCo general specifications

Team player with excellent organization, presentation, communication, and leadersship skills.

An experienced, diligent and meticulous engineer with knowledge of Design, construction, installation Analysis, inspection/verification and Exploration & Production.

Working Experience

Position –Snr. Project Engineer/Company Site Rep. (Offshore Maintenance activities with DSV2 Vessel- Picasso)

Company: Miden Systems Limited Freelance (Picasso -DP2 Vessel- 200 POB)

5th June 2019 – Till date (Project: Subsea Diving Maintenance/Integrity Checks - SCiN/SPDC Offshore Location)

Plan, define the project based on milestone, manage and strategies in a safe, timely and ethical manner

Prepare and distribute Daily Progress Reports (DPR) as required.

Ensure the Daily Progress Reports are signed by all required parties

Responsible for daily work site permitting with FPSO.

Coordinate Offshore execution of Asset Integrity, maintenance of Platform, SPM, FPSO, Spools, pipelines, Risers and Clamps

Responsible for maintaining up-to-date records of asset integrity information in designated System of Record.

Coordinate Offshore execution of Subsea Intervention activities, removal and replacement of platform boat landing, spool installation, Tanker rail inspection, mooring hawser change out and floating hose inspection

Review and understand Execution procedures, Risk assessments and HES documents as required before job execution and keep updated on changes in the documents.

Attend daily meetings, toolbox talks and other discussions to ensure that the works are being carried out in a safe manner to the required quality.

Be present as witness during inspections, installations, work executions and all defined key activities.

Participate in safety inspections with HSE representatives from the Client and contractor organizations.

Ensures compliance with local & international regulations.

Coordination of logistical support for helicopter/supply vessel/personnel movements.

Other support services per company request

Position -Project Manager (Offshore activities with DP2 Vessel- Maniviki Rover)

Company: Petrostuff Nigeria Limited (PNL)- Freelance (MVRover -DP2 Vessel)

4th May 2015 – 25th May 2019 (Project: IRM –Free Span& CP Detection- MPN-Exxon Offshore Location)

Plan, define the project based on milestone, manage and strategies in a safe, timely and ethical manner

Arrange business meetings with prospective clients, promote the company’s services; addressing or predicting clients’ objective

Evaluate quotations from contractors for the implementation of various projects

Leading operations in the implementation of projects for clients

Interface between Client, Contractor, & Subcontractor. Offshore and Onshore Management of the Project

Ensure competent POB, equipment are fit for purpose and follow-up on vendors’ activities

Supervision of Offshore Platform, UFR and OLT subsea structures for integrity purpose.

Supervision of Free span Detection, Cathodic Protection assessment with ROV Survey using DP2 vessel

Preparation and resolution of Technical Queries with Client

Liaise directly with the Captain, Party Chief, ROV Supervisor, Online Surveyor, Reports Co-ordinator, Survey Engineer, Survey Data Processor/Cartographer, CP Supervisor, Data Processor, Inspection Engineer, QHSE, etc) to ensure all contractual obligations are fulfilled

Involved in remedial free span correction analysis on pipeline, pipe crossing and Risers

Participate in supervision of ROV pay out and recovery measures

Position– Senior Subsea Engineer

Company: Saipem Nigeria (Rumuolumeni Fabrication, Construction Yard, Port Harcourt, Lagos and France Office)

7thNovember 2011 – 24th January 2014

Project – Total E&P –Ofon Phase II- A 8 Legs Jacket (Shallow water of 50 meters WD)

Co-Train other Fresh/Junior Engineers on Deep Water Subsea Field Development Design Analysis

Flowline wall thickness sizing analysis for single and PIPipe

Preparation of Flowline/Structures Preliminary Installation Analysis Design Premises/Basis Report

Pipeline failure analysis for empty and flooded case based on design life

Insuring Technical memo for Residual lay tension loads, Flowline minimum allowable curve radius and allowable HOC, TDP tension with specific water depth for Early Design.

Gas Export Normal Laying Analysis for all line type with respect to minimum and maximum water depth

Perform ROV Inspection analysis during pipe laying and seabed structure deployment preliminary

Method and Procedure Statement development for field/site construction and installation

Supervision of Engineering Drawings of Modeled Components Using Full Tekla Modeling Software

Modeling of Components of Jackets such as I-tubes, Risers, Riser Guide, Clamps, Fenders, Flanges, etc with TEKLA

Interface activities with respect to Design and Fabrication Team

Method and Procedure Statement development

General supervision of fabrication, construction and installation to meet design requirements

Position– Senior Subsea Engineer

Company: Saipem S.A (Lagos Office, France Office and Offshore activities)

31stMay 2010 – 28th October 2011

Project - SNEPCO -Bonga North West – J Lay Configuration (Offshore activities with FDS Vessel)

Installation (Empty and Flooded cases) Analysis - 60km2 of Flowlines, with ILTs, FETs, FTA at 1200m WD

Initiation Analysis (Static & Dynamic results for Operational parameters and Limiting vessel motions)

Perform ROV Inspection analysis during pipe laying and seabed structure deployment

Normal Laying Analysis(Static&Dynamic results of current FDS Offset for Minimum and Maximum WD with respect to Allowable Heave Amplitude and Velocity)

Abandon and Recovery Analysis(Static & Dynamic results for Sensitivity study of A&R Head position with respect to WT during Flowline Installation)

SPM analysis and installation

Review Design & Analysis of Pipeline Wall thickness sizing of Flowlines with API 1111

On Bottom Roughness Analysis using SAGE 2D

Free Span Analysis of Flowlines and injection lines using MathCAD and DnV FatFREE

Pipe walking Analysis for Production Flowlines and Injection lines

Lateral Buckling Analysis for Flowlines and injection lines using Analytical method (MathCAD)

Cathodic Protection/Anticorrosion Coatings Analysis

Sensitivity Analysis of On-Bottom Roughness using Sage 2D

Additional activities at Offshore Fabrication Yard and offshore activities with FDS2 & S3000 vessel

Method Engineering Department and interface activities

Erection sequence for FTA/ILT, Jumper, Spool, PLET, PLEM

Method and Procedure Statement development

Pigging and Hydro test activity

Method selection and procedures of Subsea Production system, Stress Analysis for heavy and sensitive lift

Design/fabrication of construction Aids for FTA/ILT, Jumper, Spool and etc

Load-out operation of FTA/ILT, Jumper, Spool and PLET with connection system for FAT

Interpretation and review of offshore pipeline laying MTO.

On-board the vessel pipe laying supervision to meet design requirements of client

Develop HSE Plan for Subsea structural lifting, transportation and installation activities

Position– UFR Engineer (Contract Hire) (Lagos Office and Offshore activities with FDS Vessel)

Company: Saipem Contracting Nigeria Limited

4th February 2009 – 21stMay 2010

Project - Total E&P -USAN Deepwater Development UFR & OLT – J Lay

Participate and contribute in Job Hazard Analysis and Tool box meeting – H S E

Participate on a day – to –day detail job planning for every job

Rigid pipeline thermal expansion calculation and ensuring HSE Design compliance

Seabed Route Design Analysis

Mid-water arch inspection and pipeline repairs stabilisation analysis

Route Profile/Slope Generation Using Geo-UTM Software and Seabed Route Design Analysis

Design and Analysis of rigid Pipeline Wall thickness sizing of Flowlines using Excel VBA

Review of Flowline Design Premise and Design Basis

Review of On Bottom Stability Report of Analysis for Injection and PiP Lines using MathCAD

Flowline Analysis of Free Span and On-bottom Stability using DnV FatFREE & AGA

On-Bottom Roughness Sensitivity Analysis using Sage 2D

Cathodic Protection/Anticorrosion Coatings Analysis

On Bottom Roughness Sensitivity Analysis on the Corridor of Route for WI-S,N; PL-N,S;&GI-S Flowline

Flowlines Free Span Analysis on Production, Gas and Water injection lines with MathCAD & Excel VBA

Free Span Analysis Using DNV Fatfree and Preparation of Spreadsheet for Computation of Damage Ratio

Flowline Free Span, Lateral and Upheaval Buckling Analysis

Review of Pipeline Wall Thickness Sizing of Pipe in Pipe Production and Thermal Expansion Analysis

»Global response Analysis of Single Hybrid Riser SHR System on -Extreme/Storm, Fatigue, & Interference (Stand-by and In-Place) Analysis – Umbilical / Flowline / Riser

Extreme (Storm Response) Analysis

Screening Analysis, Static, Quasi-static and Dynamic Analysis

Result Post-processing and collation, Sensitivity studies

Wave Fatigue Analysis

Critical Wave Period Selection, Static, Quasi-static and Dynamic Analysis

Fatigue life Post processing and Sensitivity studies

Interference/Clashing Analysis

Far and Near Interpolation, Static, Quasi-static and Dynamic analysis

Post-processing of clearance for Adjacent Risers, Far and Near Interpolation Analysis

Modal Analysis (VIV)

Static and Modal Analysis

Knowledgeable in Report writing and Documentation of Quality Assessment of FPSO & SPS

Knowledgeable in Development of sample excel-based Flexcom Keyword generator for Interface.

Knowledgeable in international design codes/standards and TOTAL general specifications

Knowledgeable in Line pipe Material Selection and Pipe protection against anchor drag

Knowledgeable in Rigid Tie-In Spool Design Analysis and Subsea Intervention Activities

Knowledgeable in Case Studies of SCRs, S-type Wave configuration and STTRs

Knowledgeable in Flexibility analysis (Riser and expansion loop design)

Knowledgeable in Pipe protection against earthquake, rock dumping, burial and wave induced liquefaction

Knowledgeable in conventional pipe laying (bottom pull, surface tow) and Pipe Coating

Knowledgeable in Allowable weld repair calculation

Use and Conversant with relevant Design Codes and standard such as –

DNV-OS-F101, DNV CN 30.5, DNV-RP-C203, DNV-OS-F201, DNV-RP-F105, DNV-RP-F109& others

API -5L, API RP 1111, API-17K, API -17J, Draft API RP 17L2 and others

Position– Technical Assistant

Company: Energy Equipment & Services Ltd. Onne (Contract Hire) 22ndSept.’08 – 1st February ‘09

(Onshore & Offshore Project Activities)

Mobilization of materials, personnel to work site and planning of daily activities

Check for Quality control on materials and equipment for documentation and mobilisation to site

Inspection, Maintenance, and NDT on Lifting Equipment for Land, Swamp and Offshore Activities

Lead in daily and weekly meeting on Technical Projects for Onshore & Offshore Projects

Handles all paper works & documentations of the Technical Department in line with Quality System.

Assists the Technical Manager in analysing the potential competition & the Risk in terms of cost.

Assists the Technical Manager in defining the scope & functional statement of the project

Assists the Technical Manager in acquiring, from appropriate sources, confirmation of the availability of the staff and /or facilities needed for the project.

Assists the Technical Manager in defining the project control functions & procedures to be developed.

Assists the Technical Manager in determining the commercial terms & condition of the project contracts

Assists the Technical Manager in the management of staff, preparing work schedules & assigning duties.

Assists the Technical Manager in plans store layout, and designs displays.

Assists the Technical Manager in Pre-commissioning for Onshore & Offshore Projects.

Development and Execution of project forecast with date of completion.

Planning and Execution of project modification start up and supervision

Tracking and analysis of personnel, equipment location and cost duration for all projects.

Position– Oil & Gas Facility/Field Engr.

Company: Globe Inspection Nig. Ltd. (Contract Staff) Jun.’03 – 30th Aug. ‘08

Mobilization of materials and personnel to work site and planning of daily activities.

Coordinate Job Hazard Analysis and Tool box meeting at job site – H S E.

Inspection/Maintenance and NDT of Lifting Equipment at Shell I.A Port Harcourt.

Trouble Shooting on Well Heads at Shell’s Ekulama and Nun River District.

Flow station operations and preventive maintenance at Ekulama and Nun River District.

Leak detection activity after repairs to Valves at Shell’s Agbada and Ekulama Flow Station

Changing Bean at the Well Head at Ekulama and Nun River District.

Commissioning a Control –O-Matic Unit at the Wellhead at Ekulama District.

Prepare tender documents and preliminary design of project.

Pipeline Civil, tie-in and coating works at Agbada District Well X

Troubleshoot and carryout maintenance on Gas Turbine Lubrication system (Shell Nigeria Project)

Trouble Shooting on Well Heads at Shell’s Ekulama and NunRiver District.

Completion of work scope delivery in accordance with the client standard and other recognized International standards – ASTM, ASME, API, ISO 9001, ISO 14001.

Supervision of pipeline pigging operation (Launching & Receiving) at Kolo Creek District.

Repair/replacement/modification of facilities/equipment in flowstation, gas compression stations

Flushing and Pressure testing activities of Pipeline at Kolo Creek District.

Perform the three dimensional (3D) design using Intergraph Plant Design.

3D model integrates 3D basic design information of disciplines, such as equipment, piping and preparation of detailed piping route design.

Inspection, maintenance, and NDT on Lifting Equipment Team B & A {Shell Nigeria Project}

Inspection and Maintenance of generator Plant at Ekulama and Nun River

Desanding and Dewaxing of Pressure vessels at Nun River and Nembe flow station (Shell Port Harcourt project –SPDC).

Position– Mechanical Technician

Company: Smeco Industrial Nigeria Ltd. Jan’96 – Nov’98

Interpretation of modification of drawings

Maintenance and repair of mechanical and rotating equipment, including LNG Loading arms, Diesel engines, Pumps, Cranes and auxiliary equipment, Valves and piping system

Pipeline corrosion control and maintenance activities

Leak valve inspection and troubleshooting on Well Head activities

Projects/Accomplishments:

Exxon Mobil Project – Freespan Detection & Cathodic Protection ROV Survey- Riser, Pipeline, Clamp, etc.

Project – Total E&P –Ofon Phase II- A 8 Legs Jacket -Design phase

Bonga Northwest Project -Shell Nigeria Exploration and Production Company (SNEPCO)

Total E&P -USAN Deepwater Development UFR & OLT – J Lay-Design phase

Ensuring Fit for purpose materials/Equipment and mobilization of competent personnel

Inspection, maintenance, and NDT on Lifting Equipment - SPDC Nigeria

Pipeline Civil, tie-ins and coating works at Agbada District Well X

Flushing &Pressure testing of Pipeline Area B & Supervision of Pipeline leak Repairs.- SPDC

Trouble Shooting on Well Heads at Shell’s Ekulama and Nun River District.- SPDC Nigeria

Training/ Courses Attended:

Protective Coating Inspector Program by The Society for Protective Coating SSPC Sponsored by SCNL

Introduction to Offshore Geophysics and Geotechnical Engineering by SUT and TOTAL S.A Paris

Introduction to Project Management & Multicultural Team Building by First Fossil Limited-SCNL

Problem Solving Techniques Decision Making Skills by First Fossil Limited-SCNL

Decision Making Skills by First Fossil Limited Sponsored by Saipem Contracting Nigeria Limited

Flowline and Riser Subsea Fatigue Analysis by Saipem Contracting Nigeria Limited

Environmental Loading and Conditions & Pipeline Wall thickness Sizing Design by SCNL

FLEXCOM and Riser Analysis by Marine Computational Services (MCS), Parkmore, Galway, UK

Deep Water Project Design and Installation Overview by Saipem S.A (France) Sponsored by S C N Ltd

Subsea Structural Design &Principles of Structural Design by CSL/KWL, Aberdeen, UK -SCNL

Introduction Subsea Engineering Design by CSL, Aberdeen, UK Sponsored by S C N Limited

Introduction to Pipeline Design & Introduction to Riser Design by Saibos/Saipem S.A (France)

NDT Level II with American Society for Non-Destructive Testing (ASNT) in Magnetic Particle Testing by Neo Metal-Analyst & NDT Services, Vile Parle (E) Mumbai, India

REFEREES: Available on request

Contact this candidate